REFERENCES
- Eurocode 3: Design of steel structures – General rules, 1993-I-1.
- Hobbacher A, “recommendations on fatigue of welded components”, IIW Document XIII-1539-95/XV-845-95, 1995; 1995.
- British Standard Published Document, code of practice for fatigue design and assessment of steel structures, BS 7608, 1993.
- RadajD, SonsinoCM, FrickeW. “Fatigue assessment of welded joints by local approaches”. 2nd ed.Cambridge: Woodhead Publishing and Boca Roton (FL): CRC Press; 2006.
- ZerbstU, SchödelM, WebsterS, AinsworthR. “Fitness-for-Service fracture assessment of structures containing cracks”, A workbook based on the European SINTAP/FITNET procedure. Elsevier; 2007.
- LazzarinP, TovoR. A notch intensity approach to the stress analysis of welds. Fatigue Fract Eng Mater Struct.1998;21:1089–1104.
- LazzarinP, ZambardiR. A finite-volume-energy based approach to predict the static and fatigue behaviour of components with sharp V-shaped notches. Int J Fract.2001;112:275–298.
- LivieriP, LazzarinP. Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. Int J Fract.2005;133:247–376.
- LivieriP, TovoR. An implicit gradient application to fatigue of sharp notches and weldments. Eng Fract Mech.2007;74:515–526.
- LivieriP, TovoR. The use of the JV parameter in welded joints: stress analysis and fatigue assessment. Int J Fatigue. 2009;31:1124–1136.
- ZhangYH, MaddoxSJ. Fatigue life prediction for toe ground welded joints. Int J Fatigue. 2009;31:1124–1136.
- LeeMMK, BownessD. Estimation of stress intensity factor solution for weld toe cracks, in offshore tubular joints. Int J Fatigue. 2002;24:861–875.
- WilliamsML. Stress singularities resulting from various boundary conditions in angular corners of plates in extension. ASME J Appl Mech.1952;19:526–528.
- TovoR, LivieriP. An implicit gradient application to fatigue and complex structures. Eng Fract Mech.2008;75(7):1804–1814.
- TovoR, LivieriP. Previsione della resistenza a fatica di giunzioni saldate di piccolo spessore con il metodo del gradient implicito. Rivista Italiana della Saldatura. No. 6, November–December2009 :749–756.
- TanakaK. Engineering formulae for fatigue strength reduction due to crack-like notches. Int J Fract.1983;22:R39–R46.
- LazzarinP, TovoR, MeneghettiG. Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity. Int J Fatigue. 1997;19:647–665.
- LazzarinP, TovoR. Fatigue limit evaluation of notches, small cracks and defects: an engineering approach. Fatigue Fracture Eng Mater Struct.2004;27:1037–1049.
- TaylorD. Geometric effects in fatigue: a unifying theoretical model. Int J Fatigue. 1999;21:413–420.
- CapettaS, TovoR, TaylorD, LivieriP. Numerical evaluation of fatigue strength on mechanical notched components under multiaxial loadings. Int J Fatigue. 2011;33:661–671.
- CristofioriA, LivieriP, TovoR. An application of the Implicit Gradient Method to welded structures under multiaxial fatigue loadings. Int J Fatigue. 2009;31(1):12–19 [22].
- TovoR, LivieriP. A numerical approach to fatigue assessment of spot weld joints. Fatigue Fracture Eng Mater Struct.2011;34(1):32–45.
- SørensenJD, TychsenJ, AndersenJU, BrandstrupRD. Fatigue analysis of load-carrying filet welds. J Offshore Mech Arctic Eng.2006;128:65–74.
- TakenaBK, Shimoka WaH, ItohF, MikiC. Fatigue strengths of diaphragm joints in box-section truss chords of high strength steel. Proc. of JSCE. 1986;374(I-6):109–118.
- ParkW, MikiC. Fatigue assessment of large-size welded joints based on the effective notch stress approach. Int J Fatigue. 2008;30:1556–1568.
- NewmanJA, DowlingNE. A crack growth approach to life prediction of spot-welded lap joints. Fatigue & Fract Eng Mater Struct.1998;21:1123–1132.
- PeerlingsRHJ, de BorstR, BrekelmansWAM, de VreeJHP. Gradient enhanced damage for quasi-brittle material. Int J Num Meth Eng.1996;39:3391–3403.
- ElHaddadMH, TopperTH, SmithKN. Fatigue crack propagation of short cracks. ASME, J Eng Mater Technol.1979;101:42–45.