References
- Asai S, Tanaka M, Yamane S, et al. Recent progresses of welding and joining engineering. Yosetsu Gakkai Shi. 2020;89(5):322–351.
- Shigeta M, Tanaka M. Diagnostics and numerical analyses for thermal and flow phenomena in arc welding, the journal of the international electrical engineers of Japan. IEEJ J. 2020;140(6):350–353.
- Shigeta M, Tanaka M. Visualization of electromagnetic-thermal- fluid phenomena in arc welding. Jpn J Appl Phys. 2020;59:SA0805.
- Tanaka K, Shigeta M, Komen H, et al. Electrode contamination caused by metal vapor transport during tungsten inert gas welding. Sci Technol Weld Joining. 2021;26(3):258–263.
- Abe Y, Fujimoto T, Nakatani M, et al. Development of a welding condition optimization program for narrow gap SAW. Q J Jpn Weld Soc. 2020;38(2):98s–102s.
- Abe Y, Fujimoto T, Nakatani M, et al. Study on proper welding condition for ultra-narrow gap submerged arc welding. Q J Jpn Weld Soc. 2021;39(1):64–74.
- Tsujimura Y, Tanaka M. Numerical simulation of heat source property with metal vapor behavior in GMA welding. Q J Jpn Weld Soc. 2012;30(1):68–76.
- Seto M, Aoki A, Tanaka M, et al. Study on new GMA welding process with duplex current feeding. Q J Jpn Weld Soc. 2016;34(2):150–157.
- Aoki A, Tashiro S, Kurokawa H, et al. Application of duplex current feeding metal inert gas welding to overlay welding using nickel based alloy welding. J Smart Process. 2019;9(3):140–147.
- Tashiro S, Seto M, Aoki A, et al. Numerical simulation of new welding process with duplex current feeding. Q J Jpn Weld Soc. 2016;34(4):223–230.
- Seto M, Aoki A, Tashiro S, et al. Comparison of wettability of beads in MIG welding process with duplex current feeding and conventional MIG welding process. J Smart Process. 2017;6(1):28–32.
- Tashiro S, Tanaka M, Seto M, et al. Numerical analysis on influence of electrical conductivity of wire on droplet temperature in duplex current feeding MIG welding. Q J Jpn Weld Soc. 2017;35(2):51s–55s.
- Tashiro S, Aoki A, Kuroawa H, et al. Numerical prediction of feasibility to lower droplet temperature in duplex current feeding MIG welding process. Q J Jpn Weld Soc. 2020;38(2):44s–48s.
- Aoki A, Tashiro S, Kurokawa H, et al. Influence of current feeding position of duplex current feeding MIG welding on droplet heat quantity. Materials. 2019;12(21):3590.
- Aoki A, Tashiro S, Kurokawa H, et al. Development of novel MIG welding process with duplex current feeding. J Manuf Process. 2019;47:74–82.
- Ozawa M, Morita T. The measurement of heat quantity in melted metals. J Jpn Weld Soc. 1963;32(2):130–137.
- Yamazaki K, Yamamoto E, Suzuki K, et al. The measurement of metal droplet temperature in GMA welding by infrared two-color pyrometry. Q J Jpn Weld Soc. 2008;26(3):214–219.
- Soderstrom EJ, Scott KM, Mendez PF. Calorimetric measurement of droplet temperature in GMAW. Weld J. 2011;90(4):1s–8s.
- McIntosh C, Chapuis J, Mendez PF. Effect of Ar-CO2 gas blends on droplet temperature in GMAW. Weld J. 2016;95(8):273s–279s.
- Mamat SB, Methong T, Tashiro S, et al. Droplet temperature measurement in metal inert gas welding process by using two color temperature measurement method. Q J Jpn Weld Soc. 2017;35(2):160s–164s.
- Kataoka T, Ikeda R, Ono M, et al. Effect of REM addition of wire on CO2 gas shielded arc welding. Q J Jpn Weld Soc. 2008;26(1):37–41.
- Ueyama T. Welding power sources. Yosetsu Gakkai Shi. 2008;77(2):129–134.
- Tong H, Ueyama T, Ushio M. Study on phenomena of wire melting and bead formation in AC pulsed MIG welding. Q J Jpn Weld Soc. 2004;22(3):389–397.
- Tong H, Nakata K, Tanaka M, et al. Mechanism of fume reduction in welding Al-Mg alloys using AC pulsed MIG process. Q J Jpn Weld Soc. 2004;22(3):375–388.
- Maruo H, Hirata Y, Noda Y. Heat contents and temperature of metal droplets in pulsed MIG welding. Q J Jpn Weld Soc. 1984;2(4):573–578.
- Aoki A, Tashiro S, Kurokawa H, et al. Influence of welding materials of duplex current feeding MIG welding. Q J Jpn Weld Soc. 2020;38(2):16s–20s.
- Soderstrom E. Gas metal arc-welding electrode heat-and-mass transfer mechanisms [doctoral thesis]. Colorado School of Mines; 2009.
- Halmøy E. Wire melting rate, droplet temperature and effective anode melting potential. Proceedings of The International Conference on Arc Physics and Weld Pool Behavior; 1979.
- Research Committee on Weld Arc Physics. Physics of welding process. Kuroki Publishing Co.; 1996.
- Kanemaru S, Sasaki T, Sato T, et al. 3D numerical analysis model for TIG-MIG hybrid welding process. Q J Jpn Weld Soc. 2012;30(4):306–312.
- Tsujimura Y, Tanaka M. Analysis of behavior of arc plasma conditions in MIG welding with metal transfer-visualization of phenomena of welding arc by imaging spectroscopy. Q J Jpn Weld Soc. 2012;30(4):288–297.
- Methong T, Shigeta M, Tanaka M, et al. Diagnostic of heat source characteristics in gas metal arc welding using CO2 shielding gas. Q J Jpn Weld Soc. 2017;35(2):103s–107s.
- Hajossy R, Morva I. Cathode and anode falls od arcs with fusible electrodes. J Phys D Appl Phys. 1994;27(10):2095–2101.
- Tanaka M. Physics of welding arcs. J Jpn Weld Soc. 2018;87(8):555–574.
- Tanaka M, Methong T, Komen H, et al. Effect of shielding gas composition on gas metal arc welding phenomena using rare earth metal added wire. Q J Jpn Weld Soc. 2020;38(4):438–447.