Investigation on thermo-mechanical performances of friction stir welding of aluminum alloys (AA6063)

References

• Nishikawa W. The principle and application field of stud welding. Weld Int. 2003;17(9):699–705.
   Google Scholar
• Ikuta A. Influence of material adhered to welding tool in consideration of shape of cutting tools on friction stir spot welds. Weld Int. 2022;36(1):53–64.
   Google Scholar
• García-Bernal MA, Mishra RS, Verma R, et al. Influence of friction stir processing tool design on microstructure and superplastic behavior of Al-Mg alloys. Mater Sci Eng A. 2016;670:9–16.
   Web of Science ®Google Scholar
• Fukuda T. Friction stir welding (FSW) process. Weld Int. 2001;15(8):611–615.
   Google Scholar
• Hovanski Y, Carsley J, Mishra RS, et al. Friction stir welding and processing. Mater Sci Eng R Rep. 2005;50:1–78.
   Google Scholar
• Akinlabi ET. Effect of shoulder size on weld properties of dissimilar metal friction stir welds. J. Mater Eng Perform. 2012;21(7):1514–1519.
   Web of Science ®Google Scholar
• Murr LE, Li Y, Flores RD, et al. Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals. Mater Res Innov. 1998;2(3):150–163.
   Web of Science ®Google Scholar
• Li Y, Trillo EA, Murr LE. Friction-stir welding of aluminum alloy 2024 to silver. J Mater Sci Lett. 2000;19(12):1047–1051.
   Google Scholar
• Sato YS, Kokawa H. Friction stir welding (FSW) process. Weld Int. 2003;17(11):852–855.
   Google Scholar
• Küçükömeroğlu T, Aktarer SM, İpekoğlu G, et al. Microstructure and mechanical properties of friction-stir welded St52 steel joints. Int J Miner Metall Mater. 2018;25(12):1457–1464.
   Google Scholar
• İpekoğlu G, Çam G. Effects of initial temper condition and postweld heat treatment on the properties of dissimilar friction-stir-welded joints between AA7075 and AA6061 aluminum alloys. Metall Mat Trans A. 2014;45(7):3074–3087.
   Web of Science ®Google Scholar
• Çam G, İpekoğlu G, Tarık Serindağ H. Effects of use of higher strength interlayer and external cooling on properties of friction stir welded AA6061-T6 joints. Sci Technol Weld Join. 2014;19(8):715–720.
   Web of Science ®Google Scholar
• İpekoğlu G, Erim S, Çam G. Investigation into the influence of post-weld heat treatment on the friction stir welded AA6061 Al-Alloy plates with different temper conditions. Metall Mat Trans A. 2014;45(2):864–877.
   Google Scholar
• Bozkurt Y, Salman S, Çam G. Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints. Sci Technol Weld Join. 2013;18(4):337–345.
   Web of Science ®Google Scholar
• Çam G, Javaheri V, Heidarzadeh A. Advances in FSW and FSSW of dissimilar Al-alloy plates. J Adhes Sci Technol. 2022:1–33.
   Web of Science ®Google Scholar
• Heidarzadeh A, Mironov S, Kaibyshev R, et al. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution. Prog Mater Sci. 2021;117:100752.
   Web of Science ®Google Scholar
• Kashaev N, Ventzke V, Çam G. Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications. J Manuf Process. 2018;36:571–600.
   Web of Science ®Google Scholar
• Çam G, İpekoğlu G. Recent developments in joining of aluminum alloys. Int J Adv Manuf Technol. 2017;91(5–8):1851–1866.
   Web of Science ®Google Scholar
• Çam G. Friction stir welded structural materials: beyond Al-alloys. Int Mater Rev. 2011;56(1):1–48.
   Web of Science ®Google Scholar
• Çam G, Mistikoglu S, Pakdil M. Microstructural and mechanical characterization of friction stir butt joint welded 63% Cu-37% Zn brass plate. Weld J. 2009;88:225–232.
