Study of the hot-wire TIG process with AISI-316L filler material, analysing the effect of magnetic arc blow on the dilution of the weld beadFootnote

Selected from Soldagem & Inspeção 2016 21(3) 330–341.

References

• Vergara VM. Innovation of equipment and assessment of the powder-fed transferred-arc plasma process for out-of-position welding [doctorate thesis]. Florianópolis: Federal University of Santa Catarina; 2005.
   Google Scholar
• Silva CC, Miranda EC, Motta MF, et al. Influence of arc length on dilution and weld bead geometry of Ni-based alloy using GTAW process with cold wire feed. In: Associação Brasileira de Ciências Mecânicas [Brazilian Association of Mechanical Sciences]. Proceedings of the 20th International Congress of Mechanical Engineering; 2009 November 15–20; Gramado, Brazil. Rio de Janeiro: ABCM; 2009. p. 1–10.
   Google Scholar
• Miranda ED. Exploratory study of overlay welding parameters with nickel alloys employing the TIG process with cold wire feed [master’s dissertation]. Fortaleza: Ceará Federal University; 2009.
   Google Scholar
• Henon BK. Advances in automatic hot wire GTAW (TIG) welding [Internet page]. Pacoima: Arc Machines; 2015 [cited 2015 Sep 14]. Available from: http://www.arcmachines.com/news/case-studies/advances-automatic-hot-wire-gtaw-tig-welding
   Google Scholar
• Shinozaki K, Yamamoto M, Mitsuhata K, et al. Bead formation and wire temperature distribution during ULTRA-HIGH-SPEED GTA welding using pulse-heated hot-wire. Weld World. 2011;55(3-4):12–18. Doi:10.1007/BF03321281.
   Web of Science ®Google Scholar
• Lucas W. TIG and plasma welding: process techniques, recommended practices and applications. Cambridge: Abington Publishing; 1990.10.1533/9780857093264
   Google Scholar
• Shinozaki K, Yamamoto M, Nagamitsu Y, et al. Melting phenomenon during ultra-high-speed GTA welding method using pulse-heated hot-wire. Q J Jpn Weld Soc. 2009;27(2):22s–26s. Doi:10.2207/qjjws.27.22s.10.2207/qjjws.27.22s
   Google Scholar
• Canadian Center for Welding and Joining - CCWJ. HWGTAW steel 100AR DCEN CC GTAW with hot-wire addition. [Internet page]. Alberta: CCWJ; 2012 [cited 2016 Feb 03]. Available from: https://www.ualberta.ca/~ccwj/videos/pages/Intro%20High%20speed/06_Alternative%20Welding%20Processes/HWGTAW_Steel_100Ar_DCEN%20CC%20GTAW%20with%20Hot-Wire%20Addition_001/
   Google Scholar
• Lv SX, Tian XB, Wang HT, et al. Arc heating hot wire assisted arc welding technique for low resistance welding wire. Sci Technol Weld Joining. 2007;12(5):431–435. Doi:10.1179/174329307X213828.
   Web of Science ®Google Scholar
• Lv SX, Xu ZW, Wang HT, et al. Investigation on TIG cladding of copper alloy on steel plate. Sci Technol Weld Joining. 2008;13(1):10–16.10.1179/174329307X249414
   Web of Science ®Google Scholar
• Jenney CL, O’Brien A, editors. Welding Handbook: welding science and technology. 8th ed, vol. 1. Miami, FL: American Welding Society; 1991.
   Google Scholar
• Reis RP, Souza D, Scotti A. Models to describe Plasma Jet, Arc Trajectory and arc blow formation in arc welding. Weld World. 2011;55(3-4):24–32.10.1007/BF03321283
   Web of Science ®Google Scholar
• Lancaster JF. The physics of welding. Oxford: Pergamon Press; 1986.
   Google Scholar
• Burt A. Sustainability through innovative welding processes in automated applications. Mündersbach: EWM Hightec Welding GmbH; 2013. p. 4.
   Google Scholar
• Reis RP. Assessment of low current tandem GMAW processes with waveform control and with aid of laser beam. Uberlândia: Federal University of Uberlândia; 2009.
   Google Scholar
• Schwedersky MB. Research and development of the double-electrode TIG process. Florianópolis: Federal University of Santa Catarina; 2015.
   Google Scholar
• Ueguri S, Tabata Y, Shimizu T, et al. Control of deposition rates in hot wire TIG welding. Weld Int. 1987;1(4):736–742. Doi:10.1080/09507118709451085.
   Google Scholar
• Silva IG. Study of the influence of the parameters of corrosion-resistant overlay welding by the hot-wire TIG process on dilution [master’s dissertation]. Curitiba: Paraná Federal University of Technology; 2007.
   Google Scholar
• Fratari RQ, Schvartzman MMAM, Scotti A. Optimization of the parameters of weaving for buttering on sheets of carbon steel by the TIG process with AWS ER309L wire. Soldagem e Inspeção, São Paulo. 2010;15(3):209–217.10.1590/S0104-92242010000300007
   Web of Science ®Google Scholar
• Dupont JN, Marder AR. Dilution in single pass arc welds. Metall Mater Trans B. 1996;27B(3):481–489. Doi:10.1007/BF02914913.
   Web of Science ®Google Scholar
• Kou S. Welding metallurgy. NJ: Wiley; 2003.
   Google Scholar
• Miranda ED, Silva CC, Motta MF, et al. Assessment of the use of the weaving on the level of dilution and weld bead geometry in TIG welding with automatic cold wire feed. Soldagem & Inspeção. 2015;20(2):180–190. Doi:10.1590/0104-9224/SI2002.06.
   Web of Science ®Google Scholar