References
- Lukin VI, et al. New science intensive technologies. Moscow: AN NII ENTsITEKh; 1996. p. 5.
- Redchits VV, et al. Porosity in welding of nonferrous metals. Moscow. Tekhnologia Mashinostroeniya. 2002.
- Shalin RE, et al. Design and fabrication of large structures of aluminium/lithium alloys for aerospace technology. Weld. Int. 1977;5:387–392.
- Oglodkov MS, et al. Effect of thermomechanical treatment on the properties and structure of the alloy of the Al–Cu–Mg–Li–Zn system. Aviatsionnye materialy i tekhnologii. 2010;4:15–19.
- Antipov VV, et al. Aluminium deformable alloys. Aviatsionnye materialy i tekhnologii. 2012;5:167–182.
- Fridlyander IN, et al. Aluminium–lithium alloys. Structure and properties. Kiev: Naukova dumka; 1992.
- Klochkova YY, et al. Introduction into industrial production of semifinished products produced from advanced aluminium–lithium alloy V-1469. Aviatsionnye materialy i tekhnologii. 2011;1:8–12.
- Kablov EN. Strategic directions of the development of materials and processing technologies for the period up to 2030. Aviatsionnye materialy i tekhnologii. 2012; 7–17.
- Kablov EN, Lukin VI. Advanced aluminium alloys and technologies for welding them for aerospace technology components. In: Second International conference and exhibition Aluminium-21/Welding and brazing, Proceedings; 2012.
- Kablov EN, et al. Special features and prospects for welding aluminium–lithium alloys. In: Aviation materials and technologies. Technology of production of aviation metallic materials; Moscow: Research Institute of Aviation materials; 2012. p. 12–19.
- Kablov EN, Lukin VI. Characteristic features of Al–Li alloys welding. New materials and technologies in the 21st-century. Beijing; 2001.
- Lukin VI, et al. Increasing the reliability of welded joints in V-1461 high-strength aluminium–lithium alloy. Svar. Proiz. 2010;11:14–17.
- Petrovic M, et al. Friction stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage. Mater. Technol. 2010;46:215–221.
- Mishra RS, Ma ZY. Friction stir welding and processing. Mater. Sci. Eng. R. 2005;50.
- Mroczka K, et al. Microstructure of friction stir welded joints of 2017A aluminium alloy sheets. J. Microsc. 2010;237:521–525.10.1111/jmi.2010.237.issue-3
- Franchim AS, et al. Microstructural aspects and mechanical properties of friction stir welded AA2024-T3 aluminium alloy sheet. Mater. Des. 2011;32:4684–4688.10.1016/j.matdes.2011.06.055
- Samorukov ML, et al. Analytical approach to the mathematical modelling of the temperature component of friction stir welding. Trudy VIAM. 2013; 9 ( electronic scientific journal). viam-works.ru/ru/articles?art_id=246.
- Chirkov EF. The rate of softening in heating – criterion in the evaluation of the creep strength of structural alloys of the Al–Cu–Mg and Al–Cu systems. Trudy VIAM. 2013; 2 ( electronic scientific journal). viam-works.ru/ru/articles?art_id=10.
- Lukin VI, et al. Welding of aluminium alloys in aerospace industry. Svarka i diagnostika. 2013;2:47–52.
- Shtrikman MM, et al. The current state and the development of the processes of friction welding of linear joints (an analytical review). Svar. Proiz. 2007;9:35–40.
- Lukin VI, et al. Special features of the formation of the welded joint in friction stir welding of aluminium alloy V-1469. Svar. Proiz. 2012;6:30–35.