Effect of drilling-induced defects on progressive damage of open-hole composite laminates under compression

References

• Tojaga V, Skovsgaard SP, Jensen HM. Micromechanics of kink band formation in open-hole fibre composites under compressive loading. Compos B. 2018;149:66–73.
   Web of Science ®Google Scholar
• Saeed MU, Chen ZF, Chen ZH, et al. Compression behavior of laminated composites subjected to damage induced by low velocity impact and drilling. Compos B. 2014;56:815–820.
   Web of Science ®Google Scholar
• Haeger A, Grudenik M, Hoffmann MJ, et al. Effect of drilling-induced damage on the open hole flexural fatigue of carbon/epoxy composites. Compos Struct. 2019;215:238–248.
   Web of Science ®Google Scholar
• Moure MM, Herrero-Cuenca J, Garcia-Castillo SK, et al. Design tool to predict the open-hole failure strength of composite laminates subjected to in-plane loads. Compos Struct. 2020;238:111970.
   Web of Science ®Google Scholar
• Soutis C, Fleck NA, Smith PA. Failure prediction technique for compression loaded carbon fibre-epoxy laminate with open holes. J Compos Mater. 1991;25(11):1476–1498.
   Web of Science ®Google Scholar
• Geier N, Davim JP, Szalay T. Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review. Compos A. 2019;125:105552.
   Google Scholar
• Feito N, Lopez-Puente J, Santiuste C, et al. Numerical prediction of delamination in CFRP drilling. Compos Struct. 2014;108:677–683.
   Web of Science ®Google Scholar
• Haeger A, Schoen G, Lissek F, et al. Non-destructive detection of drilling-induced delamination in CFRP and its effect on mechanical properties. Proc Eng. 2016;149:130–142.
   Google Scholar
• Xu J, Li C, Mi S, et al. Study of drilling-induced defects for CFRP composites using new criteria. Compos Struct. 2018;201:1076–1087.
   Web of Science ®Google Scholar
• Phadnis VA, Makhdum F, Roy A, et al. Drilling in carbon/epoxy composites: experimental investigations and finite element implementation. Compos A. 2013;47:41–51.
   Google Scholar
• Davim JP, Rubio JC, Abrao AM. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Tech. 2007;67(9):1939–1945.
   Web of Science ®Google Scholar
• Khashaba UA. Drilling of polymer matrix composites: a review. J Compos Mater. 2012;47(15):1817–1832.
   Web of Science ®Google Scholar
• Suemasu H, Takahashi H, Ishikawa T. On failure mechanisms of composite laminates with an open hole subjected to compressive load. Compos Sci Tech. 2006;66(5):634–641.
   Web of Science ®Google Scholar
• Suemasu H, Naito Y, Gozu K, et al. Damage initiation and growth in composite laminates during open hole compression tests. Adv Compos Mater. 2012;21(3):209–220.
   Web of Science ®Google Scholar
• Xin L, Yang J, Wu L, et al. Mechanical simulation of open hole compressive behavior for high-modulus and high-strength composite laminates. Proceedings of 2017 8th International Conference on Mechanical and Aerospace Engineering; 2017 Jul 22- 25;Prague, Czech Republic: IEEE.
   Google Scholar
• Duan QF, Li SX, Song PH, et al. Effect of drilling-induced delamination on buckling behavior of open hole composite laminate specimens under compressive loading. Strength Mater. 2019;51(4):624–632.
   Web of Science ®Google Scholar
• Whitney JM, Nuismer RJ. Stress fracture criteria for laminated composites containing stress concentrations. J Compos Mater. 1974;8(3):253–265.
   Google Scholar
• Su ZC, Tay TE, Ridha M, et al. Progressive damage modeling of open-hole composite laminates under compression. Compos Struct. 2015;122:507–517.
   Web of Science ®Google Scholar
• Zhou S, Sun Y, Chen B, et al. Progressive damage simulation of open-hole composite laminates under compression based on different failure criteria. J Compos Mater. 2017;51(9):1239–1251.
   Web of Science ®Google Scholar
• Shimizu S, Sato M, Koyanagi J, et al. Numerical simulation of compressive failure of carbon-fiber-reinforced plastic laminates with various hole shapes. Adv Compos Mater. 2021;30(1):58–75.
   Web of Science ®Google Scholar
• Atas A. Open hole compressive strength and damage mechanisms: maximum stress versus Hashin criteria. Plast Rubber Compos. 2015;44(7):280–290.
