References
- Roland F, Manzon L, Kujala P, et al. Advanced joining techniques in European shipbuilding. J Ship Prod Des. 2004 Aug;20(3):200–210. .
- Nielsen SE. High Power Laser Hybrid Welding -Challenge and Perspectives. Physics Procedia. 2017;78:24–34.
- Ribic B, Palmer TA, DebRoy T, et al. Problems and issues in laser-arc hybrid welding. Int Mater Rev. 2009 July;54(4):223–244. .
- Turichin G, Kuznetsov M, Tsibulskiy I, et al. Hybrid laser-arc welding of the high-strength shipbuilding steels: equipment and technology. Phys Procedia. 2017;89:156–163.
- Moeller R, Koczera S. Shipyard uses laser-GMAW hybrid welding to achieve one-sided welding - New system reforms prefabrication in shipbuilding the fabricator. 2003 Nov 20; [cited 2020 Sept 23]. Available from: https://www.thefabricator.com/thefabricator/article/arcwelding/shipyard-uses-laser-gmaw-hybrid-welding-to-achieve-one-sided-welding
- Yokura T, Kusaba T, Kanno H, et al. Approach with advanced welding technology at shipyard. J Jap Weld Soc. 2017;86(7):6–10. (in Japanese)
- Watanabe T, Tsubota S, Fujiya Y, et al. Guideline for development of innovative processing – laser arc welding. J Jap Weld Soc. 2018;87(3):36–41. (in Japanese)
- Koga H, Goda H, Terada S, et al. First application of hybrid laser-arc welding to commercial ships. Mitsubishi Heavy Ind Techn Rev. 2010;47-3:59–64.
- Kimura R, Ochiai H, Nakashima Y, et al. Application of laser - arc hybrid welding to japan coast guard patrol vessel large. Mitsui Zosen Techn Rev. 2016;216:13–19. (in Japanese).
- Class NK. Guidelines on laser-arc hybrid welding, (Ver. 3). Tokyo: Nippon Kaiji Kyokai; 2016.
- Gotoh K, Takeshita R, Uemura T, et al., Joint industrial project on the introduction of laser-arc hybrid welding technology to hull construction process - (part 2) influence of factors on weldability. Conference proceedings, the Japan Society of Naval Architects and Ocean Engineers. Vol. 28; 2019. p. 265–269. (in Japanese)
- Gotoh K, Uemura T, Unchino I, et al. Joint industrial project on the introduction of laser-arc hybrid welding technology to hull construction process - (part 4) construction trial of butt welded joint with long welding length. Conference proceedings, the Japan Society of Naval Architects and Ocean Engineers, Nagasaki, Japan. Vol. 28; 2019. p. 277–282. (in Japanese)
- Gotoh K, Uemura T, Uchino I, et al.: Overview of the joint industrial project for practical application of laser-arc hybrid welding in construction of general merchant ships in Japan. In Proceedings of 14th International Symposium on Practical Design of Ships and Other Floating Structures, Yokohama, Japan, Session ID. T1-D-3; 2019.
- Kataoka T, Ikeda R, Yasuda K. Development of ultra-low spatter CO2 gas-shielded arc welding process “J-STAR® Welding”. JFE Techn Rep. 2007 Dec;10:31–34.
- Sumi H, Kataoka T, Kitani Y. Application of narrow gap welding process with “J-STARTM welding” to shipbuilding and construction. JFE Techn Rep. 2015 Mar;20:112–117.
- Sumi H, Kataoka T, Kitani Y, Oi K. Laser-arc hybrid welding using rem bearing wire. Proceedings of the 81st Laser Materials Processing Conference, Suita, Osaka. 2014 May. p. 29–32.
- Kadoya T. In-process Depth Meter(IDM) for laser welding. J Jap Weld Soc. 2015;84(3):6–9. (in Japanese)
- Yamane: S. Tracking of welding using image processing. J Jap Weld Soc. 2015;84(4):35–42. (in Japanese)
- Class NK. Rules for the survey and construction of steel ships part K-materials. Tokyo: Nippon Kaiji Kyokai; 2019.
- Yamamoto: T. How to make a hardness test in the right way. J Jpn Soc Precis Eng. 2009;75-10:1183–1188. (in Japanese)
- Otani T, Tsukamoto S, Arakane G, et al. Mechanical characteristics of high power CO2 laser welding joints of ultra-fine grained high strength steel. Q J Jpn Weld Soc. 2003;21-3:425–432. (in Japanese)
- Hagihara Y, Takai K, Tsukamoto S, et al. Toughness evaluation of laser welds using side-grooved charpy test. Q J Jpn Weld Soc. 2007;25-1:165–172. (in Japanese)