96
Views
0
CrossRef citations to date
0
Altmetric
Translated Articles

Development of analysis method for hot cracking considering mechanical and metallurgical factors

, , &

References

  • Lahaie DJ, Bouchard M. Physical modeling of the deformation mechanisms of semisolid bodies and a mechanical criterion for hot tearing. Metall and Materi Trans B. 2001;32(4):697–705.
  • Novikov II, Grushko OE. Hot cracking susceptibility of Al.Cu.Li and Al.Cu.Li.Mn alloys. Mater Sci Technol. 1995;11(9):926–932.
  • Senda T, Matsuda F, Takano G, et al. Studies on solidification crack susceptibility for weld metals with Trans-Varestraint test (1) -investigation for commercially used constructional metals and alloys. J Jpn Welding Soc. 1972;41(6):709–723. (in Japanese)
  • Rappaz M, Drezet J-M, Gremaud M. A new Hot-Tearing criterion. Metall Mat Trans A. 1999;30(2):449–455.
  • Clyne TW, Davies GJ. Comparison between experimental data and theoretical predictions relating to dependence of solidification cracking on composition. Proceedings of the conference on solidification and casting of metals. London: Metals Society; 1979. p. 274–278.
  • Wen P, Shinozaki K, Yamamoto M, et al. Prediction of solidification cracking by in-situ observation and 3D FEM-analysis. J Jpn Welding Soc. 2009;27(2):139s–143s.
  • He Q, Wei H, Chen J-S, et al. Analysis of hot cracking during lap joint laser welding processes using the melting state-based thermomechanical modeling approach. Int J Adv Manuf Technol. 2018;94(9-12):4373–4386.
  • Harada T, Ikushima K, Shibahara M, et al. Study on solidification cracking under high-speed narrow gap welding with tandem torches. Q J Jpn Welding Soc. 2015;33(2):190s–194s.
  • Wray PJ. Predicted volume change behavior accompanying the solidification of binary alloys. MTB. 1976;7(4):639–646.
  • Yokoyama T, Ueshima Y, Mizukami Y, et al. Effect of Cr, P and Ti on density and solidification shrinkage of iron. Tetsu-to-Hagane. 1997;83(9):557–562. (in Japanese)
  • Coniglio N, Cross CE. Towards establishment of weldability testing standards for solidification cracking. In: Boellinghaus T, Lippold J, Cross C, editors. Cracking Phenomena in Welds IV. Berlin: Springer;2016. p. 37–66.
  • Ikushima K, Shibaha M. Development of analytical method for welding mechanics using idealized explicit FEM. Trans JWRI. 2010;39-2:384–386.
  • Project of Integrity Assessment of Flawed Components with Structural Discontinuity (IAF) Material Properties Data Book at High Temperature for dissimilar metal welding in Reactor Pressure Vessel, Japan Nuclear Energy Saftety Organization. 2013; p. 120–128. (in Japanese)
  • Clyne TW, Wolf M, Kurz W. The effect of melt composition on solidification cracking of steel, with particular reference to continuous casting. MTB. 1982;13(2):259–266.
  • Mizukami H, Hiraki S, Kawamoto M, et al. Tensile strength of carbon steel during and after solidification. Tetsu-to- Hagane. 1998;84(11):763–769. (in Japanese)
  • Mechanical Engineering Handbook B-2-5, B-2-7, Japan Society of Mechanical Engineers. 1984
  • Matsuda F. Hot cracking in welded joints of steels. Sanyo Tech Rep. 1998;5-1:8–19. (in Japanese)
  • Gaumann M, Kurz W. Why is it so difficult to produce an equiaxed microstructure during welding? Math Model Weld Phenomena Conf. 1997;4:125–136.
  • Rong P, Wang N, Wang L, et al. The influence of grain boundary angle on the hot cracking of single crystal superalloy DD6. J Alloys Compd. 2016;676:181–186.
  • Wang N, Mokadem S, Rappaz M, et al. Solidification cracking of superalloy single- and bi-crystals. Acta Mater. 2004;52(11):3173–3182.
  • Mellenthin J, Karma A, Plapp M. Phase-field crystal study of grain-boundary premelting. Phys Rev B. 2008;78(18):184110.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.