References
- Swain PTR, Biswas S. Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler [Internet]. J Compos Mater SAGE Publications Ltd; 2017 [cited 2021 May 29];51(28): 3909–3922. Available from https://journals.sagepub.com/doi/https://doi.org/10.1177/0021998317695420
- Bhuvaneshwaran M, Pavayee Subramani S, Kumar Palaniappan S, et al. Natural cellulosic fiber from coccinia indica stem for polymer composites: extraction and characterization. J Nat Fibers [Internet]. 2021 [cited 2021 Jun 29];18(5):644–652. Available from https://www.tandfonline.com/action/journalInformation?journalCode=wjnf20
- Durowaye SI, Lawal GI, Sekunowo OI, et al. Synthesis and characterisation of hybrid polyethylene terephthalate matrix composites reinforced with entada mannii fibre particles and almond shell particles. 2019 [cited 2021 Jun 29];31:305–313. Available from https://sci-hub.ren/https://www.sciencedirect.com/science/article/pii/S1018363917301307
- Awais H, Nawab Y, Amjad A, et al. Environmental benign natural fibre reinforced thermoplastic composites: a review. Compos Part C Open Access [Internet]. 2020 [cited 2021 Jul 1];100082. Available from https://sci-hub.ren/https://www.sciencedirect.com/science/article/pii/S2666682020300827
- Nam TH, Ogihara S, Nakatani H, et al. Mechanical and thermal properties and water absorption of jute fiber reinforced poly(butylene succinate) biodegradable composites. Adv Compos Mater. 2012;21(3):241–258.
- Bhatia S, Angra S, Khan S. A review on mechanical and tribological characterization of boron carbide reinforced epoxy composite.Adv Compos Mater [Internet]. 2021;30(4):307–337. Available from DOI:https://doi.org/10.1080/09243046.2020.1759482.
- Nam TH, Ogihara S, Kobayashi S. Interfacial, mechanical and thermal properties of coir fiber-reinforced Poly(Lactic Acid) Biodegradable composites. Adv Compos Mater. 2012;21(1):103–122.
- Cai M, Takagi H, Nakagaito AN, et al. Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites. Compos Part A Appl Sci Manuf. 2016;90:589–597.
- Boopalan M, Niranjanaa M, Umapathy MJ. Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites. Compos Part B Eng. 2013;51:54–57.
- Prasad V, Joseph MA, Sekar K. Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition. Compos Part A Appl Sci Manuf. 2018;115:360–370.
- Anbukarasi K, Kalaiselvam S. Study of effect of fibre volume and dimension on mechanical, thermal, and water absorption behaviour of luffa reinforced epoxy composites. Mater Des [Internet]. 2015 [cited 2021 Jul 1];66:321–330. Available from https://sci-hub.ren/https://www.sciencedirect.com/science/article/pii/S0261306914008668
- Kala T, Maharshi K, Patel S, et al. Electromagnetic and mechanical characterization of iron reinforced natural fiber composites for microwave absorbing applications. Adv Compos Mater [Internet]. 2021;1–11. Available from DOI:https://doi.org/10.1080/09243046.2021.1904345.
- Yan L, Chouw N, Huang L, et al. Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious. Constr Build Mater [Internet]. 2016 [cited 2021 Jun 29];112:168–182. Available from https://sci-hub.ren/https://www.sciencedirect.com/science/article/pii/S0950061816302409
- Awais H, Nawab Y, Amjad A, et al. Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites. Compos Part B Eng [Internet]. 2019 [cited 2021 Jun 29];177:107279. Available from https://linkinghub.elsevier.com/retrieve/pii/S1359836819326666
- Sepe R, Bollino F, Boccarusso L, et al. Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites. Compos Part B Eng. 2018;133:210–217.
- Mohanta N, Acharya SK. Investigation of mechanical properties of luffa cylindrica fibre reinforced epoxy hybrid composite. Int J Eng Sci Technol. 1970;7(1):1–10.
- Chen Y, Su N, Zhang K, et al. Effect of fiber surface treatment on structure, moisture absorption and mechanical properties of luffa sponge fiber bundles. Ind Crops Prod. 2018;114:123.