   Web of Science ®Google Scholar
• Küçükömeroğlu T, Aktarer SM, Çam G. Investigation of mechanical and microstructural properties of friction stir welded dual phase (DP) steel. IOP Conf Ser Mater Sci Eng. 2019;629(1):012010.
   Google Scholar
• Küçükömeroğlu T, Aktarer SM, İpekoğlu G, et al. Mechanical properties of friction stir welded St 37 and St 44 steel joints. MP. 2018;60(12):1163–1170.
   Google Scholar
• Pishevar MR, Omidvar H, Mohandesi JA, et al. Effect of applying second-pass welding and welding parameters on the defects and mechanical properties in friction-stir lap-welded AA5456 sheets. Weld World. 2016;60(3):497–506.
   Google Scholar
• İpekoğlu G, Çam G. Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance. IOP Conf Ser Mater Sci Eng. 2019;629(1):012007.
   Google Scholar
• Çam G, Ventzke V, Dos Santos JF, et al. Characterisation of electron beam welded aluminium alloys. Sci Technol Weld Join. 1999;4(5):317–323.
   Web of Science ®Google Scholar
• Çam G, Koçak M. Microstructural and mechanical characterization of electron beam welded Al-alloy 7020. J Mater Sci. 2007;42(17):7154–7161.
   Web of Science ®Google Scholar
• Carlone P, Palazzo GS. Characterization of TIG and FSW weldings in cast ZE41A magnesium alloy. J Mater Process Technol. 2015;215:87–94.
   Web of Science ®Google Scholar
• Ilangovan M, Rajendra Boopathy S, Balasubramanian V. Effect of tool pin profile on microstructure and tensile properties of friction stir welded dissimilar AA 6061–AA 5086 aluminium alloy joints. Def Technol. 2015;11(2):174–184.
   Web of Science ®Google Scholar
• James SJ, Ganesan M, Santhamoorthy P, et al. Development of hybrid aluminium metal matrix composite and study of property. Mater Today Proc. 2018;5(5):13048–13054.
   Google Scholar
• Sadiq TO, Hameed BA, Idris J, et al. Effect of different machining parameters on surface roughness of aluminium alloys based on Si and Mg content. J Braz Soc Mech Sci Eng. 2019;41:1–11.
   Google Scholar
• Mohammadtaheri M, Haddad-Sabzevar M, Mazinani M. The effects of heat treatment and cold working on the microstructure of aluminum alloys welded by friction stir welding (FSW) technique. AMR. 2011;409:287–292.
   Google Scholar
• Alam MP, Sinha AN. Optimization of process parameters of friction stir welding using desirability function analysis. Weld Int. 2022;36(3):1–15.
   Google Scholar
• Suri A. An improved FSW tool for joining commercial aluminum plates. Procedia Mater Sci. 2014;6:1857–1864.
   Google Scholar
• Khan NZ, Khan ZA, Siddiquee AN. Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength of friction stir welded 6063 aluminium alloy. Mater Today Proc. 2015;2(4–5):1450–1457.
   Google Scholar
• Dawood HI, Mohammed KS, Rahmat A, et al. Effect of small tool pin profiles on microstructures and mechanical properties of 6061 aluminum alloy by friction stir welding. Trans Nonferrous Met Soc China. 2015;25(9):2856–2865.
   Web of Science ®Google Scholar
• Radisavljevic I, Zivkovic A, Radovic N, et al. Influence of FSW parameters on formation quality and mechanical properties of Al 2024-T351 butt welded joints. Trans Nonferrous Met Soc China. 2013;23(12):3525–3539.
   Google Scholar
• Abdulstaar MA, Al-Fadhalah KJ, Wagner L. Microstructural variation through weld thickness and mechanical properties of peened friction stir welded 6061 aluminum alloy joints. Mater Charact. 2017;126:64–73.
   Web of Science ®Google Scholar
• Xu W, Liu J, Luan G, et al. Temperature evolution, microstructure and mechanical properties of friction stir welded thick 2219-O aluminum alloy joints. Mater Des. 2009;30(6):1886–1893.
