References
- Moreira EV, Simões HR, Fritz MC, Rabello JM, Camargo J. Flat-panel detectors are accepted for digital radiography in place of conventional radiography in pipeline weld inspection. IV Pan-American Conference of END; Buenos Aires, October 2007
- Rabello JM, Campinho HS, Igushi ET, Moreira EV, Camargo JR. Use of computerised radiography techniques in inspecting welds by using the double wall – simple view technique. IV Pan-American Conference on Non Destructive Testing; Buenos Aires, October 2007
- Ewert U, Zscherpel U, Bavendiek K. Strategies for film replacement in radiography – a comparative study. IV Pan-American Conference on Non Destructive Testing; Buenos Aires, October 2007
- Mango S. How to evaluate the radiographic performance and long-term stability of a computed radiography system. IV Pan-American Conference on Non Destructive Testing; Buenos Aires, October 2007
- Diamond A. Stationary & portable use of a-Si Flat panels in NDT industries. http://www.ndt.net the NDT Database & Journal, ISSN: 1435-4934, ECNDT November 2006
- American Society for Testing and Materials, ASTM and 1815. Classification of film systems for industrial Radiography, 2006. p. 6
- Deutsche Institute for Normalization, DIN 54109. Non-Destructive testing – Image quality of radiographs. Image quality classes for iron material; 1989. p. 8
- Roza J. Development of high resistance pipes with a thickness of 19.05 mm. 61st Annual Congress of the ABM; Rio de Janeiro, July 2006
- Rocha J. Micro detectors for silicon based on scintillators for digital radiography. University of the Minho, Guimarães, Portugal, 2003
- Andreucci , R . 2003 . Industrial radiology , 6th Edition
- Bavendiek , K . 2005 . Flat panel detector – calibration for a high SNR , Berlin : BAM .
- American Society for Testing and Materials, ASTM A-751. Standard test methods, practices, and terminology for chemical analysis of steel products, 2001. p. 5
- European Standard, EN 12543. Non destructive testing – characteristics of focal spots in industrial X-ray systems for use in non destructive testing – Part 1 Scanning method 1999. p. 12
- British Standard, BS EN-462-5. Non-destructive testing – Image quality of radiographs Part 5 Image quality indicators (duplex wire type), determination of image and sharpness value, 1996. p. 10