Influence of rotational speed on the microstructure and mechanical performance of friction-riveted thermosetting composite jointsFootnote

Selected from Soldagem & Inspeção 2016 21(1) 30–43

References

• Sedlacek G, Trumpf H. Innovative developments for bridges using FRP composites. Cambridge: Woodhead Publishing; 2007.
   Google Scholar
• Messler RW. Trends in key joining technologies for the twenty-first century. Assembly Autom. 2000;20:118–128. doi:10.1108/01445150010321733.
   Web of Science ®Google Scholar
• Amancio-Filho ST, Santos JF. Joining of polymers and polymer-metal hybrid structures: recent developments and trends. Polymer Engineering and Science. 2009;49(8):1461–1476. doi:10.1002/pen.21424.
   Web of Science ®Google Scholar
• Goushegir SM, Santos JF, Amancio-Filho ST. Friction spot joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: microstructure and mechanical performance. Mater Des. 2014;54:196–206. doi:10.1016/j.matdes.2013.08.034.
   Web of Science ®Google Scholar
• Esteves JE, Goushegir SM, Santos JF, et al. Friction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strength. Mater Des. 2015;66:437–445. doi:10.1016/j.matdes.2014.06.070.
   Web of Science ®Google Scholar
• André NM, Goushegir SM, Santos JF, et al. On the microstructure and mechanical performance of Friction Spot Joining with additional film interlayer. In: Proceedings of the Annual Technical Conference of Society of Plastics Engineers (ANTEC 2014); Las Vegas, NV: Society of Plastics Engineers; 2014.
   Google Scholar
• Abibe AB, Amancio-Filho ST, dos Santos JF, et al. Mechanical and failure behaviour of hybrid polymer-metal staked joints. Mater Des. 2013;46:338–347. doi:10.1016/j.matdes.2012.10.043.
   Web of Science ®Google Scholar
• Abibe AB, Dos Santos JF, Amancio-Filho ST. Friction staking: a novel staking joining method for hybrid structures. In: Proceedings of the Annual Technical Conference of Society of Plastics Engineers (ANTEC 2014); Las Vegas, NV: Society of Plastics Engineers; 2014.
   Google Scholar
• Amancio-Filho ST. Friction riveting: development and analysis of a new joining technique for polymer-metal multi-material structures. Welding in the World. 2011;55(1–2):13–24.10.1007/BF03263511
   Web of Science ®Google Scholar
• Rodrigues CF, Blaga L, Santos JF, et al. FricRiveting of aluminum 2024-T351 and polycarbonate: Temperature evolution, microstructure and mechanical performance. Journal of Materials Processing Technology. 2014;214(10):2029–2039. doi:10.1016/j.jmatprotec.2013.12.018.
   Web of Science ®Google Scholar
• Amancio-Filho ST. Friction riveting (‘FricRiveting’): development of a new joining technique for hybrid joints of the polymer-metal type. Part II: thermal and mechanical properties. Soldagem & Inspeção. 2011;16(4):396–404. doi:10.1590/S0104-92242011000400011.
   Google Scholar
• Blaga L, Bancila R, Santos JF, et al. Friction riveting of glass-fibre-reinforced polyetherimide composite and titanium grade 2 hybrid joints. Mater Des. 2013;50:825–829. doi:10.1016/j.matdes.2013.03.061.
   Web of Science ®Google Scholar
• Altmeyer J, Santos JF, Amancio-Filho ST. Effect of friction riveting process parameters on the joint formation and performance of Ti alloy/short-fibre reinforced polyether ether ketone joints. Mater Des. 2014;60:164–176. doi:10.1016/j.matdes.2014.03.042.
   Web of Science ®Google Scholar
• Proença BC, Blaga LB, Santos JF, et al. Force controlled friction riveting of glass fiber reinforced polyamide 6 and aluminum alloy 6056 hybrid joints. In: Proceedings of the Annual Technical Conference of Society of Plastics Engineers (ANTEC 2015); Orling: Society of Plastics Engineers; 2015.
   Google Scholar
• Amend P, Pillach B, Frick T, et al. Laser-based hot-melt bonding of thermosetting GFRP. Phys Procedia. 2012;39:147–153. doi:10.1016/j.phpro.2012.10.024.
   Google Scholar
• Huang Z, Sugiyama S, Yanagimoto J. Hybrid joining process for carbon fiber reinforced thermosetting plastic and metallic thin sheets by chemical bonding and plastic deformation. J Mater Process Technol. 2013;213(11):1864–1874. doi:10.1016/j.jmatprotec.2013.04.015.
   Web of Science ®Google Scholar
