References
- Punetha VD, Rana S, Yoo HJ, et al. Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene. Prog Polym Sci. 2017;67:1–47.
- Lee D, Song SH, Hwang J, et al. Enhanced mechanical properties of epoxy nanocomposites by mixing noncovalently functionalized boron nitride nanoflakes. Small. 2013;9:2602–2610.
- Kim J, Han NM, Kim J, et al. Highly conductive and fracture-resistant epoxy composite based on non-oxidized graphene flake aerogel. ACS Appl Mater Interfaces. 2018;43:37507–37516.
- Han NM, Wang Z, Shen X, et al. Graphene size-dependent multifunctional properties of unidirectional graphene aerogel/epoxy nanocomposites. ACS Appl Mater Interfaces. 2018;7:6580–6592.
- Li Y, Umer R, Isakovic A, et al. Synergistic toughening of epoxy with carbon nanotubes and graphene oxide for improved long-term performance. RSC Adv. 2013;3:8849–8856.
- Yu T, Gong Y, Lu T, et al. Recognition of carbon nanotube chirality by phage display. RSC Adv. 2012;2:1466–1476.
- Li Y, Yu T, Pui T, et al. Fabrication and characterization of recyclable carbon nanotube/polyvinyl butyral composite fiber. Compos Sci Technol. 2011;71:1665–1670.
- Kim J, Kim J, Song S, et al. Strength dependence of epoxy composites on the average filler size of non-oxidized graphene flake. Carbon. 2017;113:379–386.
- Li D, Muller MB, Gilje S, et al. Processable aqueous dispersions of graphene nanosheets. Nat Nanotechnol. 2008;3:101–105.
- Yang SY, Lin WN, Huang YL, et al. Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites. Carbon. 2011;49:793–803.
- Wan YJ, Tang LC, Gong LX, et al. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties. Carbon. 2014;69:467–480.
- Ferreira FV, Franceschi W, Menezes BRC, et al. Dodecylamine functionalization of carbon nanotubes to improve dispersion, thermal and mechanical properties of polyethylene based nanocomposites. Appl Surf Sci. 2017;410:267–277.
- Lee CY, Bae JH, Kim TY, et al. Using silane-functionalized graphene oxides for enhancing the interfacial bonding strength of carbon/epoxy composites. Compos Part A: Appl Sci Manufac. 2015;75:11–17.
- Ramezanzadeh B, Ghasemi E, Mahdavian M, et al. Characterization of covalently-grafted polyisocyanate chains onto graphene oxide for polyurethane composites with improved mechanical properties. Chem Engg J. 2015;281:869–883.
- Li WK, Dichiara A, Bai JB. Carbon nanotube–graphene nanoplatelet hybrids as high-performance multifunctional reinforcements in epoxy composites. Compos Sci Technol. 2013;74:221–227.
- TabkhPaz M, Shajari S, Mahmoodi M, et al. Thermal conductivity of carbon nanotube and hexagonal boron nitride polymer composites. Compos Part B Eng. 2016;100:19–30.
- Nguyen DD, Tai NH, Chen SY, et al. Controlled growth of carbon nanotube–graphene hybrid materials for flexible and transparent conductors and electron field emitters. Nanoscale. 2012;4:632–638.
- Zhang C, Huang S, Tjiu WW, et al. Facile preparation of water-dispersible graphene sheets stabilized by acid-treated multi-walled carbon nanotubes and their poly(vinyl alcohol) composites. J Mater Chem. 2012;22:2427–2434.
- Ren PG, Di YY, Zhang Q, et al. Composites of ultrahigh‐molecular‐weight polyethylene with graphene sheets and/or MWCNTs with segregated network structure: preparation and properties. Macromol Mater Eng. 2012;297:437–443.
- Zhang S, Yin S, Rong C, et al. Synergistic effects of functionalized graphene and functionalized multi-walled carbon nanotubes on the electrical and mechanical properties of poly(ether sulfone) composites. Eur Polym J. 2013;49:3125–3134.
- Verma M, Chauhan SS, Dhawan SK, et al. Graphene nanoplatelets/carbon nanotubes/polyurethane composites as efficient shield against electromagnetic polluting radiations. Compos Part B Eng. 2017;120:118–127.
- Han NR, Cho JW. Effect of click coupled hybrids of graphene oxide and thin-walled carbon nanotubes on the mechanical properties of polyurethane nanocomposites. Compos Part A: Appl Sci Manufac. 2018;109:376–381.
- Pokharel P, Xiao D, Erogbogbo F, et al. A hierarchical approach for creating electrically conductive network structure in polyurethane nanocomposites using a hybrid of graphene nanoplatelets, carbon black and multi-walled carbon nanotubes. Compos Part B Eng. 2019;161:169–182.