- Huner U. Effect of chemical surface treatment on flax-reinforced epoxy composite. J Nat Fibers. [Internet]. 2018 [cited 2021 Jun 29];15(6):808–821. Available from https://www.tandfonline.com/action/journalInformation?journalCode=wjnf20
- Hai NM, Kim BS, Lee S. Effect of NaOH treatments on jute and coir fiber PP composites. Adv Compos Mater. 2009;18(3):197–208.
- Huo S, Thapa A, Ulven CA. Effect of surface treatments on interfacial properties of flax fiber-reinforced composites. Adv Compos Mater. 2013;22(2):109–121.
- Asumani O, Paskaramoorthy R. Fatigue and impact strengths of kenaf fibre reinforced polypropylene composites: effects of fibre treatments.Adv Compos Mater [Internet]. 2021;30(2):103–115. Available from DOI:https://doi.org/10.1080/09243046.2020.1733308.
- Cho D, Seo JM, Lee HS, et al. Property improvement of natural fiber-reinforced green composites by water treatment. Adv Compos Mater Off J Japan Soc Compos Mater. 2007;16. 299–314.
- Eslami-Farsani R. Effect of fiber treatment on the mechanical properties of date palm fiber reinforced PP/EPDM composites.Adv Compos Mater [Internet]. 2015;24(1):27–40. Available from. DOI:https://doi.org/10.1080/09243046.2013.871177.
- Khan J, Mariatti M. The influence of substrate functionalization for enhancing the interfacial bonding between graphene oxide and nonwoven polyester. Fibers Polym. [Internet]. 2021 [cited 2021 Jun 10];1–11. Available from https://link.springer.com/https://doi.org/10.1007/s12221-021-1386-y
- Gupta A. Improvement of physiochemical properties of short bamboo fiber-reinforced composites using ceramic fillers. J Nat Fibers [Internet]. 2020 [cited 2021 Jun 29];17(11):1582–1593. Available from https://www.tandfonline.com/action/journalInformation?journalCode=wjnf20
- Soundhar A, Kandasamy J. Mechanical, chemical and morphological analysis of crab shell/sisal natural fiber hybrid composites. J Nat Fibers. 2021;18(10):1518–1532.
- Manimaran P, Jeyasekaran AS, Purohit R, et al. An experimental and numerical investigation on the mechanical properties of addition of wood flour fillers in red banana peduncle fiber reinforced polyester composites. J Nat Fibers. 2020;17(8):1140–1158.
- Karthik Babu NB, Muthukumaran S, Arokiasamy S, et al. Thermal and mechanical behavior of the coir powder filled polyester micro-composites. J Nat Fibers. 2020;17(7):1058–1068.
- Sathishkumar GK, Rajkumar G, Srinivasan K, et al. Structural analysis and mechanical properties of lignite fly-ash-added jute-epoxy polymer matrix composite. J Reinf Plast Compos [Internet]. 2018 [cited 2021 Jun 29];37(2):90–104. Available from https://sci-hub.ren/https://journals.sagepub.com/doi/abs/https://doi.org/10.1177/0731684417735183
- Srivabut C, Ratanawilai T, Hiziroglu S. Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber. Constr Build Mater. 2018;162:450–458.
- Rosamah E, Hossain MS, Abdul Khalil HPS, et al. Properties enhancement using oil palm shell nanoparticles of fibers reinforced polyester hybrid composites. Adv Compos Mater [Internet]. 2017;26(3):259–272. Available from DOI:https://doi.org/10.1080/09243046.2016.1145875.
- Alamri H, Low IM. Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites. Polym Test. 2012;31(5):620–628.
- Arabli V, Aghili A. The effect of silica nanoparticles, thermal stability, and modeling of the curing kinetics of epoxy/silica nanocomposite.Adv Compos Mater [Internet]. 2015;24(6):561–577. Available from
- Ganapathy T, Sathiskumar R, Sanjay MR, et al. Effect of graphene powder on banyan aerial root fibers reinforced epoxy composites. J Nat Fibers [Internet]. 2021 [cited 2021 May 29];18(7):1029–1036. Available from https://www.tandfonline.com/action/journalInformation?journalCode=wjnf20
- Awais H, Nawab Y, Amjad A, et al. Fabrication and characterization of lightweight engineered polypropylene composites using silica particles and flax woven comingled structure. Lect Notes Mech Eng. 2020; 403–410.
