References
- Zlenko MA, Nagaitsev MV, Dovbysh VM. Additive manufacturing in engineering. A handbook for engineers. Moscow: State Scientific Centre of the Russian Federation, Scientific-Research Automotive Institute “NAMI”; 2015. p. 220.
- Shitsyn YD, Belinin DS, Neulybin SD. Production of multilayer materials by plasma deposition with a direct-acting, reverse polarity arc. Svarochnoe proizvodstvo. 2017;(8):35–39.
- Karen MB, Hafley TRA. Characterization of 2219 aluminum produced by electron beam freeform fabrication. 13th Solid Freeform fabrication Symposium; 2002 August 5–7; Austin, TX. University of Texas at Austin.
- Heralić, A. Monitoring and control of robotized laser metal-wire deposition [doctoral thesis]. Göteborg, Sweden: Chalmers University of Technology; 2012. https://research.chalmers.se/publication/155362
- Wang L, Felicelli SD, Coleman J, et al. Microstructure and mechanical properties of electron beam deposits of AISI 316L stainless steel. International Mechanical Engineering. Congress & Exposition; 2011 November 11–17; Denver, Colorado, USA.
- Zuev IV. Treatment of materials with concentrated energy fluxes: a university textbook for the speciality “Machines and technology for high-performance treatment processes”. Moscow Power Engineering Institute (Technical University). Moscow: Publication of the Moscow Power Engineering Institute (MEI); 1998. p. 162.
- Konovalov AV, Kurkin AS, Makarov EL, et al. Theory of welding processes: a university textbook. Moscow: Publication of the Bauman Moscow State Technical University; 2007. p. 752.