Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC) – A review of the literature. Part 3 of 3: principles of controlled current short circuiting MIG/MAG systems

References

• Slania , J . 1996 . Determination of the conditions for stable transfer of metal from the electrode to the molten pool during MAG-welding with short circuiting and pulsating arcs . Weld Int , 10 : 849 – 852 .
   Google Scholar
• Baixo CEI. Study of the MIG/MAG welding by the hyperbaric dry technique [doctorate thesis (Engineering)]. [Florianópolis (SC)]: Federal University of Santa Catarina; 1999. p. 169.
   Google Scholar
• Hsu , C and Stava , E . 1999 . “ Wire extension measurement during short circuiting metal transfer ” . In Metal welding and applications , Proceedings of the Interdisciplinary Symposium. Met Soc 351 – 358 .
   Google Scholar
• Ogasawara , T . 1987 . A power source for gas shielded arc welding with new current waveforms . Weld J (Miami) , 66 ( 3 ) : 57 – 63 .
   Web of Science ®Google Scholar
• Orszagh , P . 1998 . Real time torch height detection technique for gas metal arc CO2 welding . Sci Technol Weld Join , 3 ( 3 ) : 139 – 143 .
   Web of Science ®Google Scholar
• Choi , SK . 1998 . Dynamic simulation of metal transfer in GMAW . Weld J (Miami) , 77 ( 1 ) : 38 – 51 .
   Google Scholar
• Choi , JH . 2001 . Simulation of dynamic behaviour in a GMAW system . Weld J (Miami) , 80 ( 10 ) : 239 – 245 .
   Google Scholar
• Ishchenko , YRS . 1993 . Characteristics of controlling droplet transfer in consumable electrode short circuit welding . Weld Int , 7 ( 11 ) : 895 – 897 .
   Google Scholar
• Poloskov , SI . 2001 . Control of droplet transfer in consumable electrode welding with short circuiting of the arcing gap . Weld Int , 15 : 873 – 875 .
   Google Scholar
• Silva RHG. Influence of the variables and parameters for short circuit MIG/MAG welding. Florianópolis. Internal Report; 2003. p. 27.
   Google Scholar
• Eassa , HE . 1983 . A high performance welding power source and its application . IEEE , : 1241 – 1244 .
   Google Scholar
• Kvasov , FV . 2000 . Special features of mechanised welding with controlled electrode metal transfer . Weld Int , 14 ( 2 ) : 158 – 161 .
   Google Scholar
• Lesnewich , A . 1958 . Control of melting rate and metal transfer in gas shielded metal arc welding part II – control of electrode melting rate . Weld Res Suppl , : 418 – 425 .
   Google Scholar
• Stenbakca , N and Persson , K . 1989 . Shielding gases for gas metal arc welding . Weld J (Miami) , 8 ( 11 ) : 41 – 47 .
   Google Scholar
• Aichele , G . 2002 . The contact tube distance in gas shielded metal arc welding – how does it work? . Weld Cutt (Düsseldorf) , : 80 – 83 .
   Google Scholar
• INFOMET. MIG MAG. Available from: www.infomet.com.br (http://www.infomet.com.br) . Accessed on 20//02/2003.
   Google Scholar
• Fortes , C . 2004 . Tubular Wires . ESAB , : 103
   Google Scholar
• Amin , M . 1981 . Synergic pulse MIG welding . Metal Constr , : 349 – 353 .
   Google Scholar
• Amin , M . 1983 . Pulse current parameters for arc stability and controlled metal transfer in arc welding . Metal Constr , : 272 – 278 .
   Google Scholar
• Vaidya , V . 2002 . Shielding gas mixtures for semiautomatic welds . Weld J (Miami) , 81 ( 9 ) : 43 – 48 .
   Web of Science ®Google Scholar
• Lucas , W . 1983 . Process stability in MIG welding . Weld Inst Res Bull , : 329 – 336 .
   Google Scholar
• Mita , T . 1988 . Quantitative estimates of arc stability for CO2 gas shielded arc welding . Weld Int , 2 : 152 – 159 .
