References
- Rion J. Ultra-light photovoltaic composite sandwich structures. PhD Thesis, Ecole polytechnique fédérale de Lausanne (EPFL), Switzerland, 2008.
- Ramnath BV. Review on sandwich composite and their applications. Mater Today Proc. 2019;16:370–384.
- Yoshida K, Aoki T. Analysis of sandwich single cantilever beam test specimen with graded core. Adv Compos Mater. 2021. DOI:https://doi.org/10.1080/09243046.2021.1907037 (article in press).
- Manjunath RN, Khatkar V, Behera BK. Influence of augmented tuning of core architecture in 3D woven sandwich structures on flexural and compression properties of their composites. Adv Compos Mater. 2020;29:317–333.
- Alia RA, Rao S, Cantwell WJ. Compressive testing of reinforced Nomex honeycomb at elevated temperatures. Adv Compos Mater. 2020;29:335–350.
- Park JW, Cho JU. Experiment and analysis of unidirectional CFRP with a hole and crack as sandwich-form inhomogeneous composite. Adv Compos Mater. 2019;28:103–114.
- Bao L, Miura Y, Kemmochi K. Improving bending characteristics of FRP sandwich structures with reinforcement webs. Adv Compos Mater. 2018;27:221–233.
- Syed AK, Ijaz H, Shah RMBR. Experimental and numerical analysis of flexural and impact behaviour of glass/pp sandwich panel for automotive structural applications. Adv Compos Mater. 2018;27:367–386.
- Yoshida K, Uchida K, Nishita Y, et al. Suppression of initial failure at tapered end-closure sandwich panel joint by taper angle change. Adv Compos Mater. 2017;26:375–390.
- Yokozeki T, Iwamoto K. Effects of core machining configuration on the debonding toughness of foam core sandwich panels. Adv Compos Mater. 2016;25:45–58.
- Ishikawa M, Irokawa C, Kogo Y, et al. Time-dependent deformation of ROHACELL-core CFRP sandwich panels. Adv Compos Mater. 2016;25:271–286.
- Zied K, Al-Grafi M. Design of auxetic sandwich panel faceplates comprising cellular networks with high stiffness and negative Poisson’s ratio. Adv Compos Mater. 2015;24:175–196.
- Rion J, Leterrier Y, Manson JAE, et al. Ultra-light asymmetric photovoltaic sandwich structures. Compos PT A. 2009;40:1167–1173.
- Keller T, Vassilopoulos AP, Manshadi BD. Thermomechanical behavior of multifunctional GFRP sandwich structures with encapsulated photovoltaic cells. J Compos Constr. 2010;14:470–478.
- Pascual C, De Castro J, Schueler A, et al. Total light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures. J Compos Mater. 2014;48:3591–3604.
- Pascual C, De Castro J, Schueler A, et al. Integration of dye solar cells in load-bearing translucent glass fiber-reinforced polymer laminates. J Compos Mater. 2017;51:939–953.
- Martins AC, Chapuis V, Virtuani A, et al. Thermo-mechanical stability of lightweight glass-free photovoltaic modules based on a composite substrate. Sol Energy Mater Sol Cells. 2018;187:82–90.
- Martins AC, Chapuis V, Sculati-Meillaud F, et al. Light and durable: composite structures for building‐integrated photovoltaic modules. Prog Photovolt Res Appl. 2018;26:718–729.
- Pavlović A, Sintoni D, Minak G, et al. On the modal behaviour of ultralight composite sandwich automotive panels. Compos Struct. 2020;248:112523.
- Pavlović A, Sintoni D, Fragassa C, et al. Multi-objective design optimization of the reinforced composite roof in a solar vehicle. Appl Sci. 2020;10:2665.
- Zhang X, Sun K, Xu D, et al. Lightweight photovoltaic composite structure on stratospheric airships. Adv Mater Sci Eng. 2018;2018:1294205.
- Sharma R. Effect of obliquity of incident light on the performance of silicon solar cells. Heliyon. 2019;5:e01965.
- Sjerps-Koomen EA, Alsema EA, Turckenburg WC. A simple model for PV module reflection losses under field conditions. Sol Energy. 1996;57:421–432.
- Soga K, Akasaka H. Influences of solar incident angle on power generation efficiency of PV modules under field conditions. J Asian Archit Build. 2003;2:43–48.
- Chander S, Purohit A, Sharma A, et al. Impact of temperature on performance of series and parallel connected mono-crystalline silicon solar cells. Energy rep. 2015;1:175–180.
