Influence of flax fibers on network formation of DGEBA/DETA matrix

References

• Baley C, Bourmaud A. Average tensile properties of French elementary flax fibers. Mater Lett. 2014;122:159–161.
   Web of Science ®Google Scholar
• Lefeuvre A, Bourmaud A, Lebrun L, et al. A study of the yearly reproducibility of flax fiber tensile properties. Ind Crops Prod. 2013;50:400–407.
   Web of Science ®Google Scholar
• Lefeuvre A, Bourmaud A, Morvan C, et al. Tensile properties of elementary fibres of flax and glass: analysis of reproducibility and scattering. Mater Lett. 2014;130:289–291.
   Web of Science ®Google Scholar
• Pickering KL, Efendy MGA, Le TM. A review of recent developments in natural fibre composites and their mechanical performance. Compos Part Appl Sci Manuf. 2016;83:98–112.
   Web of Science ®Google Scholar
• Fuentes CA, Tran LQN, Dupont-Gillain C, et al. Wetting behaviour and surface properties of technical bamboo fibres. Colloids Surf Physicochem Eng Asp. 2011;380:89–99.
   Web of Science ®Google Scholar
• Tran LQN, Fuentes CA, Dupont-Gillain C, et al. Wetting analysis and surface characterisation of coir fibres used as reinforcement for composites. Colloids Surf Physicochem Eng Asp. 2011;377:251–260.
   Web of Science ®Google Scholar
• Kalita D, Netravali AN. Interfaces in green composites: a critical review. Rev Adhes Adhes. 2015;3:386–443.
   Web of Science ®Google Scholar
• Tran LQN, Yuan XW, Bhattacharyya D, et al. Fiber-matrix interfacial adhesion in natural fiber composites. Int J Mod Phys B. 2015;29:1540018.
   Web of Science ®Google Scholar
• Zhou Y, Fan M, Chen L. Interface and bonding mechanisms of plant fibre composites: an overview. Compos Part B Eng. 2016;101:31–45.
   Web of Science ®Google Scholar
• Drzal LT, Madhukar M. Fibre-matrix adhesion and its relationship to composite mechanical properties. J Mater Sci. 1993;28:569–610.
   Web of Science ®Google Scholar
• Faruk O, Bledzki AK, Fink H-P, et al. Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci. 2012;37:1552–1596.
   Web of Science ®Google Scholar
• Kabir MM, Wang H, Lau KT, et al. Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Compos Part B Eng. 2012;43:2883–2892.
   Web of Science ®Google Scholar
• Gopalakrishnan P, Saiah R, Gattin R, et al. Effect of mercerization of flax fibers on wheat flour/flax fiber biocomposite with respect to thermal and tensile properties. Compos Interfaces. 2008;15:759–770.
   Web of Science ®Google Scholar
• Balnois E, Busnel F, Baley C, et al. An AFM study of the effect of chemical treatments on the surface microstructure and adhesion properties of flax fibres. Compos Interfaces. 2007;14:715–731.
   Web of Science ®Google Scholar
• Pizzi A, Kueny R, Lecoanet F, et al. High resin content natural matrix–natural fibre biocomposites. Ind Crops Prod. 2009;30:235–240.
   Web of Science ®Google Scholar
• Gouanve F, Meyer M, Grenet J, et al. Unsaturated polyester resin (UPR) reinforced with flax fibers, untreated and cold He plasma-treated: thermal, mechanical and DMA studies. Compos Interfaces. 2006;13:355–364.
   Web of Science ®Google Scholar
• Drzal LT. The role of the fiber-matrix interphase on composite properties. Vacuum. 1990;41:1615–1618.
   Web of Science ®Google Scholar
• Nam TH, Ogihara S, Tung NH, et al. Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites. Compos Part B Eng. 2011;42:1648–1656.