- Amjad A, Awais H, Ali MZ, et al. Effect of Alumina nanofiller on the mechanical properties of 2D Woven Biotex Flax/PLA fiber-reinforced nanocomposite. Lect Notes Mech Eng [Internet]. Springer, Singapore; 2020 [cited 2020 Jun 27];383–391. Available from https://link.springer.com/chapter/https://doi.org/10.1007/978-981-15-4756-0_32
- Khan J, Momin SA, Mariatti M. A review on advanced carbon-based thermal interface materials for electronic devices. Carbon N Y. 2020 October;30:65–112. Elsevier Ltd.
- Khan J, Jaafar M. Reduction efficiencies of natural substances for reduced graphene oxide synthesis. J Mater Sci. 2021;56(33):18477–18492.
- Nikmatin S, Syafiuddin A, Hong Kueh AB, et al. Physical, thermal, and mechanical properties of polypropylene composites filled with rattan nanoparticles. J Appl Res Technol. 2017; 15.
- Abenojar J, Tutor J, Ballesteros Y, et al. Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites. Compos Part B Eng. 2017;120:42–53.
- Özdemir T, Güngör A, Akbay IK, et al. Nano lead oxide and epdm composite for development of polymer based radiation shielding material: gamma irradiation and attenuation tests. Radiat Phys Chem. 2018;144:248–255.
- Kumar KD. M S. Enhancement of flexural strength of glass-nylon fibre hybrid composites using alumina nano filler.Mater Res Innov [Internet]. 2021;25(6):338–341. Available from DOI:https://doi.org/10.1080/14328917.2020.1816368.
- Raghavendra G, Ojha S, Acharya SK, et al. Influence of micro/nanofiller alumina on the mechanical behavior of novel hybrid epoxy nanocomposites. High Perform Polym. 2015;27(3):342–351.
- Swain PTR. Physical and mechanical behavior of Al2O3 filled jute fiber reinforced epoxy composites. Int J Curr Eng Technol. 2014;2(2):67–71.
- Hornak J, Trnka P, Kadlec P, et al. Magnesium oxide nanoparticles: dielectric properties, surface functionalization and improvement of epoxy-based composites insulating properties. Nanomaterials. 2018;8(6):1–17.
- Gholampour A, Ozbakkaloglu T. A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. J Mater Sci. Springer New York LLC. 2020;55(3):829–892.
- Ashok KG, Kalaichelvan K, Damodaran A. Effect of nano fillers on mechanical properties of Luffa fiber epoxy composites.J Nat Fibers [Internet]. 2020;1–18. Available from DOI:https://doi.org/10.1080/15440478.2020.1779898.
- Vinayagamoorthy R. Influence of fiber surface modifications on the mechanical behavior of Vetiveria zizanioides reinforced polymer composites. J Nat Fibers. [Internet]. 2019 [cited 2020 Jul 19];16(2):163–174. Available from https://www.tandfonline.com/doi/full/https://doi.org/10.1080/15440478.2017.1410513
- Manjunath M, Renukappa NM, Suresha B. Influence of micro and nanofillers on mechanical properties of pultruded unidirectional glass fiber reinforced epoxy composite systems. J Compos Mater. 2016;50(8):1109–1121.
- Hosseini SB, Review: A. Nanomaterials as a filler in natural fiber reinforced composites.J Nat Fibers [Internet]. 2017;14(3):311–325. Available from DOI:https://doi.org/10.1080/15440478.2016.1212765.
- Dilfi A, Balan A, Bin H, et al. Effect of surface modification of jute fiber on the mechanical properties and durability of jute fiber-reinforced epoxy composites. Polym Compos. 2018;39(S4):E2519–E2528.
- Gogoi R, Tyagi AK. Surface modification of jute fabric by treating with silane coupling agent for reducing its moisture regain characteristics.J Nat Fibers [Internet]. 2019:1–10. Available from DOI:https://doi.org/10.1080/15440478.2019.1658252.
- Cruz J, Fangueiro R. Surface modification of natural fibers: a review.Procedia Eng [Internet]. 2016;155:285–288. Available from DOI:https://doi.org/10.1016/j.proeng.2016.08.030.
