References
- Wang X, Kustov S, Van Humbeeck J. Characterization of wire arc additively manufactured titanium aluminide functionally graded material. Microstructure, mechanical properties and oxidation behaviour. Adv Mater Res-switz. 2018;734:110–119.
- Parthasarathy J, Starly B, Raman S. A design for the additive manufacturing of functionally graded porous structures with tailored mechanical properties for biomedical applications. J Manuf Process. 2011;13(2):160–170.
- Levy A, Miriyev A, Elliott A, et al. Additive manufacturing of complex-shaped graded TiC/steel composites. Adv Mater Res-switz. 2017;118:198–203.
- Onuike B, Bandyopadhyay A. Additive manufacturing of inconel 718 – ti4Al4V bimetallic structures. Addit Manuf. 2018;22:844–851.
- Zhao Z, Li J, Bai P, et al. Microstructure and mechanical properties of TiC-reinforced 316L stainless steel composites fabricated. METALS. 2019;9(2):267–282.
- Kang N, Coddet P, Wang J, et al. A novel approach to in-situ produce functionally graded silicon matrix composite by selective laser melting. Compos Struct. 2017;172:251–258.
- Kuo CN, Chua CK, Peng PC, et al. Microstructure evolution and mechanical property response via 3D printing parameter development of Al-Sc alloy. Virtual Phys Prototyping. 2020;15(1):120–129.
- Schrandt C. Additive Fertigung von Bauteilen und Strukturen - Berstdruckbestimmung an additiv gefertigten Bauteilen (Additive manufacturing of components and structures - burst pressure determination on additive manufactured components), Richard Hans Albert, Schramm Britta und Zipsner Thomas (Hrsg.), Wiesbaden: Springer Fachmedien Wiesbaden, 2017.
- Concept Laser GmbH 201 technical date – X line. 2000R. Laserschmelzanlage, [online]. [2018 01 02]. https://www.concept-laser.de/fileadmin/Blaue_Broschueren/1708_X_LINE_2000R_DE_update_2__lowres_einzel.pdf
- Bandyopadhyay A, Krishna BV, Xue W, et al. Application of laser engineered net shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants. J Mater Sci-mater M. 2009;20(S1):29–34.
- Bobbio LD, Otis RA, Borgonia JP, et al. Additive manufacturing of a functionally graded material from Ti-6Al-4V to invar: experimental characterization and thermodynamic calculations. ACTA MATER. 2017;127:133–142.
- Carroll BE, Otis RA, Borgonia JP, et al. Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition. ACTA MATER. 2016;108:46–54.
- Shedaeian E, Toyserkani E. Additive manufacturing functionally graded titanium structures with selective closed cell layout and controlled morphology. Int J Adv Manuf Tech. 2018;96(9–12):3459–3469.
- Nam S, Cho H, Kim C, et al. Effect of process parameters on deposition properties of functionally graded STS 316/Fe manufactured by laser direct metal deposition. METALS. 2018;8(8):607–622.
- Graf B, Marko A, Petrat T, et al. 3D laser metal deposition in an additive manufacturing process chain. in: Proceedings 1st international congress on welding, additive manufacturing and associated non-destructive testing, 2017, Metz, France.
- Hoefer K, Hälsig A, Mayr P. Arc-based additive manufacturing of steel components – comparison of wire- and powder-based variants. Weld World. 2018;62(2):243–247.
- Hoefer K, Rodriquez J, Haelsig A, et al. Fabrication of SS316L to Ni80Cr20 graded structures by 3D plasma metal deposition. Weld World. 2020;64(8):1307–1311.
- Hoefer K, Nitsche A, Abstoss K-G, et al. Multi-material additive manufacturing by 3D plasma metal deposition for graded structures of super duplex alloy 1.4410 and the austenitic corrosion resistant alloy 1.4404. J Mater. 2019;71(4):1554–1559.