   Web of Science ®Google Scholar
• Gomes A, Matsuo T, Goda K, et al. Development and effect of alkali treatment on tensile properties of curaua fiber green composites. Compos Part Appl Sci Manuf. 2007;38:1811–1820.
   Web of Science ®Google Scholar
• Riccardi CC, Adabbo HE, Williams RJJ. Curing reaction of epoxy resins with diamines. J Appl Polym Sci. 1984;29:2481–2492.
   Web of Science ®Google Scholar
• Jacob M, Joseph S, Pothan LA, et al. A study of advances in characterization of interfaces and fiber surfaces in lignocellulosic fiber-reinforced composites. Compos Interfaces. 2005;12:95–124.
   Web of Science ®Google Scholar
• Islam MdK SA, Sharif A. Nanocharacterization of interface between natural fiber and polymer matrix: an overview. Compos Interfaces. 2016;23:105–123.
   Web of Science ®Google Scholar
• Sottos NR. The influence of the fiber/matrix interface on local glass transition temperature. In: Noda I, Rubingh DN, editors. Studies in polymer science. [Internet]. Elsevier; 1992. p. 339–358. Available from: http://www.sciencedirect.com/science/article/pii/B9780444893970500221
   Google Scholar
• Aufray M, Roche AA. Is gold always chemically passive? Appl. Surf Sci. 2008;254:1936–1941.
   Google Scholar
• Aufray M, Roche AA. Properties of the interphase epoxy-amine/metal: influences from the nature of the amine and the metal. In: W. Possart, editor. Adhesion: current research and applications. Weinheim: Wiley-VCH. 2005; p. 89–102.
   Google Scholar
• Henriksson M, Fogelström L, Berglund LA, et al. Novel nanocomposite concept based on cross-linking of hyperbranched polymers in reactive cellulose nanopaper templates. Compos Sci Technol. 2011;71:13–17.
   Web of Science ®Google Scholar
• Ansari F, Galland S, Johansson M, et al. Cellulose nanofiber network for moisture stable, strong and ductile biocomposites and increased epoxy curing rate. Compos Part Appl Sci Manuf. 2014;63:35–44.
   Web of Science ®Google Scholar
• Wu L, Hoa SV, Ton-That M-T. Effects of water on the curing and properties of epoxy adhesive used for bonding FRP composite sheet to concrete. J Appl Polym Sci. 2004;92:2261–2268.
   Web of Science ®Google Scholar
• Choi S, Janisse AP, Liu C, et al. Effect of water addition on the cure kinetics of an epoxy-amine thermoset. J Polym Sci Part Polym Chem. 2011;49:4650–4659.
   Web of Science ®Google Scholar
• Placet V, Cisse O, Boubakar ML. Influence of environmental relative humidity on the tensile and rotational behaviour of hemp fibres. J Mater Sci. 2012;47:3435–3446.
   Web of Science ®Google Scholar
• Zhang D, Milanovic NR, Zhang Y, et al. Effects of humidity conditions at fabrication on the interfacial shear strength of flax/unsaturated polyester composites. Compos Part B Eng. 2014;60:186–192.
   Web of Science ®Google Scholar
• Alomayri T, Assaedi H, Shaikh FUA, et al. Effect of water absorption on the mechanical properties of cotton fabric-reinforced geopolymer composites. J Asian Ceram Soc. 2014;2:223–230.
   Google Scholar
• Baley C, Morvan C, Grohens Y. Influence of the absorbed water on the tensile strength of flax fibers. Macromol Symp. 2005;222:195–202.
   Google Scholar
• Stamboulis A, Baillie CA, Peijs T. Effects of environmental conditions on mechanical and physical properties of flax fibers. Compos Part Appl Sci Manuf. 2001;32:1105–1115.
   Web of Science ®Google Scholar
• Baley C, Le Duigou A, Bourmaud A, et al. Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites. Compos Part Appl Sci Manuf. 2012;43:1226–1233.
