References
- Ren D, Zhao D, Zhao K, et al. Resistance ceramic-filled annular welding of DP980 high-strength steel. Mater Des. 2019;183:108118.
- Pouranvari M. Effect of welding current on the mechanical response of resistance spot welds of unequal thickness steel sheets in tensile-shear loading condition. Int J Multidiscipl Sci Eng. 2011;2:63–67.
- Pouranvari M, Marashi SPH. Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors. Mater Sci Eng A. 2011;528(29–30):8337–8343.
- Kang H, Barkey ME, Lee Y. Evaluation of multiaxial spot weld fatigue parameters for proportional loading. Int J Fatigue. 2000;22(8):691–702.
- Roth S, Hezler A, Pampus O, Coutandin S, et al. Influence of the process parameter of resistance spot welding and the geometry of weldable load introducing elements for FRP/metal joints on the heat input. J Adv Join Process. 2020;2:100032.
- De A, Gupta OP, Dorn L. An experimental study of resistance spot welding in 1 mm thick sheet of low carbon steel. Proc Inst Mech Eng. 1996;210(4):341–347.
- Aslanlar S, Ogur O, Ozsarac U, et al. Effect of welding current on mechanical properties of galvanized chromide steel sheets in electrical resistance spot welding. Mater. Des. 2007;28(1):2–7.
- Pouranvari M, Marashi SPH. Critical review of automotive steels spot welding: process, structure and properties. Sci Technol Weld Joining. 2013;18(5):361–403.
- Pereira AM, Ferreira JM, Loureiro A, et al. Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy. Mater Des. 2010;31(5):2454–2463.
- Luo Y, Wan R. Study on the nugget growth in single-phase ac resistance spot welding based on the calculation of dynamic resistance. J Mater Process Technol. 2016;229:492–500.
- Tan W, Zhou Y, Kerr HW, Lawson S. A study of dynamic resistance during small scale resistance spot welding of thin Ni sheets. J Phys D: Appl Phys. 2004;37(14):1998–2008.
- Hovanski Y, Santella ML, Grant GJ. Friction stir spot welding of hot-stamped boron steel. Scr Mater. 2007;157:873–876.
- Turnage SA, Darling KA, Rajagopalan M, et al. Influence of variable processing conditions on the quasi-static and dynamic behaviors of resistance spot welded aluminum 6061-T6 sheets. Mater Sci Eng A. 2018;724:509–517.
- Rao SS, Chhibber R, Arora KS, Shome M. Resistance spot welding of galvannealed high strength interstitial free steel. J Mater Process Technol. 2017;246:252–261.
- Janardhan G, Kishore K, Dutta K, et al. Tensile and fatigue behavior of resistance spot-welded HSLA steel sheets: effect of pre-strain in association with dislocation density. Mater Sci Eng A. 2020;93:139796.
- Janardhan G, Kishore K, Mukhopadhyay G, et al. Fatigue properties of resistance spot welded dissimilar interstitial-free and high strength micro-alloyed steel sheets. Met Mater Int. 2021;27(9):3432–3448.
- Ren S, Ma N, Tsutsumi S, et al. Post-weld cold working for fatigue strength improvement of resistance spot welded joint of advanced high-strength steel. J Mater Process Technol. 2022;299:117364.
- Ertas AH, Akbulut M. Experimental study on fatigue performance of resistance spot-welded sheet metals. Int J Adv Manuf Technol. 2021;114(3–4):1205–1218.
- Marques LFN. Fatigue life assessment of weld joints manufactured by GMAW and CW-GMAW processes. Sci Technol Weld Joining. 2016;22:1–10.
- Effertz PS, Infante V, Quintino L, et al. Fatigue life assessment of friction spot welded 7050-T76 aluminum alloy using Weibull distribution. Int J Fatigue. 2016;87:381–390.
- Sakin R, Ay I. Statistical analysis of bending fatigue life data using Weibull distribution in glass-fiber reinforced polyester composites. Mater Des. 2008;29(6):1170–1181.
- Geng H, Sun L, Li G, et al. Fatigue fracture properties of magnetic pulse welded dissimilar Al-Fe lap joints. Int J Fatigue. 2019;121:146–154.
- Park ID, Nam K-W, Kang CY. Shear strength of ball studs according to the resistance welding conditions & reliability testing based on the Weibull distribution function. J Mech Sci Technol. 2018;32(12):5647–5652.