Analysis of microstructure and wear strength of hard facing used by the sugar and alcohol industry

References

• Jornalcana [cited 2008 May 25]. Available from: www.jornalcana.com.br
   Google Scholar
• Santos , AS , Franco , AA , Almeida , DM and Perticarrari , M . 2005 . Welding in the sugar and alcohol industry . Weld Magazine , I ( 7 ) : 20 – 26 .
   Google Scholar
• Fiore , NF , Kosel , TH and Fulcher , JK . 1983 . The effect of carbide volume fraction on the low abrasion resistance of high Cr–Mo white cast irons . Wear , : 313 – 325 .
   Google Scholar
• Hernández OJS. Optimisation of the consumable in cladding welding used in the sugar and alcohol industry [masters dissertation]. [São Carlos (SP)]: Federal University of São Carlos; 1997, 102 p
   Google Scholar
• Martins Filho AS. Welding claddings with tubular wire [masters dissertation]. [São Carlos (SP)]: Federal University of São Carlos; 1995, 93 p
   Google Scholar
• Paranhos RPR, Mello RST, Payão Filho JC. Influence of the welding parameters with submerged arc employing alloy flow and c steel wire on the cladding characteristics of Fe–Cr–C alloys resistant to abrasive wear. XXIV National Welding Technology Conference, XI Latin American Congress and V Spanish American Welding Congress; 1998 Sep; Fortaleza, Ceara State
   Google Scholar
• Sevilla , LML , Pineda , JCG and Toro , A . 2004 . The micro structural wear resistance relationship of claddings rich in chrome and tungsten applied by electric welding (SMAW) . Dyna , 71 ( 144 ) : 165 – 171 .
   Google Scholar
• Buchely , MF , Gutierrez , JC , León , LME and Toro , A . 2005 . The effect of micro structure on abrasive wear of hard facing alloys . Tribol Int , 259 : 52 – 61 .
   Google Scholar
• Lima , AC and Ferraresi , VA . 2006 July/Sep . A study of the metal transfer modes of a self shielded tubular wire with variations in the contact tip work piece distance . Weld Insp , 11 ( 3 )
   Google Scholar
• ASTM . 1991 . Standard test method for measuring abrasion using the dry sand/rubber wheel apparatus . ASTM G65-91 , : 231 – 243 .
   Google Scholar
• Carceller RC. Influence of the parameters of the welding regime on the morphology of steel and white cast chrome deposits and their increase in resistance to abrasive wear. José Antonio Echeverría Higher Polytechnic Institute, Faculty of Mechanical Engineering, Republic of Cuba, Doctorate Thesis in Technical Sciences, 2007. 154 p
   Google Scholar
• Zum Ghar , KH . 1987 . “ Micro structure and wear of materials ” . In Tribol Series , Vol. 10 , 560 Amsterdam : Elsevier Science Publishers .
   Google Scholar
• Mummery L. Surface texture analysis: the handbook. Hommelwerke GmbH, 1992. 106 p
   Google Scholar
• Berns , H and Fischer , A . 1997 Aug . Micro structure of Fe–Cr–C hard facing alloys with additions of Nb, Ti and B . Mater Characterization , 39 ( 77 ) : 499 – 527 .
   Google Scholar
• Polido RS, Gallego J. A study of the micro structure of hard cladding applied to equipment in the sugar and alcohol industry subject to abrasive wear [cited 2007 Sep 21]. Available from: www.dem.feis.unesp.br/maprotec 2006
   Google Scholar
• Hutchings , IM . 1992 . Tribology: friction and wear of engineering materials , 273 Boca Raton, FL : CRC Press Inc. .
   Google Scholar
• Corrêa EO, Alcântara NG, Tecco DG, Kummar RV. Evaluation of the wear resistance of Fe–Cr–C–Nb–V alloys developed for a hard weld cladding for use during highly abrasive conditions. The 8th Spanish American Congress of Mechanical Engineering – CIBIM; 2007 Oct; Cusco, Peru
   Google Scholar
• Wang , XH , Zou , ZD , Qu , SY and Song , SL . 2004 Nov . Micro structure and wear properties of Fe-band hard facing coating reinforced by TiC particles . J Mater Process Technol , : 3 – 6 .
   Google Scholar
• Atamert , S and Bhadeshia , HKDH . 1988 . Micro structure and stability of Fe–Cr–C hard facing alloys . Mater Sci Eng , 71 ( 130 ) : 101 – 111 .
   Google Scholar