   Web of Science ®Google Scholar
• Kohler R, Dück R, Ausperger B, et al. A numeric model for the kinetics of water vapor sorption on cellulosic reinforcement fibers. Compos Interfaces. 2003;10:255–276.
   Web of Science ®Google Scholar
• Galy J, Sabra A, Pascault J-P. Characterization of epoxy thermosetting systems by differential scanning calorimetry. Polym Eng Sci. 1986;26:1514–1523.
   Web of Science ®Google Scholar
• Saklatvala RD, Saunders MH, Fitzpatrick S, et al. A comparison of high speed differential scanning calorimetry (Hyper-DSC) and modulated differential scanning calorimetry to detect the glass transition of polyvinylpyrrolidone: the effect of water content and detection sensitivity in powder mixtures (a model formulation). J Drug Deliv Sci Technol. 2005;15:257–260.
   Web of Science ®Google Scholar
• Mijovic J, Andjelic S. A study of reaction kinetics by near-infrared spectroscopy. 1. Comprehensive analysis of a model epoxy/amine system. Macromolecules. 1995;28:2787–2796.
   Web of Science ®Google Scholar
• Xu L, Fu JH, Schlup JR. In situ near-infrared spectroscopic investigation of the kinetics and mechanisms of reactions between Phenyl Glycidyl Ether (PGE) and multifunctional aromatic amines. Ind Eng Chem Res. 1996;35:963–972.
   Web of Science ®Google Scholar
• Guibe C, Time-temperature-transformation FJ. (TTT) cure diagrams: relationships betweenTg, cure temperature, and time for DGEBA/DETA systems. J Appl Polym Sci. 1996;62:1941–1951.
   Web of Science ®Google Scholar
• Santiago D, Fernández-Francos X, Ramis X, et al. Comparative curing kinetics and thermal–mechanical properties of DGEBA thermosets cured with a hyperbranched poly(ethyleneimine) and an aliphatic triamine. Thermochim Acta. 2011;526:9–21.
   Web of Science ®Google Scholar
• Willems W. Hydrostatic pressure and temperature dependence of wood moisture sorption isotherms. Wood Sci Technol. 2014;48:483–498.
   Web of Science ®Google Scholar
• Pascault JP, Sautereau H, Verdu J, et al. Thermosetting polymers. [Internet]. New York (NY): Marcel Dekker; 2002 [cited 2019 Feb 22]. Available from: https://trove.nla.gov.au/version/46611272
   Google Scholar
• Chen J, Nakamura T, Aoki K, et al. Curing of epoxy resin contaminated with water. J Appl Polym Sci. 2001;79:214–220.
   Web of Science ®Google Scholar
• Hartono A, da Silva EF, Grasdalen H, et al. Qualitative determination of species in DETA−H 2 O−CO 2 System Using 13 C NMR spectra. Ind Eng Chem Res. 2007;46:249–254.
   Web of Science ®Google Scholar
• González MG, Cabanelas JC, Baselga J Applications of FTIR on epoxy resins - identification, monitoring the curing process, phase separation and water uptake. In: Theophanides T, editor. Infrared Spectroscopy - Materials Science, Engineering and Technology. [Internet]. InTech; 2012 [cited 2019 Feb 6]. Available from: http://www.intechopen.com/books/infrared-spectroscopy-materials-science-engineering-and-technology/applications-of-ftir-on-epoxy-resins-identification-monitoring-the-curing-process-phase-separatio
   Google Scholar
• Hadjiivanov K, Kim Y, Kyoung K. Identification and characterization of surface hydroxyl groups by infrared spectroscopy. Adv Catal. [Internet]. Elsevier; 2014 [cited 2014 Apr 2];34:99–318. Available from: https://linkinghub.elsevier.com/retrieve/pii/B9780128001271000023
   Google Scholar
• Detwiler AT, Lesser AJ. Characterization of double network epoxies with tunable compositions. J Mater Sci. 2012;47:3493–3503.
   Web of Science ®Google Scholar