Stud shape and joint strength for low carbon steel joints fabricated by friction stud welding with low load force requirement

References

• Association of Stud Welding, Japan. Guide of stud welding construction for weld technician. Tokyo, Japan: Association of Stud Welding; 2012.
   Google Scholar
• Nishikawa W. The principal and application field of stud welding. J Jpn Weld Soc. 2002;71(8):575–580.
   Google Scholar
• Nakaseko Y, Sakai T, Suzuki J, et al. Reducing the defects of joints welded in the horizontal position using a large diameter steel stud. Q J Jpn Weld Soc. 2017;35(2):57–62.
   Google Scholar
• Kimura M, Kusaka M, Kaizu K. Joint strength of low carbon steel joints and its selection guide of friction welding conditions for low force requirements made by fiction stud welding method. Q J Jpn Weld Soc. 2018;36(2):135–144.
   Google Scholar
• European Aluminium Association. EAA aluminium automotive manual– joining 7. Solid state welding; 2015.
   Google Scholar
• Fukunaga K. Friction spot joining (FSJ) robot technology. J Jpn Weld Soc. 2016;85(7):652–656.
   Google Scholar
• Kimura M, Fujii T, Utsumi D, et al. Development of autocompleting friction welding method. Sci Technol Weld Joining. 2008;13(2):184–191.
   Web of Science ®Google Scholar
• Kimura M, Kusaka M, Seo K, et al. Relationship between the friction time, friction torque, and joint properties of friction welding for the low heat input friction welding method –study of joining mechanism of friction welding (report 3)–. Q J Jpn Weld Soc. 2002;20(4):559–565.
   Google Scholar
• Kimura M, Kusaka M, Kaizu K. Effect of friction welding condition on joint properties of austenitic stainless steel joints by friction stud welding. Q J Jpn Weld Soc. 2016;34(2):102–111.
   Google Scholar
• Okita K, Aritoshi M, Kishimoto W, et al. Study on the friction welding of different diameter bars (report 1) –effect of relative difference of bar diameter on the friction welding phenomenon. J Jpn Weld Soc. 1981;50(2):189–195.
   Google Scholar
• Fukakusa K. On real rotational contact plane in friction welding of different diameter materials and dissimilar materials –fundamental study of friction welding. Q J Jpn Weld Soc. 1996;14(3):483–488.
   Google Scholar
• Shinoda T, Takegami H. Friction stud welding of small diameter aluminum alloy for automobile use. Proceedings of International Symposium on Joining Technologies in Advanced Automobile Assembly; 2005. p. 27–35.
   Google Scholar
• Masuda T, Takada Y, Miyachi S, et al. A consideration of relationship between stud diameter and steel plate thickness. Kawada Tech Rep. 2005;24:14–19.
   Google Scholar
• Japan Society of Steel Construction. Fatigue design recommendations for steel structures. Tokyo: Gihodo shuppan; 2012. p. 31–35.
   Google Scholar
• Nakayama H, Ohhira K, Okita K, et al. Fatigue strength characteristics and fractographic features of SUS 304/SUS 304 friction welded butt joint. J Soc Mater Sci Jpn. 1984;33(367):447–453.
   Google Scholar
• Hasegawa M. Effect of friction welding conditions on the fatigue strength of steel welded joints with flash. Q J Jpn Weld Soc. 1995;13(3):463–469.
   Google Scholar
• Kimura M, Kusaka M, Seo K, et al. Properties of low carbon steel joint by low heat input friction welding method. Proceedings 57th Assembly of IIW, Osaka, Japan, International Institute of Welding, Doc.III-1290-04, July 2004, 139–149.
   Google Scholar
• Morikawa K, Kawai G, Ochi H, et al. Strength of 2017 aluminum alloy stud joints by friction welding. J Light Metal Weld Construct Jpn. 2010;48(10):390–395.
   Google Scholar
• Ochi H, Morikawa K, Moritani T, et al. Strength of 5083 aluminum alloy stud joints. J Jpnese Soc Streng Frac Mater. 2013;47(1):1–6.
   Google Scholar
• Morimoto T. Preventive means of porosity on gas shielded arc welding. J Jpn Weld Soc. 2004;73(8):559–564.
   Google Scholar
• Okita K, Fukuchi Y, Aritoshi M. Fatigue crack growth behavior in friction welded butt joints of free cutting stainless steel. J Soc Mater Sci Jpn. 1989;38(432):1033–1039.
   Google Scholar