   Google Scholar
• Den Ouden , G and Hermans , MJM . 1999 . Process behaviour and stability in short circuit gas metal arc welding . Weld J (Miami) , 78 ( 4 ) : 137 – 141 .
   Google Scholar
• Chae , YM . 1999 . A new instantaneous output current control method for inverter arc welding machine . IEEE , : 521 – 526 .
   Google Scholar
• Mori R, et al. Validation of the regularity methodology in short circuit metallic transfer. Florianópolis, Report. 2002. p. 13.
   Google Scholar
• Dutra J. Computerised procedure for determination and control of the variables in the welding MIG/MAG [doctorate thesis (Engineering)]. [Florianópolis (SC)]: Federal University of Santa Catarina; 1989. p. 151.
   Google Scholar
• Zhang , YM . 1998 . Double sided arc welding increases weld joint penetration . Weld J (Miami) , 77 ( 6 ) : 57 – 61 .
   Web of Science ®Google Scholar
• Kvasov , FV . 2000 . Special features of mechanised welding with controlled electrode metal transfer . Weld Int , 14 ( 2 ) : 158 – 161 .
   Google Scholar
• Power Wave® 455/STT® and Power Feed TM10 Dual. Lincoln Electric, Available from: www.lincolneletric.com. Accessed on 15/01/2004. p. 5.
   Google Scholar
• Welding's Wave of the Future. Lincoln Electric Knowledge Articles, Cleveland, Available from: www.lincolnelectric.com (http://www.lincolnelectric.com) . Accessed on 25/11/2003. p. 2.
   Google Scholar
• Deruntz , BD . 2003 . Assessing the Benefits of Surface Tension Transfer® Welding to Industry . J Industrial Technol , 19 ( 4 ) : 2 – 8 .
   Google Scholar
• Stava EK, et al. Das GMAW–STT-system: Ein Fortgeschrittenes Schweisystem für Wurzelrohrschwei en und Blechschweien. DVS, p. 71–79.
   Google Scholar
• Miller's new, software driven RMD process overcomes short circuit MIG limitations. Miller News Releases. Appletown, January 2004, Available from: www.millerwelds.com (http://www.millerwelds.com) . Accessed in March 2004.
   Google Scholar
• Stava , EK . 1993 . A New, low spatter arc welding machine . Weld J , : 25 – 29 .
   Google Scholar
• Stava , EK . 1999 . New surface transfer tension process speeds pipe welding . Pipe Line Gas Industry , 82 ( 9 ) : 55 – 57 .
   Google Scholar
• Maruyama , T . 1995 . Current waveform control in gas shielded arc welding for robotic systems . Kobelco Technol Rev , : 10 – 14 .
   Google Scholar
• Wohlfahrt , H . 2003 . Metal inert gas welding of magnesium alloys . Weld Cutt (Düsseldorf) , 55 ( 2 ) : 80 – 84 .
   Google Scholar
• Stava , EK . 2001 . Waveform control speeds root pass . Weld Des Fabr , : 39 – 42 .
   Google Scholar
• 1999 . Heat input control limits distortion and spatter . Weld Des Fabr , : 20 – 22 .
   Google Scholar
• Stava EK. Electric utility speeds heat exchanger repair with new welding technology. Cleveland: Lincoln Electric Knowledge Articles, Available from: www.lincolnelectric.com (http://www.lincolnelectric.com) . Accessed on 25/11/2003. p. 2.
   Google Scholar
• Schuz T. Ein Prozessfehler brachte die zuendende Idee. Berlin: TU Berlin Media information; n. 199, Available from: www.tu-berlin.de (http://www.tu-berlin.de) . Accessed on 25/11/2004.
   Google Scholar
• The Autoweld System. Technical Report. Cleveland; 1999. p. 6.
   Google Scholar
• Wall K. Honda improves productivity with STT welding process. Cleveland: Lincoln Electric Knowledge Articles, Available from: www.lincolnlectric.com (http://www.lincolnlectric.com) . Accessed on 25/11/2003. p. 4.
   Google Scholar
• Gohr R Jr. New methods of control of MIG/MAG welding [doctorate thesis (Engineering)]. [Florianópolis (SC)]: Federal University of Santa Catarina; 2002. p. 138.
   Google Scholar