- Prasob PA, Sasikumar M. Static and dynamic behavior of jute/epoxy composites with ZnO and TiO2 fillers at different temperature conditions.Polym Test [Internet]. 2018;69:52–62. Available from DOI:https://doi.org/10.1016/j.polymertesting.2018.04.040.
- Omar MF, Akil HM, Ahmad ZA. Static and dynamic compressive properties of mica/polypropylene composites.Mater Sci Eng A [Internet]. 2011;528(3):1567–1576. Available from DOI:https://doi.org/10.1016/j.msea.2010.10.071.
- Li Y, Zhong J, Fu K. Low-velocity impact and compression-after-impact behaviour of flax fibre-reinforced composites.Acta Mech Solida Sin [Internet]. 2020;33(4):431–448; Available from DOI:https://doi.org/10.1007/s10338-019-00158-8.
- Prasath KA, Arumugaprabu V, Amuthakkannan P, et al. Low velocity impact, compression after impact and morphological studies on flax fiber reinforced with basalt powder filled composites. Mater Res Express. 2019;7(1):015317 .
- Noorunnisa Khanam P, Ramachandra Reddy G, Raghu K, et al. Tensile, flexural, and compressive properties of coir/silk fiber-reinforced hybrid composites. J Reinf Plast Compos. 2010;29(14):2124–2127. DOI:https://doi.org/10.1177/0731684409345413.
- He H, Zhang Z, Wang J, et al. Compressive properties of nano-calcium carbonate/epoxy and its fibre composites. Compos Part B Eng [Internet]. 2013;45(1):919–924. Available from DOI:https://doi.org/10.1016/j.compositesb.2012.09.050.
- Awais H, Nawab Y, Anjang A, et al. Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites. Compos Part B Eng. 2020;195:108069.
- Chaudhary V, Bajpai PK, Maheshwari S. Effect of moisture absorption on the mechanical performance of natural fiber reinforced woven hybrid bio-composites. J Nat Fibers. [Internet]. 2020 [cited 2020 Apr 9];17(1):84–100. Available from https://www.tandfonline.com/doi/full/https://doi.org/10.1080/15440478.2018.1469451
- Rashid B, Leman Z, Jawaid M, et al. Effect of treatments on the physical and morphological properties of SPF/Phenolic composites. J Nat Fibers [Internet]. 2017;14(5):645–657. Available from DOI:https://doi.org/10.1080/15440478.2016.1266291.
- Das G, Biswas S. Physical, mechanical and water absorption behaviour of coir fiber reinforced epoxy composites filled with Al2O3 particulates.IOP Conf Ser Mater Sci Eng Institute of Physics Publishing.2016;115:012012; DOI:https://doi.org/10.1088/1757-899X/115/1/012012.
- Ferreira DP, Cruz J, Fangueiro R. Surface modification of natural fibers in polymer composites [Internet]. Green Compos Automot Appl. Elsevier Ltd; 2019. Available from DOI:https://doi.org/10.1016/B978-0-08-102177-4.00001-X.
- Ibrahim ID, Jamiru T, Sadiku ER, et al. Impact of surface modification and nanoparticle on sisal fiber reinforced polypropylene nanocomposites. J Nanotechnol. 2016;2016:1–9.
- Samariha A, Hemmasi AH, Ghasemi I, et al. Effect of nanoclay contents on properties, of bagasse flour/reprocessed high density polyethylene/nanoclay composites. Maderas Cienc y Tecnol. 2015;(ahead): DOI:https://doi.org/10.4067/S0718-221X2015005000056.
- Singh JIP, Singh S, Dhawan V. Effect of alkali treatment on mechanical properties of jute fiber-reinforced partially biodegradable green composites using epoxy resin matrix. Polym Polym Compos [Internet]. 2019 [cited 2020 Feb 13];388–397. Available from http://journals.sagepub.com/doi/https://doi.org/10.1177/0967391119880046
- Saba N, Paridah MT, Abdan K, et al. Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites. Constr Build Mater [Internet]. 2016;123:15–26. Available from DOI:https://doi.org/10.1016/j.conbuildmat.2016.06.131.