References
- Madali F, Shamanian M, Ashrafizadeh F. Effect of pulse current on microstructure and wear resistance of Stellite6/tungsten carbide claddings produced by tungsten inert gas process. Surf Coat Tech. 2011.
- TsangKH, SungHL. Evaluation study on angular distortion and residual stress of stainless steel pulsed TIG weldments. Adv Mater Res. 2011:291–294.
- KumarTS, BalasubramanianV, SanavullahMY. Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy. Mater Design. 2007;28.
- CunhaTV. Development of equipment and parameterisation methodology for TIG welding [master's dissertation]. Florianópolis: Department of Mechanical Engineering, Federal University of Santa Catarina; 2008.
- BalasubramanianV, RavisankarV. Effect of pulsed current welding on mechanical properties of high strength aluminum alloy. Int J Adv Manuf Technol. 2008.
- StreetJA. Pulsed arc welding. 1st ed. [S.l.]. Abington publishing; 1990.
- AWS. Welding handbook. 8th Ed. [S.l.]2. AWS; 1991.
- TsengKH, ChouCP. Effect of pulsed gas tungsten arc welding on angular distortion in austenitic stainless steel weldments. Sci Technol Weld Joi. 2001;6.
- TsengKH, ChouCP. The effect of pulsed GTA welding on the residual stress of a stainless steel weldment. J Mater Process Tech. 2002;123.
- SimpsonRP. Controlled weld-pool solidification structure and resultant properties with yttrium inoculation of Ti–6Al–6V–2Sn welds. Weld J. 1977;56(3)
- LeitnerRE, McelhinneyGH, PruittEL. An investigation of pulsed GTA welding variables. Weld J. 1973;52(9)
- BalasubramanianM, JayabalanV, BalasubramanianV. Developing mathematical models to predict tensile properties of pulsed current gas tungsten arc welded Ti-6Al-4V alloy. Mater Design. 2008.
- SureshMV, et al. Effect of pulse frequency in gas tungsten arc welding of powder metallurgical preforms. Sci Tech Weld Joi. 2004;9(4)
- WuCS, ZhengW, WuL. Modelling the transient behaviour of pulsed current tungsten-inert-gas weldpools. Modelling Simul. Mater. Sci. Eng. 1998;7.
- JanakiRGD, MitraTK, ShankarV. Microstructural refinement through inoculation of Type 7020 Al–Zn–Mg alloy welds and its effect on hot cracking and tensile property. J Mater Process Technol. 2003;142.
- BabuNK, RamanGSS. Influence of current pulsing on microstructure and mechanical properties of Ti–6Al–4V TIG weldments. Sci Tech Weld Joi. 2006;11(4)
- GuimarãesAS, Almeida NetoJCP. Effects of pulse parameters on weld bead geometry in welding thin AISI 304 stainless steel plates using pulsed TIG process. Soldagem & Inspeção. 1998;6.
- GonzalezAR, CassinaJC, MachadoIG. Factorial techniques in evaluation of the influence of pulse parameters on bead geometry in TIG welding with pulsed current. Caxias do Sul: XXI ENTS; 1995.
- GonzalezAR, CassinaJC, MachadoIG. Conventional and pulsed TIG: effect of current and welding speed on the weld bead geometry on ASI 304 steel. XX ENTS; 1994.
- JorgeJCF, et al., Study of variation of welding parameters of the pulsed TIG welding process on weld bead characteristics; Guarujá: XIII ENTS. 1987.
- TraidiaA, RogerF, GuyotE. Optimal parameters for pulsed gas tungsten arc welding in partially and fully penetraded weld pools. Int J Therm Sci. 2010;49.
- LothongkumG, ViyanitE, BhandhubanyoungP. Study on the effects of pulsed TIG welding parameters on delta-ferrite content, shape factor and bead quality in orbital welding of AISI 316L stainless steel plate. J Mater Process Tech. 2001;110.
- AeshAM. Optimization of weld bead dimensions in GTAW of aluminum-magnesium alloy. Mater Manuf Process. 2001;6(5)