References
- Praca zbiorowa pod red. J. Pilarczyka: Poradnik inz˙yniera. Spawalnictwo. Tom 2.Warszawa: WNT; 2005.
- DobajE. Maszyny i urządzenia spawalnicze. Warszawa: WNT; 2006.
- SoderstromEJ, MendezPF. Metal transfer during GMAW with thin electrodes and Ar-CO2 shielding gas mixtures. Weld J. 2008 (5)
- PiresI, QuintinoL, MirandaRM. Analysis of the influence of shielding gas mixtures on the gas metal arc welding metal transfer modes and fume formation rate. Mater Des. 2007 (5)
- Choosing shielding gases for gas metal arc welding. Weld J. 2008 (5)
- NorrishJ, RichardsonIF. Metal transfer mechanisms. Weld Metal Fabrication. 1988 (1)
- LiuS, SiewertTA. Metal transfer in gas metal arc welding: droplet rate. Weld J. 1989 (2)
- EagarTW, KimS-Y. Analysis of metal transfer in metal arc welding. Weld J. 1993 (6)
- Kannatey-AsibuE, RheeS. Observation of metal transfer during gas metal arc welding. Weld J. 1992 (10)
- LancasterJF. The physics of welding. Oxford: International Institute of Welding, Pergamon Press; 1986.
- WaszinkJH, GraatLHJ. Experimental investigation of the forces acting on a drop of weld metal. Weld J. 1983 (4)
- WangG, HuangPG, ZhangYM. Numerical analysis of metal transfer in gas metal arc welding. Metall Mater Trans B. 2003; Czerwiec34B.
- HuJ, TsaiLH. Effects of current on droplet generation and arc plasma in gas metal arc welding. J Appl Phys. 100 nr artykulu 053304.
- CraigEF. Pulsed spray welding – a mode of weld metal transfer that should revolutionize the GMAW process. Weld J. 1983 (11)
- PN-EN ISO 15609-1:2007. Specyfikacja i kwalifikowanie technologii spawania metali – Instrukcja technologiczna spawania – Część 1: Spawanie łukowe.
- PN-EN ISO 15614-1:2008. Specyfikacja i kwalifikowanie technologii spawania metali – Badanie technologii spawania – Część 1: Spawanie łukowe i gazowe stali oraz spawanie fukowe niklu i stopów niklu.
- NiagajJ, PilarczykA, et al, Badanie wpływu metod oraz warunków cieplnych spawania stali duplex na własności eksploatacyjne zła˛czy spawanych. Sprawozdanie z pracy badawczej nr Da-105 (ST-267/09). Gliwice: Instytut Spawalnictwa; 2009.
- PierożekB, LassocińskiJ. Spawanie łukowe stali w osłonach gazowych. Warszawa: WNT; 1987.
- KlimpelA. Technologia spawania i ciecia metali. Gliwice: Wydawnictwo Politechniki Śla˛jskiej; 1997.
- PN-EN ISO 14341. Materiały dodatkowe do spawania – Druty elektrodowe i stopiwo do spawania łukowego elektroda˛ metalowa˛ w osłonie gazu stali niestopowych i drobnoziarnistych – Klasyfikacja.