• Borba NZ, Blaga L, Canto LB, et al. Friction riveting of pultruded thermoset glass fiber reinforced polyester composite and Ti6Al4 V hybrid joints. In: Proceedings of the Annual Technical Conference of Society of Plastics Engineers (ANTEC 2014); Las Vegas, NV: Society of Plastics Engineers; 2014.
   Google Scholar
• Amancio-Filho ST, Santos JF. Influence of processing parameters on microstructure and properties of polyetherimide joined by FricRiveting: investigation of rotational speed. In: Proceedings of the Annual Technical Conference of Society of Plastics Engineers (ANTEC 2009); Chicago: Society of Plastics Engineers; 2009.
   Google Scholar
• Blaga L, dos Santos JF, Bancila R, et al. Friction riveting (FricRiveting) as a new joining technique in GFRP lightweight bridge construction. Constr Build Mater. 2015;80:167–179. doi:10.1016/j.conbuildmat.2015.01.001.
   Web of Science ®Google Scholar
• Junior WS, Handge UA, Santos JF, et al. Feasibility study of friction spot welding of dissimilar single-lap joint between poly(methyl methacrylate) and poly(methyl methacrylate)-SiO2 nanocomposite. Mater Des. 2014;64:246–250. doi:10.1016/j.matdes.2014.07.050.
   Web of Science ®Google Scholar
• Goushegir SM, Santos JF, Amancio-Filho ST. Friction spot joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: microstructure and mechanical performance. Mater Des. 2014;54:196–206. doi:10.1016/j.matdes.2013.08.034.
   Web of Science ®Google Scholar
• Neumann A. Reibschweissen von Metallen [Friction welding of metals]. 1st ed. Berlin: Verlag Technik GmbH; 1991.
   Google Scholar
• Amancio-Filho ST. Friction riveting: development and analysis of a new joining technique for polymer-metal multi-materials structures [doctorate thesis]. Hamburg: Technische Universität Hamburg-Harburg, GKSS-Forschungszentrum Geesthacht; 2007.
   Google Scholar
• Laoubi K, Hamadi Z, Benyahia AA, et al. Thermal behavior of E-glass fiber-reinforced unsaturated polyester composites. Compos Part B Eng. 2014;56:520–526. doi:10.1016/j.compositesb.2013.08.085.
   Web of Science ®Google Scholar
• Kandare E, Kandola BK, Price D, et al. Study of the thermal decomposition of flame-retarded unsaturated polyester resins by thermogravimetric analysis and Py-GC/MS. Polym Degrad Stab. 2008;93(11):1996–2006. doi:10.1016/j.polymdegradstab.2008.03.032.
   Web of Science ®Google Scholar
• Kandare E, Chukwunonso AK, Kandola BK. The effect of fire-retardant additives and surface insulative fabric on fire performance and mechanical property retention of polyester composites. Fire Mater. 2011;35(3):143–155. doi:10.1002/fam.1039.
   Web of Science ®Google Scholar
• Fiberline Composites. Structural profiles. Middelfart; 2013. [cited on 2013 Aug 26]. Available from: www.fiberline.com
   Google Scholar
• Bahadur S, Zheng Y. Mechanical and tribological behavior of polyester reinforced with short glass fibers. Wear. 1990;137(2):251–266. doi:10.1016/0043-1648(90)90138-Z.
   Web of Science ®Google Scholar
• Matthew J, Donachie J. Titanium: a technical guide. 2nd ed. Materials Park: ASM International; 2000. p. 381.
   Google Scholar
• Boyer RR. An overview on the use of titanium in the aerospace industry. Mater Sci Eng A. 1996;213(1–2):103–114. doi:10.1016/0921-5093(96)10233-1.
   Web of Science ®Google Scholar
• Amancio-Filho ST. Friction riveting (‘FricRiveting’): development of a new joining technique for hybrid joints of the polymer-metal type. Part I: process and microstructure. Soldagem & Inspeção. 2011;16(4):387–394. doi: 10.1590/S0104-92242011000400010.
   Google Scholar
• Zhou L, Liu HJ, Liu QW. Effect of rotation speed on microstructure and mechanical properties of Ti-6Al-4 V friction stir welded joints. Mater Des. 2010;31(5):2631–2636. doi:10.1016/j.matdes.2009.12.014.
   Web of Science ®Google Scholar
• Esmaily M, Nooshin Mortazavi S, Todehfalah P, et al. Microstructural characterization and formation of α’ martensite phase in Ti-6Al-4 V alloy butt joints produced by friction stir and gas tungsten arc welding processes. Mater Des. 2013;47:143–150. doi:10.1016/j.matdes.2012.12.024.
   Web of Science ®Google Scholar
• ASM International. ASM handbook: properties and selection: nonferrous alloys and special-purpose materials. Vol. 2, Materials Park; 1990.
   Google Scholar