Minimization of defects in nickel-based superalloy weld overlay deposited by the GTAW cold wire feed process

References

• Perepezko JH. The hotter the engine, the better. Science. 2009;326:1068–1069.
   PubMed Web of Science ®Google Scholar
• Lu K. The future of metals. Science. 2010;328:319–320.10.1126/science.1185866
   PubMed Web of Science ®Google Scholar
• Silva CC, Afonso CRM, Ramirez AJ, et al. Aspectos metalúrgicos de revestimentos dissimilares com a superliga à base de níquel Inconel 625. Soldagem & Inspeção. 2012;17:251–263.
   Web of Science ®Google Scholar
• Hodge FG. The history of solid-solution-strengthened Ni alloys for aqueous corrosion service. JOM. 2006;58:28–31.10.1007/s11837-006-0078-9
   Web of Science ®Google Scholar
• Silva, CC, Miranda EC, Miranda HC, et al. Dilution control of weld overlay superalloys using Taguchi method. In: 31st International Conference on Ocean, Offshore and Artic Engineering – OMAE2012, 2012, Rio de Janeiro. Proceedings of 31st International Conference on Ocean, Offshore and Artic Engineering – OMAE2012. New York, NY: American Society of Mechanical Engineers ASME, 2012.
   Google Scholar
• Palani PK, Murugan N, Karthikeyan B. Process parameter selection for optimizing weld bead geometry in stainless steel cladding using Taguchi’s approach. Mater. Sci. Technol. 2006;22:1193–1200.10.1179/174328406X118294
   Web of Science ®Google Scholar
• Siva K, Murugan N, Logesh R. Optimization of weld bead geometry in plasma transferred arc hardfaced austenitic stainless steel plates using genetic algorithm. Int. J. Adv. Manuf. Technol. 2008.
   Web of Science ®Google Scholar
• Tu S-Y, Jean M-D, Wang J-T, et al. A robust design in hardfacing using a plasma transfer arc. Int. J. Adv. Manuf. Technol. 2006;27:889–896.10.1007/s00170-004-2265-6
   Web of Science ®Google Scholar
• Palani PK, Murugan N. Optimization of weld bead geometry for stainless steel claddings deposited by FCAW. J. Mater. Process. Technol. 2007;190:291–299.10.1016/j.jmatprotec.2007.02.035
   Web of Science ®Google Scholar
• Lv SX, Xu ZW, Wang HT, et al. Investigation on TIG cladding of copper alloy on steel plate. Sci. Technol. Weld. Joining. 2008;13:10–16.10.1179/174329307X249414
   Web of Science ®Google Scholar
• Benyounis KY, Olabi AG. Optimization of different welding process using statistical and numerical approaches – a reference guide. Adv. Eng. Softw. 2008;39:483–496.10.1016/j.advengsoft.2007.03.012
   Web of Science ®Google Scholar
• Ghani JA, Choudhury IA, Hassan HH. Application of Taguchi method in the optimization of end milling parameters. J. Mater. Process. Technol. 2004;145:84–92.10.1016/S0924-0136(03)00865-3
   Web of Science ®Google Scholar
• Juang SC, Tarng YS. Process parameters selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel. J. Mater. Process. Technol. 2002;122:33–37.10.1016/S0924-0136(02)00021-3
   Web of Science ®Google Scholar
• Silva CC Miranda EC, Miranda HC, et al. Um estudo sobre a contribuição da corrente e da velocidade de soldagem sobre a diluição e as características geométricas de cordões de solda depositados pelo processo TIG com alimentação de arame frio. Soldagem & Inspeção [Submetido para publicação]. 2010.
   Google Scholar
• Miranda EC, Silva CC, Miranda HC, et al. Influência do tecimento no nível de diluição e na geometria do cordão de solda utilizando o processo de soldagem TIG com alimentação automática de arame frio. In: Anais do XXXVI Congresso Brasileiro de Soldagem, Recife, Brasil; 2010.
   Google Scholar
• Banovic SW, DuPont JN, Marder AR. Dilution control in gas-tungsten-arc welds involving superaustenitic stainless steels and nickel-based alloys. Metall. Mater. Trans. B. 2001;32:1171–1176.10.1007/s11663-001-0104-9
   Web of Science ®Google Scholar
• Silva CC, Miranda EC, Motta MF, et al. Influence of arc length on dilution and weld bead geometry of Ni-based alloy using GTAW process with cold wire feed. In: Proceedings of 20th International Congress of Mechanical Engineering, Gramado, Brasil; 2009.
   Google Scholar
• Miranda EC, Silva CC, Miranda HC, et al. Ajuste dos parâmetros de alimentação de arame na soldagem com processo TIG para aplicações de revestimento. In: Anais do XXXV Congresso Brasileiro de Soldagem, Piracicaba, Brasil; 2009.
   Google Scholar
• Phadke MS. Quality engineering using robust design. New York (NY): Prentice Hall; 1989.
   Google Scholar
• Menzel M. The influence of individual components of an industrial gas mixture on the welding process and the properties of welded joints. Weld. Int. 2003;17:262–264.10.1533/wint.2003.3111
   Google Scholar
• Lindström J, Runnerstam O. Adding NO to the Argon or Argon/Helium mixture does the trick. Svetaren. 2000;2:14–16.
   Google Scholar