Experimental and numerical investigations on interface microstructure characteristics and wave formation mechanism of Sn/Cu explosive welded plates

References

• Zu Z, Chen D, Zhang X, et al. On the initial stages and growth process of intermetallic compounds at Cu/Sn interface: a MD simulation and experimental study. Comp Mater Sci. 2022;208:111349.
   Web of Science ®Google Scholar
• Ke JH, Gao Y, Kao CR, et al. Pattern formation during interfacial reaction in between liquid Sn and Cu substrates – a simulation study. Acta Mater. 2016;113:245–258.
   Web of Science ®Google Scholar
• Shen J, Agrawal P, Rodrigues TA, et al. Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy. Mater Design. 2022;223:111176.
   Web of Science ®Google Scholar
• Shen J, Goncalves R, Choi YT, et al. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal. Mater Sci Eng A. 2022;857:144025.
   Web of Science ®Google Scholar
• Shen J, Goncalves R, Choi YT, et al. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal. Scr Mater. 2023;22:115053.
   Google Scholar
• He H, Huang S, Ye Y, et al. Microstructure and mechanical properties of Cu joints soldered with a Sn-based composite solder, reinforced by metal foam. J Alloy Compd. 2020;845:156240.
   Web of Science ®Google Scholar
• Liu B, Tian Y, Wang C, et al. Extremely fast formation of Cu Sn intermetallic compounds in Cu/Sn/Cu system via a micro-resistance spot welding process. J Alloy Compd. 2016;687:667–673.
   Web of Science ®Google Scholar
• Dimitrovska A, Kovacevic R. Mitigation of Sn whisker growth by composite Ni/Sn plating. J Electron Mater. 2009;38(12):2516–2524.
   Web of Science ®Google Scholar
• Hanliang L, Ning L, Yanlong C, et al. Interface microstructure morphology and formation evolution mechanism of Al-1060/cu-T2 composites fabricated by explosive welding method. Compos Interface. 2022;29(5):465–485. DOI:10.1080/09276440.2021.1971883
   Web of Science ®Google Scholar
• Liang H, Chen Y, Luo N, et al. Phase constitution and texture distribution in the vortex zone of Co/Cu explosive welded plates. J Mater Res Technol. 2022;18:4228–4235.
   Google Scholar
• Liang H, Luo N, Shen T, et al. Experimental and numerical simulation study of Zr-based BMG/Al composites manufactured by underwater explosive welding. J Mater Res Technol. 2020;9(2):1539–1548.
   Google Scholar
• Mohammad-Reza KG, Ali K, Gholamreza K, et al. Effect of postweld heat treatment on interface microstructure and metallurgical properties of explosively welded bronze–carbon steel. J Cent South Univ. 2018;25:1849–1861.
   Web of Science ®Google Scholar
• Hanliang L, Ning L, Yanlong C, et al. Experimental and numerical simulation study of Fe-based amorphous foil/al-1060 composites fabricated by an underwater explosive welding method. Compos Interface. 2021;28:997–1013.
   Web of Science ®Google Scholar
• Safarali FS, Abbas S, Abolhassan N, et al. Investigating the effect of post weld heat treatment on corrosion properties of explosive bonded interface of AA5083/AA1050/SS321 tubes. Mater Res Express. 2020;7(3):036529.
   Web of Science ®Google Scholar
• Hanliang L, Ning L, Xiaojie L, et al. Joining of Zr60Ti17Cu12Ni11 bulk metallic glass and aluminum 1060 by underwater explosive welding method. J Manuf Process. 2019;45:115–122.
   Web of Science ®Google Scholar
• Liang H, Luo N, Chen Y, et al. Interface microstructure and phase constitution of AA1060/TA2/SS30408 trimetallic composites fabricated by explosive welding. J Mater Res Technol. 2022;18:564–576.
   Google Scholar
• Luo N, Liang H, Sun X, et al. Research on the interfacial microstructure of three-layered stainless steel/ti/low-carbon steel composite prepared by explosive welding. Compos Interface. 2021;28(6):609–624.
   Web of Science ®Google Scholar
• Findik F. Recent developments in explosive welding. Mater Design. 2011;32(3):1081–1093.
   Web of Science ®Google Scholar
• Bataev IA, Tanaka S, Zhou Q, et al. Towards better understanding of explosive welding by combination of numerical simulation and experimental study. Mater Design. 2019;169:107649.