   Web of Science ®Google Scholar
• Buglioni L, Tufaro LN, Svoboda HG. Thermal cycles and residual stresses in FSW of aluminum alloys: experimental measurements and numerical models. Procedia Mater Sci. 2015;9:87–96.
   Google Scholar
• Baghdadi AH, Sajuri Z, Keshtgar A, et al. Mechanical property improvement in dissimilar friction stir welded Al5083/Al6061 joints: effects of post-weld heat treatment and abnormal grain growth. Materials. 2021;15(1):288.
   PubMedGoogle Scholar
• Baghdadi AH, Sajuri Z, Omar MZ, et al. Friction stir welding parameters: impact of abnormal grain growth during post-weld heat treatment on mechanical properties of Al–Mg–Si welded joints. Metals. 2020;10(12):1607–1618.
   Google Scholar
• Selamat NFM, Baghdadi AH, Sajuri Z, et al. Weldability and mechanical properties of dissimilar Al-MgSi to pure aluminium and Al-Mg using friction stir welding process. J Teknol. 2019;81:143–149.
   Google Scholar
• Selamat NFM, Baghdadi AH, Sajuri Z, et al. Rolling effect on dissimilar friction stir welded AA5083-AA6061 aluminium alloy joints. J Adv Manuf Technol. 2020;14:49–62.
   Google Scholar
• Morita T, Sakamoto A, Mabuchi S, et al. Strength and formability of friction stir welded aluminum alloy with cold rolled steel. J Soc Mat Sci Jpn. 2009;58(4):317–322.
   Google Scholar
• Khorrami MS, Kazeminezhad M, Kokabi AH. Thermal stability during annealing of friction stir welded aluminum sheet produced by constrained groove pressing. Mater Des. 2013;45:222–227.
   Google Scholar
• Elangovan K, Balasubramanian V. Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy joints. Mater Charact. 2008;59(9):1168–1177.
   Google Scholar
• Hu Z, Yuan S, Wang X, et al. Effect of post-weld heat treatment on the microstructure and plastic deformation behavior of friction stir welded 2024. Mater Des. 2011;32(10):5055–5060.
   Google Scholar
• Song KH, Nakata K. Effect of precipitation on post-heat-treated inconel 625 alloy after friction stir welding. Mater Des. 2010;31(6):2942–2947.
   Web of Science ®Google Scholar
• Priya R, Subramanya Sarma V, Prasad Rao K. Effect of post weld heat treatment on the microstructure and tensile properties of dissimilar friction stir welded AA 2219 and AA 6061 alloys. Trans Indian Inst Met. 2009;62(1):11–19.
   Web of Science ®Google Scholar
• Ronghong C, Yuting H, Bo J, et al. Fatigue damage monitoring of an aluminum joint specimen. Procedia Eng. 2015;99:1421–1425.
   Google Scholar
• Guirong X, Xuesong G, Yuliang Q, et al. Analysis and innovation for penetrant testing for airplane parts. Procedia Eng. 2015;99:1438–1442.
   Google Scholar
• Sacarea AI, Oancea G, Parv L. Magnetic particle inspection optimization solution within the frame of NDT 4.0. Processes. 2021;9(6):1067.
   Web of Science ®Google Scholar
• Zolfaghari A, Zolfaghari A, Kolahan F. Reliability and sensitivity of magnetic particle nondestructive testing in detecting the surface cracks of welded components. Nondestruct Test Eval. 2018;33(3):290–300.
   Web of Science ®Google Scholar
• Bowler JR, Bowler N. Evaluation of the magnetic field near a crack with application to magnetic particle inspection. J Phys D Appl Phys. 2002;35(18):2237–2242.
   Google Scholar
• Gharsallah MB, Braiek EB. Weld inspection based on radiography image segmentation with level set active contour guided off-Center saliency map. Adv Mater Sci Eng. 2015;2015:871602.
