The influence of aircraft fluid ingression on tensile properties of aramid fiber composites

References

• Mahbub RF, Ratnapandian S, Wang LJ, et al. Evaluation of comfort properties of coated Kevlar®/wool ballistic fabric. Adv Mater Res. 2013;821:342–347.
   Google Scholar
• Kececi E, Asmatulu R. Effects of moisture ingression on polymeric laminate composites and its prevention via highly robust barrier films. Int J Adv Manuf Technol. 2014;73(9–12):1657–1664.
   Web of Science ®Google Scholar
• Chowdhury SC, Gillespie JW Jr. A molecular dynamics study of the effects of hydrogen bonds on mechanical properties of Kevlar® crystal. Comput Mater Sci. 2018;148:286–300.
   Web of Science ®Google Scholar
• Augl JM. Moisture sorption and diffusion in Kevlar® 49 Aramid Fiber. Report, Naval Surface Weapons Center White Oak Lab, MD; 1979 Mar.
   Google Scholar
• Saijo K, Arimoto O, Hashimoto T, et al. Moisture sorption mechanism of aromatic polyamide fibres: diffusion of moisture into regular Kevlar® as observed by time-resolved small-angle X-ray scattering technique. Polymer. 1994;35(3):496–503.
   Web of Science ®Google Scholar
• Fukuda M, Ochi M, Miyagawa M, et al. Moisture sorption mechanism of aromatic polyamide fibers: stoichiometry of the water sorbed in poly (para-phenylene terephthalamide) fibers1. Text Res J. 1991;61(11):668–680.
   Web of Science ®Google Scholar
• Varelidis PC, Papakostopoulos DG, Pandazis CI, et al. Polyamide coated Kevlar®™ fabric in epoxy resin: mechanical properties and moisture absorption studies. Compos Part A Appl Sci Manuf. 2000;31(6):549–558.
   Web of Science ®Google Scholar
• Busygin KN, Grebennikov SF, Kashirskii DA, et al. Predicting the properties of polymeric materials exposed to moisture and thermal loading. Fibre Chem. 2015;47(4):329–336.
   Web of Science ®Google Scholar
• Ibrahim MH, Hassan MZ, Ibrahim I, et al. Seawater infiltration effect on thermal degradation of fiber reinforced epoxy composites. AIP Conf Proc. 2018;1958:020006.
   Google Scholar
• Allred RE, Roylance DK. Transverse moisture sensitivity of aramid/epoxy composites. J Mater Sci. 1983;18(3):652–656.
   Web of Science ®Google Scholar
• Akay M, Mun SK, Stanley A. Influence of moisture on the thermal and mechanical properties of autoclaved and oven-cured Kevlar®-49/epoxy laminates. Compos Sci Technol. 1997;57(5):565–571.
   Web of Science ®Google Scholar
• Ramesh C, Ragesh H, Arumugam V, et al. Effect of hydrolytic ageing on Kevlar®/polyester using acoustic emission monitoring. J Nondestr Eval. 2012;31(2):140–147.
   Web of Science ®Google Scholar
• Shubha M, Parimala HV, Vijayan K. Moisture uptake by Keviar fibres. J Mater Sci Lett. 1993;12(1):60–62.
   Google Scholar
• Fukuda M, Kawai H. Effect of water on the crystal structure of regular Kevlar®. Sen’i Gakkaishi. 1996;52(11):582–590.
   Web of Science ®Google Scholar
• Fukuda M. Diffusion of moisture in poly (p-phenylene terephthalamide) film: analysis by the adsorption‐controlled diffusion equation. Polym Eng Sci. 1996;36(4):558–567.
   Web of Science ®Google Scholar
• Haque A, Mahmood S, Walker L, et al. Moisture and temperature induced degradation in tensile properties of Kevlar®-graphite/epoxy hybrid composites. J Reinf Plast Compos. 1991;10(2):132–145.
   Web of Science ®Google Scholar
• Aronhime MT, Neumann S, Marom G. The anisotropic diffusion of water in Kevlar®-epoxy composites. J Mater Sci. 1987;22(7):2435–2446.
   Web of Science ®Google Scholar
• Roylance ME. The effect of moisture on the fatigue resistance of an aramid/epoxy composite. Polym Eng Sci. 1982;22(15):988–993.
   Web of Science ®Google Scholar
• Leal AA, Deitzel JM, McKnight SH, et al. Effect of hydrogen bonding and moisture cycling on the compressive performance of poly-pyridobisimidazole (M5) fiber. Polymer. 2009;50(13):2900–2905.
   Web of Science ®Google Scholar
• Allred RE. The effects of temperature and moisture content on the flexural response of Kevlar/epoxy laminates: part II [45/0/90] filament orientation. Environ Eff Compos Mater. 1984;2:43.
   Google Scholar
• Steve J. Meta and para aramid physical property comparison. Service Thread; 2018. [cited 2019 Aug 29]. Available from: https://www.servicethread.com/blog/meta-and-para-aramid-yarn-comparison
   Google Scholar
• Wang H, Xie H, Hu Z, et al. The influence of UV radiation and moisture on the mechanical properties and micro-structure of single Kevlar® fibre using optical methods. Polym Degrad Stab. 2012;97(9):1755–1761.
   Web of Science ®Google Scholar
• Tuttle ME. Moisture diffusion in honeycomb core sandwich composites. International Conference on Composite Materials; 2009 Jul 27–31; Edinburgh, United Kingdom.
   Google Scholar
• Kim G, Sterkenburg R. Investigating the effects aviation fluids have on the flatwise compressive strength of Nomex® honeycomb core material. J Sandwich Struct. Mater. 2019 Mar 14. DOI:10.1177/1099636219836645.
   Web of Science ®Google Scholar
• Kim G, Sterkenburg R, Tsutsui W. Investigating the effects of fluid intrusion on Nomex® honeycomb sandwich structures with carbon fiber facesheets. Compos Struct. 2018;206:535–549.
   Web of Science ®Google Scholar
• ASTM 3039. Standard test method for tensile properties of polymer matrix composite materials.
   Google Scholar
• ASTM 7812. Standard test method for tensile testing of aramid paper.
   Google Scholar
• Yoneyama S, Murasawa G. Digital image correlation. In: Freire JF, editor. Experimental mechanics. Oxford: Encyclopedia of Life Support System (EOLSS) Publishers; 2009.
   Google Scholar