- Radziemska. The effect of temperature on the power drop in crystalline silicon solar cells. Renew Energy. 2003;28:1–12.
- Hsu ST, Wu TC. Simulated wind action on photovoltaic module by non-uniform dynamic mechanical load and mean extended wind load. Energy Procedia. 2017;130:94–101.
- Zhu L, Raman A, Wang KX, et al. Radiative cooling of solar cells. Optica. 2014;1:32–38.
- MakeItFrom.com. Ethylene Tetrafluoroethylene (ETFE), https://www.makeitfrom.com/material-properties/Ethylene-Tetrafluoroethylene-ETFE (cited 2020 Dec 30).
- Fabric 360. What is ETFE?:, https://www.fabrix360.com/what-is-etfe cited 2020 Dec 30.
- Omnexus. EVA properties: ethylene vinyl acetate properties, https://omnexus.specialchem.com/selection-guide/ethylene-vinyl-acetate/properties-of-eva cited 2020 Dec 30.
- Ruiz-Reina E, Sidrach-de-Cardona M, Piliougine M. Heat transfer and working temperature field of a photovoltaic panel under realistic environmental conditions. Comsol Technical Papers and Presentations, https://www.comsol.com/paper/heat-transfer-and-working-temperature-field-of-a-photovoltaic-panel-under-realis-18983 2014, (accessed 2020 Dec 30).
- Liang Z, Hua-Min Q. Mechanical research and development of monocrystalline silicon neutron beam window for CSNS. Chin Phys C. 2015;39:096001.
- The Ioffe Physicotechnical Institute. Thermal properties of Silicon (Si), http://www.ioffe.ru/SVA/NSM/Semicond/Si/thermal.html (cited 2020 Dec 30).
- Awaja F, Pavel D. Recycling of PET. Eur Polym J. 2005;41:1453–1477.
- Goodfellow. Polyethylene terephthalate (Polyester, PET, PETP), http://www.goodfellow.com/E/Polyethylene-terephthalate.html (cited 2020 Dec 30).
- Polymer Database. Unfilled Polyethylene Terephthalate (PET), https://polymerdatabase.com/Commercial%20Polymers/PET.html (cited 2020 Dec 30).
- MatWeb. Aluminum, Al, http://www.matweb.com/search/datasheet.aspx?bassnum=AMEAL00 (cited 2020 Dec 30).
- Haris A, Lee HP. Finite element analysis and experimental investigation on the mechanical behaviours of multifunctional sandwich structures embedded with batteries. Adv Compos Mater. 2021. DOI:https://doi.org/10.1080/09243046.2021.1917052 (article in press).
- Farah S, Anderson DG, Langer R. Physical and mechanical properties of PLA, and their functions in widespread applications — a comprehensive review. Adv Drug Deliv Rev. 2016;107:367–392.
- SD3D. PLA Technical Data Sheet, https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdf (cited 2020 Dec 30).
- Choi IR, Chung KS, Kim DH. Thermal and mechanical properties of high-strength structural steel HSA800 at elevated temperatures. Mater Des. 2014;63:544–551.
- Alharbi K, Ghadbeigi H, Efthymiadis P, et al. Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation. Modelling Simul Mater Sci Eng. 2015;23:085005.
- Fallahiarezoodar A, Peker R, Altan T. Temperature increase in forming of advanced high-strength steels effect of ram speed using a servodrive press. J Manuf Sci Eng. 2016;138:094503.
- Khan HA, Hassan A, Saeed MB, et al. Finite element analysis of mechanical properties of woven composites through a micromechanics model. Sci Eng Compos Mater. 2015;24:87–99.
- Joven R, Minaie B. Thermal properties of autoclave and out-of-autoclave carbon fiber-epoxy composites with different fiber weave configurations. J Compos Mater. 2018;52:4075–4085.
- Lim H, Battaile CC, Bishop JE, et al. Investigating mesh sensitivity and polycrystalline RVEs in crystal plasticity finite element simulations. Int J Plast. 2019;121:101–115.
- Nadolny K, Kaplonek W. Analysis of flatness deviations for austenitic stainless steel workpieces after efficient surface machining. Meas Sci Rev. 2014;14:204–212.
- Harland D, Alshaer AW, Brooks H. An experimental and numerical investigation of a novel 3D printed sandwich material for motorsport applications. Procedia Manuf. 2019;36:11–18.
- Lee Y, Tay AAO. Finite element thermal analysis of a solar photovoltaic module. Energy Procedia. 2012;15:413–420.