Analytical prediction of the local Young’s modulus in CFRP laminate with ply discontinuity: a variational approach

References

• Yokozeki T, Aoki T. Stress analysis of symmetric laminates with obliquely-crossed matrix cracks. Adv Compos Mat. 2004;13(2):121–140.
   Web of Science ®Google Scholar
• Vinogradov V. A variational method for analysis of laminates with parallel arrays of intralaminar cracks. Inter J for Numerical Methods in Eng. 2019;120(5):666–705.
   Web of Science ®Google Scholar
• Higuchi R, Aoki R, Yokozeki T, et al. Evaluation of the in-situ damage and strength properties of thin-ply CFRP laminates by micro-scale finite element analysis. Adv Compos Mat. 2020;29(5):475–493.
   Web of Science ®Google Scholar
• Hajikazemi M, McCartney L, Van Paepegem W. Matrix cracking initiation, propagation and laminate failure in multiple plies of general symmetric composite laminates. Compos A. 2020;136:105963.
   Google Scholar
• Li X, Saeedifar M, Benedictus R, et al. Damage accumulation analysis of CFRP cross-ply laminates under different tensile loading rates. Compos C: Open Access. 2020;1:100005.
   Google Scholar
• Calvo J, Feito N, Miguelez M, et al. Modeling the delamination failure under compressive loads in CFRP laminates based on digital image correlation analysis. Compos Struct. 2022;287:115265.
   Web of Science ®Google Scholar
• Suthenthiraveerappa V, Gopalan V, Arumugam A, et al. Dynamic characterization of the thickness-tapered laminated plant fiber-reinforced polymer composite plates. Adv Compos Mat. 2019;28(2):163–191.
   Web of Science ®Google Scholar
• Liang W, Duan Z, Wang Z, et al. Experimental and numerical investigation on bolted joint in glass–fiber reinforced composites. Adv Compos Mat. 2015;24(sup1):161–173.
   Web of Science ®Google Scholar
• Rösch J, Pfeifer R, Seidlitz H, et al. Preform joints in embroidered fabrics – influence on the mechanical properties. Adv Compos Mat. 2021;30(2):176–191.
   Web of Science ®Google Scholar
• Fish J, Lee S. Delamination of tapered composite structures. Eng Fract Mech. 1989;34(1):43–54.
   Web of Science ®Google Scholar
• Botting A, Vizzini A, Lee S. Effect of ply-drop configuration on delamination strength of tapered composite structures. AIAA J. 1996;34:1650–1656.
   Google Scholar
• He K, Hoa S, Ganesan R. The study of tapered laminated composite structures: a review. Compos Sci & Tech. 2000;60(14):2643–2657.
   Web of Science ®Google Scholar
• Zhang B, Kawashita L, Jones M, et al. An experimental and numerical investigation into damage mechanisms in tapered laminates under tensile loading, Compos. A: App Sci & Manu. 2021;133:105862.
   Web of Science ®Google Scholar
• Fikry M, Vinogradov V, Ogihara S. Experimental observation and modeling of resin pocket cracking in unidirectional laminates with ply discontinuity. Compos Sci Tech. 2022;218:109175.
   Web of Science ®Google Scholar
• Gan K, Allegri G, Hallett S. A simplified layered beam approach for predicting ply drop delamination in thick composite laminates. Mat Design. 2016;108:570–580.
   Web of Science ®Google Scholar
• Soleymani M, Tahani M, Zamani P. On the influence of resin pocket area on the failure of tapered sandwich composites. Adv in Struct Eng. 2021;24(1):42–51.
   Web of Science ®Google Scholar
• Nakatani H, Nakaya K, Matsuba A, et al. Effect of prepreg cut on the mechanical properties in CFRP laminates. J of Solid Mech & Mat Eng. 2011;5(12):742–752.
   Google Scholar
• Nakatani H, Nakaya K, Matsuba A, et al.Damage behavior in unidirectional CFRP laminates with fiber discontinuity. Trans of JSME, Series A. 2013;79(799):294–303. Japanese.
   Google Scholar
• Nakatani H, Nagata Y, Kitamura R, et al. Damage behavior in CFRP laminates containing fiber discontinuities of different sizes. Trans of JSME. 2015;81(831):15–00226. Japanese.
   Google Scholar
• Nagata Y, Nakatani H, Matsuba A, et al. Effect of fiber discontinuity on mechanical properties of interlaminar-toughened CFRP laminates. Trans of JSME. 2015;81(825):14–00699. Japanese
   Google Scholar
• Koyanagi K, Kitamura R, Matsuba A, et al.Damage behavior evaluation of thermoplastic resin based CF/PA6 laminate composites with fiber discontinuity. J of the Society of Mat Sci. 2016;65(8):561–566. Japanese.
   Google Scholar
• Fikry M, Wang Q, Irita M, et al. Measurement of microscopic strain distributions of CFRP laminates with fiber discontinuities by sampling moiré method. Adv Compos Mat. 2022;31(3):273–288.
   Web of Science ®Google Scholar
• Yamazaki N, Fikry M, Vinogradov V, et al. Variational stress analysis of laminates with regions of different material properties in the loading direction. J of Japan Society of Compos Mat. 2022;48(2):52–62. Japanese.
   Google Scholar
• Hashin Z. Analysis of cracked laminates: a variational approach. Mech of Mat. 1985;4(2):121–136.
   Web of Science ®Google Scholar
• Li S, Hafeez F. Variation-based cracked laminate analysis revisited and fundamentally extended. Int J Solids Struct. 2009;46:3505–3515.
   Web of Science ®Google Scholar
• Vinogradov V, Hashin Z. Variational analysis of cracked angle-ply laminates. Compos Sci Technol. 2010;70:638–646.
   Web of Science ®Google Scholar
• Hajikazemi M, Sadr M. A variational model for stress analysis in cracked laminates with arbitrary symmetric lay-up under general in-plane loading. Int J Solids Struct. 2014;51(2):516–529.
   Web of Science ®Google Scholar
• Hajikazemi M, Sadr M, Hosseini-Toudeshky H, et al. Thermo-elastic constants of cracked symmetric laminates: a refined variational approach. Int J Mech Sci. 2014;89:47–57.
   Web of Science ®Google Scholar
• Fikry M, Ogihara S, Vinogradov V. The effect of matrix cracking on mechanical properties in FRP laminates. Mech Adv Mat Modern Processes. 2018;4(3):1–16.
   Google Scholar
• Fikry M, Ogihara S, Vinogradov V. Measurement of residual strains as a parameter of matrix cracking in CFRP laminates. J of Adv Mech Design, Sys Manufacturing. 2021;15(4):JAMDSM0040.
   Web of Science ®Google Scholar