References
- Hambrecht T, Alber U. The new Audi Q7. Bad Nauheim: EuroCarBody; 2015.
- Kawai K. Trends of multi-materialization and required technologies in the future. Tokyo: Reed Exhibition Japan Ltd.; 2019.
- Kambe H. Vehicle weight reduction and application of aluminum alloy casting technology. Tokyo: Reed Exhibition Japan Ltd., 2019.
- Barnes TA, Pashby IR. Joining techniques for aluminium spaceframes used in automobiles: part II ̶ adhesive bonding and mechanical fasteners. J Mater Process Technol. 2000;99(1–3):72–79.
- Michalos G, Makris S, Papakostas N, et al. Automotive assembly technologies review: challenges and outlook for a flexible and adaptive approach. CIRP J Manuf Sci Technol. 2010;2(2):81–91.
- Abe Y, Kato T, Mori K. Self-piercing riveting of high tensile strength steel and aluminium alloy sheets using conventional rivet and die. J Mater Process Technol. 2009;209(8):3914–3922.
- Varis JP. The suitability of round clinching tools for high strength structural steel. Thin–Walled Structures. 2002;40(3):225–238.
- Nong N, Keju O, Yu Z, et al. Research on press joining technology for automotive metallic sheets. J Mater Process Technol. 2003;137(1–3):159–163.
- Shoji Y, Takase K, Gendo T, et al. Development of spot friction welding technology of aluminum alloy and steel. Mazda Technical Report 2006. 2006;24.
- Fukada S, Ohashi R, Fujimoto M. Okada:refill friction stir spot welding of dissimilar materials consisting of A6061 and hot dip zinc-coated steel sheets. In Proceedings of the 1st international joint symposium on joining and welding. Amsterdam: Elsevier; 2013. p. 183–187.
- Suhuddin UFH, Fischer V, Kostka A, et al. Microstructure evolution in refill friction stir spot weld of a dissimilar Al-Mg alloy to Zn-coated steel. Sci Technol Weld Joining. 2017;22(8):658–665.
- Dong H, Chen S, Song Y, et al. Refilled friction stir spot welding of aluminum alloy to galvanized steel sheets. Mater Des. 2016;94:457–466.
- Ohashi R. Dissimilar material joining by FSSW. J Japan Weld Soci. 2018;87(1):28–32.
- Takeoka N, Tsuchida T, Matsuda T, et al. Analysis of mechanical properties and interfacial layer – development of a new dissimilar material joining method using refill friction stir spot welding (1st. Prepr Natl Meet JWS. 2021;109:104–105.
- Sun YF, Fujii H, Takaki N, et al. Microstructure and mechanical properties of dissimilar Al alloy/steel joints prepared by a flat spot friction stir welding technique. Mater Des. 2013;47:350–357.
- Wang X, Morisada Y, Fujii H. High-strength Fe/Al dissimilarjoint with uniform nanometer-sized intermetallic compound layerand mechanical interlock formed by adjustable probes during double-sided friction stir spot welding. Mater Sci Engi A. 2021;809:141005.
- Matsuda T, Owada K, Numata A, et al. Influence of interfacial structure on the fracture behavior of friction stir spot welded dissimilar joints. Mater Sci Eng A. 2020;772:138710–138743.
- Kimapong K, Watanabe Lap T. Joint of A5083 aluminum alloy and SS400 steel by friction stir welding. Mater Trans. 2005;46(4):835–841.
- Watanabe M, Ookawa T, Kumai S. Formation of laminate structure at the friction stir weld interface of aluminum alloy/steel lap joint. J Japan Inst Light Metals. 2007;57(11):536–554.
- Movahedi M, Kokabi AH, Reihani SMS, et al. :Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding. Sci Technol Weld Joining. 2012;17(2):162–167.
- Hirose A, Matsui F, Imaeda H, et al. Interfacial reaction and strength of dissimilar joints of aluminum alloys to steels for automobile. MSF. 2005;475–479:349–352.
- Ogura T, Hirose A. Microstructural control of interface and mechanical properties in dissimilar metal joining between aluminum alloy and steel. J Japan Inst Light Metals. 2016;66(9):503–511.