Effect of residual stress modification technique on CTOD test results in heavy thick welded joints

References

• ISO 12135: Metallic materials - Unified method of test for the determination of quasistatic fracture. 2016.
   Google Scholar
• WES 1108: Standard test method for Crack-Tip Opening Displacement (CTOD) fracture toughness measurement. 2016.
   Google Scholar
• BS 7448-1: Fracture Mechanics Toughness Tests - Part 1: Method for determination of KIc, critical CTOD and critical J values of metallic materials. 1991.
   Google Scholar
• ISO 15653: Metallic materials - Methods of test for the determination of quasistatic fracture toughness of welds. 2018.
   Google Scholar
• WES 1109: Guideline for Crack-Tip Opening Displacement (CTOD) fracture toughness test method of weld heat-affected zone. 1995.
   Google Scholar
• ASTM E1820: Standard Test Method for Measurement of Fracture Toughness. 2020.
   Google Scholar
• Towers OL, Dawes MG. Welding institute research on the fatigue precracking of fracture toughness specimens, elastic-plastic fracture test methods: the user’s experience. ASTM STP. 1985;856:23–26.
   Google Scholar
• Machida S, Miyata T, Toyosada M, et al. Study of methods for CTOD testing of weldments, fatigue and fracture testing of weldments. ASTM STP. 1990;1058:142–156.
   Google Scholar
• Reemsnyder HS, Pisarski HG, Dawes MG. Residual stresses and fatigue precracking techniques for weldment fracture toughness specimens. J Test Eval. 1991;20-6:416–423.
   Web of Science ®Google Scholar
• Jeong S, Kim H, Shin S, et al. Effect of reverse bending method on pre-crack straightness in CTOD test of welded thick steel plates. Proceedings of IMECE 2014, International Mechanical Engineering Congress and Exposition, Montreal, Quebec, Canada, 2014, ASME, Paper IMEC 201437909 (2014).
   Google Scholar
• Mikami Y, Kawabata T, Tagawa T, et al. Numerical simulation of residual stress modification by reverse bending of notched fracture toughness test specimens of multipass welds. Theor Appl Fract Mech. 2017;92:214–222.
   Web of Science ®Google Scholar
• Shimada Y, Shimanuki H, and Inoue T. Effect of welding residual stress modification methods applied to weld joint CTOD specimen for test results. Proceedings of the Welded Structures Symposium 2014 Osaka, Japan. 2014. (in Japanese)
   Google Scholar
• Inoue T. Simple corrected reversed bending CTOD test method. JP 2015-502260. 2015. (in Japanese).
   Google Scholar
• Inoue T. High-accuracy reversed bending method CTOD test. JP 2015-502261. 2015. (in Japanese).
   Google Scholar
• Nishikawa H, Oda I, Shibahara M, et al. Three-dimensional thermal-elastic-plastic FEM analysis for predicting residual stress and deformation under multi-pass welding. Proc 14th Int Offshore Polar Eng Conf. 2004;4:126–132.
   Google Scholar
• Murakawa H, Oda I, Ito S, et al. Iterative substructure method for fast computation of thermal elastic plastic welding problems. J Kansai Soc Naval Arch Japan. 2005;243:67–70. (in Japanese).
   Google Scholar
• Nishikawa H, Serizawa H, Murakawa H. Development of large-scaled FEM for analysis of mechanical problems in welding. J Japan Soc Naval Arch Ocean Eng. 2005;2:379–385. (in Japanese).
   Google Scholar
• Nishikawa H, Serizawa H, Murakawa H. Actual application of large-scaled FEM for analysis of mechanical problems in welding. Q J Jpn Weld Soc. 2006;24(2):168–173. (in Japanese).
   Google Scholar
• Nishikawa H, Serizawa H, Murakawa H. Actual application of FEM to analysis of large scale mechanical problem in welding. Sci Tec Weld Joining. 2007;12(2):147–152.
   Web of Science ®Google Scholar
• Woo W, An GB, Kingston EJ, et al. Through-thickness distributions of residual stresses in two extreme heat-input thick welds: a neutron diffraction, contour method and deep hole drilling study. Acta Materialia. 2013;61:3564–3574.
   Web of Science ®Google Scholar
• Mikami Y, Kitano H, and Kawabata T. Through process modeling of the fracture toughness test of multipass welds incorporating residual stress distribution. Procedia Struct Integr 2018;13:1804–1810.
   Google Scholar
• Miki C, Sasaki E, Kyuba H, et al. Deterioration of fracture toughness of steel by effect of tensile and compressive prestrain. Proc Japan Soc Civil Eng. 2000;640:165–175. (in Japanese).
   Google Scholar
• Meith WA, Panontin TL, and Hill MR. Analytical and experimental study of fracture in bend specimens subjected to local compression. In: Reuter WG, and Piascik RS, editors. Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417. West Conshohocken(PA): American Society for Testing and Materials; 2002. p. 425–441.
   Google Scholar