   Web of Science ®Google Scholar
• Saleem M, Toubal L, Zitoune R, et al. Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes. Compos A. 2013;55:169–177.
   Google Scholar
• Karimi NZ, Heidary H, Minak G, et al. Effect of the drilling process on the compression behavior of glass/epoxy laminates. Compos Struct. 2013;98:59–68.
   Web of Science ®Google Scholar
• Karimi NZ, Heidary H, Fotouhi M, et al. Experimental analysis of GFRP laminates subjected to compression after drilling. Compos Struct. 2017;169:144–152.
   Web of Science ®Google Scholar
• Xu J, Huang X, Davim JP, et al. On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites. Polym Compos. 2020;41(9):3649–3663.
   Web of Science ®Google Scholar
• Xu J, Huang X, Chen M, et al. Drilling characteristics of carbon/epoxy and carbon/polyimide composites. Mater Manuf Process. 2020;35(15):1732–1740.
   Web of Science ®Google Scholar
• Xu J, Lin T, Chen M, et al. Machining processes of high-strength carbon/epoxy composites using diamond-coated brad spur drills. Mater Manuf Process. 2021;36(6):722–729.
   Web of Science ®Google Scholar
• Xu J, Lin T, Davim JP, et al. Wear behavior of special tools in the drilling of CFRP composite laminates. Wear. 2021;476:203738.
   Web of Science ®Google Scholar
• Wang Y, Burnett TL, Chai Y, et al. X-ray computed tomography study of kink bands in unidirectional composites. Compos Struct. 2017;160:917–924.
   Web of Science ®Google Scholar
• Garcea SC, Wang Y, Withers PJ. X-ray computed tomography of polymer composites. Compos Sci Tech. 2018;156:305–319.
   Web of Science ®Google Scholar
• Chen WC. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. Int J Mach Tools Manuf. 1997;37(8):1097–1108.
   Web of Science ®Google Scholar
• Geng D, Liu Y, Shao Z, et al. Delamination formation, evaluation and suppression during drilling of composite laminates: a review. Compos Struct. 2019;216:168–186.
   Web of Science ®Google Scholar
• Faraz A, Biermann D, Weinert K. Cutting edge rounding: an innovative tool wear criterion in drilling CFRP composite laminates. Int J Mach Tools Manuf. 2009;49(15):1185–1196.
   Web of Science ®Google Scholar
• Clarkson E Hexcel 8552 AS4 unidirectional prepreg qualification statistical analysis report. NCP-RP-2010-008 Rev D. 2011.
   Google Scholar
• Chamis CC Simplified composite micromechanics equations for strength, fracture toughness and environmental effects. NASA-TM-83696; 1984.
   Google Scholar
• Fedorov, A, Beichel, R, Kalpathy-Cramer, J et al 3D Slicer image as an image computing platform for the quantitative imaging network. Magn Reson Imaging. 2012;30(9):1323-1341.
   Google Scholar
• Turon A, Davila CG, Camanho PP, et al. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Eng Frac Mech. 2007;74(10):1665–1682.
   Web of Science ®Google Scholar
• Mekonnen AA, Woo K, Kang M, et al. Post-buckling and delamination propagation behavior of composite laminates with embedded delamination. J Mech Sci Tech. 2020;34:1099–1110.
   Web of Science ®Google Scholar
• Mekonnen AA, Woo K, Kang M, et al. Effects of size and location of initial delamination on post-buckling and delamination propagation behavior of laminated composites. Int J Aero Space Sci. 2020;21(1):80–94.
   Web of Science ®Google Scholar
• Hashin Z, Rotem A. A fatigue failure criterion for fiber reinforced materials. J Compos Mater. 1973;7(4):448–464.
   Web of Science ®Google Scholar
• Abaqus 6.14 documentation. dassault systems: providence, RI, USA; 2014.
   Google Scholar
• Heidari-Rarani M, Sayedain M. Finite element modeling strategies for 2D and 3D delamination propagation in composite DCB specimens using VCCT, CZM and XFEM approaches. Theor Appl Fract Mech. 2019;103:102246.
   Web of Science ®Google Scholar
• Cui X, Pham DC, Karuppiah A, et al. Defect characterization and evaluation of their effects on compressive failure of composite components. Proceedings of Thirty-fourth Technical Conference of the American Society for Composites (ASC 2019); 2019 Sept 23-25; Atlanta, GA.
   Google Scholar