Progressive crushing behavior and energy absorption of a unidirectional CFRP plate under axial compression

References

• Jacob GC, Fellers JF, Simunovic S, et al. Energy absorption in polymer composite materials for automotive crashworthiness. J Compos Mater. 2002;36:813–850.
   Web of Science ®Google Scholar
• Farley GL. The role of fiber and matrix in crash energy absorption of composite materials. J Am Helicopter Soc. 1989;34:52–58.
   Web of Science ®Google Scholar
• Hull D. A unified approach to progressive crushing of fibre reinforced composite tubes. Compos Sci Technol. 1991;40:377–421.
   Web of Science ®Google Scholar
• Hamada H, Ramakrishna S, Saito H. Effect of fiber orientation on the energy absorption capability of carbon fiber/PEEK composite tubes. J Compos Mater. 1996;30:947–963.
   Web of Science ®Google Scholar
• Ochelski S, Gotowicki P. Experimental assessment of energy absorption capability of carbon-epoxy and glass-epoxy composites. Compos Struct. 2008;87:215–224.
   Web of Science ®Google Scholar
• Farley GL. Effect of specimen geometry on the energy absorption capability of composite materials. J Compos Mater. 1986;20:390–400.
   Web of Science ®Google Scholar
• Mamalis AG, Yuan YB, Viegelahn GL. Collapse of thin-wall composite sections subjected to high speed axial loading. Int J Vehicle Des. 1992;13:564–579.
   Web of Science ®Google Scholar
• Hamada H, Ramakrishna S. Scaling effects in the energy absorption of carbon fiber/peek composite tubes. Compos Sci Technol. 1995;55:211–221.
   Web of Science ®Google Scholar
• Jiménez MA, Miravete A, Larrodé E, et al. Effect of trigger geometry on energy absorption in composite profiles. Compos Struct. 2000;48:107–111.
   Web of Science ®Google Scholar
• Sigalas I, Kumosa M, Hull D. Trigger mechanisms in energy-absorbing glass cloth/epoxy tubes. Compos Sci Technol. 1991;40:265–287.
   Web of Science ®Google Scholar
• Thuis HGSJ, Metz VH. The influence of trigger configurations and laminate lay-up on the failure mode of composite crush cylinders. Compos Struct. 1993;25:37–43.
   Web of Science ®Google Scholar
• Farley GL, Wolterman RL, Kennedy JM. The effects of crushing surface roughness on the crushing characteristics of composite tubes. J Am Helicopter Soc. 1992;37:53–60.
   Web of Science ®Google Scholar
• Farley GL. The effects of crushing speed on the energy-absorption capability of composite tubes. J Compos Mater. 1991;25:1314–1329.
   Web of Science ®Google Scholar
• Thornton PH. Energy absorption in composite structures. J Compos Mater. 1979;13:247–262.
   Web of Science ®Google Scholar
• Lavoie JA, Morton J. A crush test fixture for investigating energy absorption of flat composite plates. Exp Tech. 1994;18:23–26.
   Web of Science ®Google Scholar
• Jackson K, Morton J, Lavoie JA, et al. Scalling of energy absorbing composite plates. J Am Helicopter Soc. 1994;39:17–23.
   Web of Science ®Google Scholar
• Bolukbasi AO, Laananen DH. Energy absorption in composite stiffeners. Compos. 1995;26:291–301.
   Google Scholar
• Lavoie JA, Kellas S. Dynamic crush tests of energy-absorbing laminated composite plate. Compos Part A. 1996;27:467–475.
   Web of Science ®Google Scholar
• Fleming DC, Vizzini AJ. The energy absorption of composite plates under off-axis loads. J Compos Mater. 1996;30:1977–1995.
   Web of Science ®Google Scholar
• Dubey DD, Vizzini AJ. Energy absorption of composite plates and tubes. J Compos Mater. 1998;32:158–176.
   Web of Science ®Google Scholar
• Dubey DD, Vizzini AJ. Testing methods for energy absorption of kevlar/epoxy. J Am Helicopter Soc. 1999;44:179–187.
   Web of Science ®Google Scholar
• Daniel L, Hogg PJ, Curtis PT. The relative effects of through-thickness properties and fibre orientation on energy absorption by continuous fibre composites. Compos Part B. 1999;30:257–266.
   Web of Science ®Google Scholar
• Daniel L, Hogg PJ, Curtis PT. The crush behavior of carbon fibre angle-ply reinforcement and the effect of interlaminar shear strength on energy absorption capability. Compos Part B. 2000;31:435–440.
   Web of Science ®Google Scholar
• Jacob GC, Starbuck JM, Simunovic S, et al. New test method for determining energy absorption mechanisms in polymer composite plates. Polym Compos. 2003;24:706–715.
   Web of Science ®Google Scholar
• Fleming DC, Nicot F. Crushing of flat graphite/epoxy laminates using a column specimen. J Compos Mater. 2003;37:2225–2239.
   Web of Science ®Google Scholar
• Savona SC, Hogg PJ. Investigation of plate geometry on the crushing of flat composite plates. Compos Sci Technol. 2006;66:1639–1650.
   Web of Science ®Google Scholar
• Savona SC, Hogg PJ. Effect of fracture toughness properties on the crushing of flat composite plates. Compos Sci Technol. 2006;66:2317–2328.
   Web of Science ®Google Scholar
• Feraboli P, Wade B, Deleo F, et al. Crush energy absorption of composite channel section specimens. Compos Part A. 2009;40:1248–1256.
   Web of Science ®Google Scholar
• Yurgartis SW. Measurement of small angle fiber misalignments in continuous fiber composites. Compos Sci Technol. 1987;30:279–293.
   Web of Science ®Google Scholar
• Iizuka K, Ueda M, Takahashi T, et al. Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression. Adv Compos Mater. 2019;28:73–85.
   Web of Science ®Google Scholar
• Takahashi T, Ueda M, Iizuka K, et al. Simulation on kink-band formation during axial compression of a unidirectional carbon fiber reinforced plastic constructed by X-ray computed tomography images. Adv Compos Mater. 2019;28:347–363.
   Web of Science ®Google Scholar
• Jumahat A, Soutis C, Jones FR, et al. Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Compos Struct. 2010;92:295–305.
   Web of Science ®Google Scholar
• Ueda M, Mimura K, Jeong TK. In situ observation of kink-band formation in a unidirectional carbon fiber reinforced plastic by X-ray computed tomography imaging. Adv Compos Mater. 2016;25:31–43.
   Web of Science ®Google Scholar
• Ueda M, Akiyama M. Compression test of a single carbon fiber in a scanning electron microscope and its evaluation via finite element analysis. Adv Compos Mater. 2019;28:57–71.
   Web of Science ®Google Scholar