   Web of Science ®Google Scholar
• Yang M, Xu J, Ma H, et al. Microstructure development during explosive welding of metal foil: morphologies, mechanical behaviors and mechanisms. Compos B Eng. 2021;212:108685.
   Web of Science ®Google Scholar
• Liu MB, Zhang ZL, Feng DL. A density-adaptive SPH method with kernel gradient correction for modeling explosive welding. Computational Mechanics. 2017;60(3):513–529.
   Web of Science ®Google Scholar
• Zhang ZL, Liu MB. Numerical studies on explosive welding with ANFO by using a density adaptive SPH method. J Manuf Process. 2019;41:208–220.
   Web of Science ®Google Scholar
• Shunchang H. Phase transformation and fractography of interface of explosive welding. Beijing: National Defense Industry Press; 2011.
   Google Scholar
• Zheng YM. The principle and application of explosive welding and metallic composite. Changsha: Central South University Press; 2007.
   Google Scholar
• Deribas AA, Kudinov VM, Matveenkov FI, et al. Determination of the impact parameters of flat plates in explosive welding. Combust Explo Shock Waves. 1967;3(2):182–186.
   Web of Science ®Google Scholar
• Deribas AA, Kudinov VM, Matveenkov FI. Effect of the initial parameters on the process of wave formation in explosive welding. Combust Explo Shock Waves. 1967;3(4):344–348.
   Web of Science ®Google Scholar
• Alshaer AW, Rogers BD, Li L. Smoothed Particle Hydrodynamics (SPH) modelling of transient heat transfer in pulsed laser ablation of Al and associated free-surface problems. Comput Mater Sci. 2017;127:161–179.
   Web of Science ®Google Scholar
• Wang X, Zheng Y, Liu H, et al. Numerical study of the mechanism of explosive/impact welding using Smoothed Particle Hydrodynamics method. Mater Design. 2012;35:210–219.
   Web of Science ®Google Scholar
• Satyanarayan TS, Mori A, Hokamoto K. Welding of Sn and Cu plates using controlled underwater shock wave. J Mater Process Tech. 2017;245:300–308.
   Web of Science ®Google Scholar
• Yang M, Xu J, Chen D, et al. Understanding interface evolution during explosive welding of silver foil and Q235 substrate through experimental observation coupled with simulation. Appl Surf Sci. 2021;566:150703.
   Web of Science ®Google Scholar
• Greenberg BA, Ivanov MA, Pushkin MS, et al. Formation of Intermetallic Compounds During Explosive Welding. Metall Mater Trans A. 2016;47(11):5461–5473. DOI:10.1007/s11661-016-3729-7
   Google Scholar
• Paul H, Miszczyk MM, Chulist R, et al. Microstructure and phase constitution in the bonding zone of explosively welded tantalum and stainless steel sheets. Mater Design. 2018;153:177–189.
   Web of Science ®Google Scholar
• Chulist R, Fronczek DM, Szulc Z, et al. Texture transformations near the bonding zones of the three-layer Al/Ti/Al explosively welded clads. Mater Charact. 2017;129:242–246.
   Web of Science ®Google Scholar
• Han J, Chen J, Peng L, et al. Microstructure, texture and mechanical properties of friction stir processed Mg-14gd alloys. Mater Design. 2017;130:90–102.
   Web of Science ®Google Scholar
• Wang Y. Research and practice of explosive welding of metal plates. Beijing: National Defence Industry Press; 2008.
   Google Scholar
• Xu J, Ma H, Yang M, et al. Experimental and numerical investigations on the microstructural features and mechanical properties of explosive welded niobium-steel interface. Mater Design. 2022;218:110716.
   Web of Science ®Google Scholar
• Mohammad-Reza J, Abdollah S, Gholamreza K, et al. Microstructural evolutions and its impact on the corrosion behaviour of explosively welded Al/Cu bimetal. Metals. 2020;10(5):634.
   Web of Science ®Google Scholar
• Sun Z, Shi C, Shi H, et al. Comparative study of energy distribution and interface morphology in parallel and double vertical explosive welding by numerical simulations and experiments. Mater Design. 2020;195:109027.
   Web of Science ®Google Scholar
• Sun Z, Shi C, Xu F, et al. Detonation process analysis and interface morphology distribution of double vertical explosive welding by SPH 2D/3D numerical simulation and experiment. Mater Design. 2020;191:108630.
   Web of Science ®Google Scholar