- Bagotia N, Choudhary V, Sharma DK. Synergistic effect of graphene/multiwalled carbon nanotube hybrid fillers on mechanical, electrical and EMI shielding properties of polycarbonate/ethylene methyl acrylate nanocomposites. Compos Part B Eng. 2019;159:378–388.
- Wegrzyn M, Ortega A, Benedito A, et al. Thermal and electrical conductivity of melt mixed polycarbonate hybrid composites co‐filled with multi‐walled carbon nanotubes and graphene nanoplatelets. Appl Polym Sci. 2015;132:42536–42543.
- Min C, Liu D, Shen C, et al. Unique synergistic effects of graphene oxide and carbon nanotube hybrids on the tribological properties of polyimide nanocomposites. Tribol Int. 2018;117:217–224.
- Cha J, Kim J, Ryu S, et al. Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets. Compos Part B Eng. 2019;162:283–288.
- Qi Z, Tan Y, Zhang Z, et al. Synergistic effect of functionalized graphene oxide and carbon nanotube hybrids on mechanical properties of epoxy composites. RSC Adv. 2018;8:38689–38700.
- Hummers WS, Offeman RE. Preparation of graphitic oxide. J Am Chem Soc. 1958;80:1339−1339.
- Chen BK, Su CT, Tseng MC, et al. Preparation of polyetherimide nanocomposites with improved thermal, mechanical and dielectric properties. Polym Bull. 2006;57:671–681.
- Liu T, Tong Y, Zhang WD. Preparation and characterization of carbon nanotube/polyetherimide nanocomposite films. Compos Sci Technol. 2007;67:406–412.
- Wang J, Liang S, Ma L, et al. One-pot synthesis of CdS–reduced graphene oxide 3D composites with enhanced photocatalytic properties. Cryst Eng Comm. 2014;16:399–405.
- Choukourov A, Hanusˇ J, Kousal J, et al. Thin polymer films from polyimide vacuum thermal degradation with and without a glow discharge. Vacuum. 2006;80:923–929.
- Pham TA, Kim JS, Kim JS, et al. One-step reduction of graphene oxide with l-glutathione. Colloids Surf A. 2011;384:543–548.
- Amancio-Filho ST, Roeder J, Nunes SP, et al. Thermal degradation of polyetherimide joined by friction riveting (FricRiveting). Part I: influence of rotation speed. Polym Degrad Stab. 2008;93:1529–1538.
- Gu XJ. Raman spectroscopy and the effects of ultraviolet irradiation on polyimide film. Appl Phys Lett. 1993;62:1568–1570.
- Sahre K, Eichhorn KJ, Simon F, et al. Characterization of ion-beam modified polyimide layers. Surf Coatings Technol. 2001;139:257–264.
- Savatinova I, Tonchev S, Todorov R, et al. Polyimide thin‐film waveguides: optical and Raman spectroscopic studies. J Appl Phys. 1990;67:2051–2056.
- Ishida H, Huang MT. Infrared spectral assignments for a semicrystalline thermoplastic polyimide. Spectrochim Acta. 1995;51:319–331.
- Kumar S, Sun LL, Caceres S, et al. Dynamic synergy of graphitic nanoplatelets and multi-walled carbon nanotubes in polyetherimide nanocomposites. Nanotechnology. 2010;21:105702–105710.
- Araby S, Saber N, Ma X, et al. Implication of multi-walled carbon nanotubes on polymer/graphene composites. J Mater Design. 2015;65:690–699.
- Al-Saleh MH. Electrical and mechanical properties of graphene/carbon nanotube hybrid nanocomposites. Synth Met. 2015;209:41.
- Ma L, Wang G, Dai J. Influence of structure of amines on the properties of amines‐modified reduced graphene oxide/polyimide composites. J Apply Polym Sci. 2016;133:43820–43828.
- Wang J, Jin X, Wu H. Polyimide reinforced with hybrid graphene oxide @ carbon nanotube: toward high strength, toughness, electrical conductivity. Carbon. 2017;123:502–513.
- Zhao X, Zhang Q, Chen D. Enhanced mechanical properties of graphene-based poly(vinyl alcohol) composites. Macromolecules. 2010;43:2357–2363.
- Rafiee MA, Lu W, Thomas AV, et al. Graphene nanoribbon composites. ACS Nano. 2010;4:7415–7420.
- Rafiee MA, Rafiee J, Wang Z, et al. Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano. 2009;3:3884–3890.
- Suk JW, Piner RD, An J, et al. Mechanical properties of monolayer graphene oxide. ACS Nano. 2010;4:6557–6564.
- Choudhury A. Preparation and characterization of nanocomposites of poly-p-phenylene benzobisthiazole with graphene nanosheets. RSC Adv. 2014;4:8856–8866.