Improving the reliability of metallic structures in service in the conditions with low climatic temperatures by efficient application of advanced methods of modification of the zone of the welded jointFootnote

Selected from Svarochnoe Proizvodstvo 2016 69(9) 3–9

References

• Dynkin AA, et al., Scientific and technical problems of exploitation of the Arctic. Academic scientific-publishing, production, printing and book distribution centre of the Russian Academy of Sciences. Moscow: Nauka; 2015.
   Google Scholar
• Larionov VP, et al., New approaches to the development of advanced technologies of welding and coating for ensuring the high service reliability of metal structures and components, used in the conditions of Siberia and Far North. Vestnik akademii voennykh nauk. 2008;3.
   Google Scholar
• Larionov VP, et al., Recommendations for the technology of welding metal structures and machines, used at low temperatures. Yakutsk: Yakutsk Branch of the Siberian Division of the USSR Academy of Sciences;1987.
   Google Scholar
• Bakshi OA, et al. The combined effect of the concentration of stresses, the properties of the metal of the weld zone and the residual stresses on the fatigue of specimens in the plane stress state. Avtomaticheskaya Svarka. 1971;7:8–10.
   Google Scholar
• Vinokurov VA, et al. Welded structures. Fracture mechanics and efficiency criteria. Moscow: Mashinostroenie; 1996.
   Google Scholar
• Moskvichev VV, et al. Cracking resistance and mechanical properties of structural materials in commercial systems. Novosibirsk: Nauka; 2002.
   Google Scholar
• Lebedev BF, et al. The dependence of the toughness of the HAZ of welded joints in low alloy steels on specific energy in welding. Avtomaticheskaya Svarka. 1987;4:7–10.
   Google Scholar
• Shin HS, Park KT, Lee CH, et al. Low-temperature impact toughness of structural steel welds with different welding processes. KSCE Journal of Civil Engineering. 2015;19:1431–1437.10.1007/s12205-015-0042-8
   Web of Science ®Google Scholar
• Saraev YuN, et al. Increasing the service properties of metal structures for operation at low climatic temperatures by the methods of adaptive pulsed arc surfacing. Svarochnoe Proizvodstvo. 2015;11:33–41.
   Google Scholar
• Saraev YuN, et al. Investigations of the properties of welded joints in a manganese steel produced by low-frequency pulsed-arc welding. Deformatsiya i razrushenie. 2016;4:36–41.
   Google Scholar
• Saraev YuN, et al. Conceptual approach to the development of advanced technologies of production, repair and hardening treatment of resources-saving components and structures of armoured vehicles and tanks of the Russian Army. Vestnik Akademii voennykh nauk. 2008;3:27–30.
   Google Scholar
• Bashenko AP, et al. The effect of high dynamic pressures on the structure and mechanical properties of 38KhS and 30KhGSN2A martensitic steels. Fiz Met Metalloved. 1983;6:1202–1206.
   Google Scholar
• Saraev YuN, et al. Modification of the coatings by refractory compounds in high-energy effect as a method of increasing the service reliability of resources-saving components. Svarochnoe Proizvodstvo. 2011;7:24–30.
   Google Scholar
• Pleshanov VS, et al. Static and low-cycle strength of welded joints in low alloy steel at the mesoscale level. Svarochnoe Proizvodstvo. 2000;4:12–17.
   Google Scholar
• Loos AV, et al. Power sources for pulsed electrical engineering processes. Tomsk: Tomsk Polytechnical University; 1998.
   Google Scholar
• Saraev YuN, et al. Investigations of the effect of adaptive pulsed arc welding on the mechanical properties and the residual stresses in welded joints in 09G2S steel. Obrabotka metallov. 2013;3:19–24.
   Google Scholar
• Potap’evskii AG, et al., Welding of steels in shielding gases with a consumable electrode. The methods and technology for future. Tomsk: Tomsk Polytechnical University; 2012.
   Google Scholar
• Saraev YuN. Special features of the development of electrical engineering processes of welding and surfacing based on the algorithms for adaptive pulsed control of energy parameters of the welding conditions. Mashinostroenie (electronic journal). 2015;3:3–11.
   Google Scholar
• Kvasov FV. Special features of mechanised welding with controlled electrode metal transfer. Svarochnoe Proizvodstvo. 1999;8:27–31.
   Google Scholar
• Yapp D. Recent developments in high productivity pipeline welding. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2004;26:89–97.10.1590/S1678-58782004000100015
   Google Scholar
• Mannion B. Setting up and determining the parameters for orbital tube welding. The Fabricator. 1999;5:26–30.
   Google Scholar
• Saraev YuN. Adaptive pulsed-arc methods of mechanised welding in the construction of transmission applies. Svarochnoe Proizvodstvo. 2002;1:4–11.
   Google Scholar
• Saraev YuN. Experience with the development and practical application of adaptive pulsed arc methods of welding for the construction and repair of transmission pipelines. Voprosy materialovedeniya. 2015;1:210–219.
   Google Scholar