   Google Scholar
• Gao P, Wang C, Li Y, et al. Electromagnetic and eddy current NDT in weld inspection: a review. Insight. 2015;57(6):337–345.
   Google Scholar
• Wang R, Liu Z, Wu J, et al. Research on phased array ultrasonic testing on CFETR vacuum vessel welding. Fusion Eng Des. 2019;139:124–127.
   Google Scholar
• Li B, Shen Y, Hu W. The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods. Mater Des. 2011;32(4):2073–2084.
   Web of Science ®Google Scholar
• Sahu PK, Pal S. Mechanical properties of dissimilar thickness aluminium alloy weld by single/double pass FSW. J Mater Process Technol. 2017;243:442–455.
   Web of Science ®Google Scholar
• Upadhyay P, Reynolds AP. Thermal management in friction-stir welding of precipitation-hardened aluminum alloys. JOM. 2015;67(5):1022–1031.
   Google Scholar
• Derazkola HA, Simchi A. Experimental and thermomechanical analysis of friction stir welding of poly (methyl methacrylate) sheets. Sci Technol Weld Join. 2018;23(3):209–218.
   Google Scholar
• Ivanov SY, Panchenko OV, Mikhailov VG. Comparative analysis of non-uniformity of mechanical properties of welded joints of Al–Mg–Si alloys during friction stir welding and laser welding. Met Sci Heat Treat. 2018;60(5–6):393–398.
   Web of Science ®Google Scholar
• Mosavvar A, Azdast T, Moradian M, et al. Tensile properties of friction stir welding of thermoplastic pipes based on a novel designed mechanism. Weld World. 2019;63(3):691–699.
   Google Scholar
• Niroumand-jadidi A, Kashani-bozorg SF. Microstructure and property assessment of dissimilar joints of 6061-T6 Al/dual-phase steel fabricated by friction stir spot welding. Weld World. 2018;62(4):751–765.
   Google Scholar
• Yang X, Feng W, Li W, et al. Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8. Sci Technol Weld Join. 2018;23(8):704–714.
   Web of Science ®Google Scholar
• Morisada Y, Imaizumi T, Fujii H. Clarification of material flow and defect formation during friction stir welding. Sci Technol Weld Join. 2015;20(2):130–137.
   Web of Science ®Google Scholar
• Rao TS, Rao SRKK, Reddy GM. Microstructure and fracturing behavior of AA7075–T651 aluminum alloy cooled during friction stir welding. Met Sci Heat Treat. 2019;61(5-6):379–386.
   Google Scholar
• Shashi Kumar S, Murugan N, Ramachandran KK. Effect of friction stir welding on mechanical and microstructural properties of AISI 316L stainless steel butt joints. Weld World. 2019;63(1):137–150.
   Google Scholar
• Ghetiya ND, Patel KM. Welding speed effect on joint properties in air and immersed friction stir welding of AA2014. Proc IMechE Part B J Eng Manuf. 2017;231(5):897–909.
   Google Scholar
• Patel N, Bhatt KDD, Mehta V. Influence of tool pin profile and welding parameter on tensile strength of magnesium alloy AZ91 during FSW. Procedia Technol. 2016;23:558–565.
   Google Scholar
• Ghiasvand A, Hassanifard S, Saadi S, et al. Tensile properties and microstructural features of friction stir welded Al 6061 joints fabricated by various dual-pin tool shapes. Sci Technol Weld Join. 2021;26(6):493–502.
   Web of Science ®Google Scholar
• Yang X, Li W, Xu Y, et al. Effect of welding speed on microstructures and mechanical properties of Al/Cu bimetal composite tubes by a novel friction-based welding process. Weld World. 2019;63(1):127–136.
   Google Scholar
• Kumar J, Majumder S, Mondal AK, et al. Influence of rotation speed, transverse speed, and pin length during underwater friction stir welding (UW-FSW) on aluminum AA6063: a novel criterion for parametric control. Int J Light Mater Manuf. 2022;5(3):295–305.
   Google Scholar