References
- HuthHans-Jörg. Fatigue design of hydraulic turbine runners. Trondheim: Tese (Doutorado) – Department of Engineering Design and Materials, Norwegian University of Science and Technology; 2005. p. 178.
- BilmesPD, SolariM, LlorenteCL. Characteristics and effects of austenite resulting from tempering of 13Cr – NiMo martensitic steel weld metals. Mater Charact. 2001;46:285–296.
- FolkhardE. Welding metallurgy of stainless steels. Wien New York: Springer; 1988.
- AkhtarA, BrodieNW. Field welding large turbine runners. Water Power Dam Construct. 1979. 40–46.
- PereiraSA. Development of the repair procedure by welding martensitic stainless steels with similar filler metal, without TTP [Master's thesis]. Florianópolis, Santa Catarina, Brazil: Graduate Program in Mechanical Engineering, Federal University of Santa Catarina; 2000.
- PradoEM. Influence of the variables of the conventional MIG/MAG and Pulsed MIG processes on the mechanical properties of joints welded with wire ER410NiMo [Master's thesis]. Curitiba, Paraná, Brazil: Graduate Program in Mechanical Engineering, Federal University of Paraná.
- ASTM E 23-99. American Standard for Testing and Materials, ASTM: Standard Methods for Notched Bar Impact Testing of Metallic Materials, for Type A Charpy (simple beam) Impact Specimen.
- AWS D1.1/D1.1M:2004. An American National Standard Structural Welding Code-Steel.
- ASTM E647-95a. American Standard for Testing and Materials, ASTM: Standard test method for measurement of fatigue crack growth rates.
- ASTM E384-99. American Standard for Testing and Materials, ASTM: Standard test method for microindentation hardness of materials.
- Carrouge D. Phase transformations in the heat-affected zone of low carbon 13%Cr stainless steels, Tese (Doutorado), Materials Science and Metallurgy Department, Cambridge University; 2002. p. 185.
- WoollinP, CarrougeD. Heat affected zone microstructures in supermartensitic stainless steels. Conference on Super martensitic Stainless Steels, Bruxelas, Bélgica, 3 a 4 de outubro de; 2002.
- ThibaultD, BocherP, ThomasM. Residual stress and microstructure in welds of 13%Cr 4%Ni martensitic stainless steel. J Mater Process Technol. 2009;209:2195–2202.
- WangP, LuSP, XiaoNM, LiDZ, LiYY. Effect of delta ferrite on impact properties of low carbon 13Cr–4Ni martensitic stainless steel. Mater Sci Eng A. 2010;527:3210–3216.
- PukasiewiczAGM, HenkeSL, CasasWJP. Influence of the post-welding heat treatment on fatigue crack propagation on welded joints of soft martensitic stainless steel CA6NM. Soldagem Inspeção. 2005;10(3):109–116.
- RhoSB, HongHU, NamSW. The effect of (ferrite on fatigue cracks in 304L steels. Int J Fatigue. 2000;22:683–690.
- Sánchez-CabreraVM, et al. Effect of preheating temperature and filler metal type on the microstructure, fracture toughness and fatigue crack growth of stainless steel welded joints. Mater Sci Eng A. 2007;452–453: 235–243.