References
- Korobov , Yu.S. , et al. ., Advantages of activated arc metallising, Svarshchik , 2002 , 2 .
- Polyak , M.S. , The technology of hardening, in two volumes , Mashinostroenie , Moscow , 1995 .
- Korobov , Yu.S. and Boronenkov , V.N. , The kinetics of interaction of the sprayed metal with oxygen in electric arc metallising , Svar Proiz , 2003 , 7 , 30 – 36 .
- Korobov , Yu.S. , Improvement of the technology of electric advertising by modelling of the interaction of metal with the gases and the investigation of the properties of the coatings , PhD dissertation , Ekaterinburg , 2004 .
- Nikiforov , V.M. , The technology of metals and other structural materials , Mashinostroenie , Leningrad , 1986 .
- Matveishin , E.N. , The deposition of layers with high bonding strength by the methods of electric arc metallising , Avt Svarka , 2000 , 8 , 20 – 22 .
- Pokhmurskii , V.I. , et al. ., Flux-cored wires of the FeCrB + Al and FeCrB + Al + C system for electric arc metallising , Avt Svarka , 2002 , 3 , 32 – 35 .
- Panteleenko , F. , Self-fluxing diffusion-alloyed wires based on iron and protective coatings produced using these wires , Tekhnoprint , Minsk , 2001 .
- Panteleenko , F. , et al. ., Reconditioning of machine components, a handbook , Mashinostroenie , Leningrad , 2003 .
- Gubanov , et al. ., Diffusion-alloyed wire for thermal spraying , in: Materials, technologies and equipment for reconditioning and hardening machine components . Tekhnoprint , Minsk , 2003
- Ivashko , V.S. , et al. ., The reconditioning of friction components by activated arc metallising , Avt Svarka , 1999 , 4 , 47 – 49 .
- Korobov , Yu.S. , et al. ., The structure and properties of steel coatings, deposited by activated arc metallising , Svar Proiz , 1997 , 1 , 4 – 6 .
- Konstantinov , V.M. , The physical-chemical analysis of the alloying elements in protective coatings produced from diffusion-alloyed alloys , Vestnik PGU , 2003 , 4 , 23 .