Calculation of spatial and temporal distributions of temperature and velocity of a weld pool during laser welding

References

• Mahrle A, Schmidt J. The influence of fluid flow phenomena on the laser beam welding process. Int J Heat Fluid Flow. 2002;23(3):288–297.
   Google Scholar
• He X, Fuerschbach PW, Debroy T. Heat transfer and fluid flow during laser spot welding of 304 stainless steel. J Phys D Appl Phys. 2003;36(12):1388–1398.
   Web of Science ®Google Scholar
• Abderrazak K, Bannour S, Mhiri H, et al. Numerical and experimental study of molten Pool formation during continuous laser welding of AZ91 magnesium alloy. Comput Mater Sci. 2009;44(3):858–866.
   Google Scholar
• Wang H, Shi Y, Gong S. Effect of pressure gradient driven convection in the molten Pool during the deep penetration laser welding. J Mater Process Technol. 2007;184(1–3):386–392.
   Google Scholar
• Bag S, Trivedi A, De A. Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source. Int J Therm Sci. 2009;48(10):1923–1931.
   Web of Science ®Google Scholar
• Hu Y, He X, Yu G, et al. Heat and mass transfer in laser dissimilar welding of stainless steel and nickel. Appl Surf Sci. 2012;258(15):5914–5922.
   Google Scholar
• Halim S, Bannour S, Abderrazak K, et al. Numerical analysis of intermetallic compounds formed during laser welding of aluminum-magnesium dissimilar couple. Therm Sci Eng Prog. 2021;22:100838.
   Google Scholar
• Xie X, Zhou J, Long J. Numerical study on molten pool dynamics and solute distribution in laser deep penetration welding of steel and aluminum. Opt Laser Technol. 2021;140:107085.
   Google Scholar
• Grigoryants AG, Misyurov AI, Tretyakov RS, et al. A device for removing metal from the weld pool when studying the shape of the weld pool. Weld Int. 2016;69(12):35–38.
   Google Scholar
• Grigoryants AG, Grezev VA. Special features of laser welding using fibre and CO2 lasers. Weld Int. 2014;67(12):17–24.
   Google Scholar
• Abderrazak K, Ben Salem W, Mhiri H, et al. Nd:YAG laser welding of AZ91 magnesium alloy for aerospace industries. Metall Mater Trans B. 2009;40(1):54–61.
   Google Scholar
• Nedjar B. An enthalpy-based finite element method for nonlinear heat problems involving phase change. Comput Struct. 2002;80(1):9–21.
   Web of Science ®Google Scholar
• Berger P, Hügel H. Fluid dynamic effects in keyhole welding an attempt to characterize different regimes. Phys Proc. 2013;41:216–224.
   Google Scholar
• Lee HT, Chen C, Wu JL. Numerical and experimental investigation into effect of temperature field on sensitization of alloy 690 butt welds fabricated by gas tungsten arc welding and laser beam welding. J Mater Process Technol. 2010;210(12):1636–1645.
   Google Scholar
• Tirand G, Arvieu C, Lacoste E, et al. Control of aluminium laser welding conditions with the help of numerical modeling. J Mater Process Technol. 2013;213(3):337–348.
   Web of Science ®Google Scholar
• Ronda J, Silwek A. Modelling of laser welding process in the phase of keyhole formation. Arch Civil Mech Eng. 2011;11(3):739–752.
   Google Scholar
• Otto A, Koch H, Gomez Vazquez R. Multiphysical simulation of laser material processing. Phys Proc. 2012;39:843–852.
   Google Scholar
• Lemkeddem S, Khelfaoui F, Babahani O. Calculation of energy lost by radiation and convection during laser welding of TA6V titanium alloy. J Theor Appl Phys. 2018;12(2):113–120.
   Google Scholar
• Aghaee Attar M, Ghoreishi M, Malekshahi Beiranvand Z. Prediction of weld geometry, temperature contour and strain distribution in disk laser welding of dissimilar joining between copper & 304 stainless steel. Optik. 2020;219:165288.
   Google Scholar
• Li Z, Rostam K, Panjehpour A, et al. Experimental and numerical study of temperature field and molten pool dimensions in dissimilar thickness laser welding of Ti6Al4V alloy. J Manuf Process. 2020;49:438–446.
   Web of Science ®Google Scholar
• Anca A, Cardona A, Risso J, et al. Finite element modeling of welding processes. Appl Math Modell. 2011;35(2):688–707.
   Web of Science ®Google Scholar
• Piekarska W, Kubiak M. Modeling of thermal phenomena in single laser beam and laser-arc hybrid welding processes using projection method. Appl Math Modell. 2013;37(4):2051–2062.
   Google Scholar
• Vanhille C, Lavie A, Campos-Pozuelo C. Modélisation numérique en mécanique. Paris: Lavoisier; 2007.
   Google Scholar
• Bannour S, Abderrazak K, Mhiri H, et al. Effects of temperature-dependent material properties and shielding gas on molten pool formation during continuous laser welding of AZ91 magnesium alloy. Opt Laser Technol. 2012;44(8):2459–2468.
   Web of Science ®Google Scholar
• Bennon WD, Incropera FP. A continuum model for momentum, heat and species transport in binary solid–liquid phase change systems-I model formulation. Int J Heat Mass Transfer. 1987;30(10):2161–2170.
   Web of Science ®Google Scholar
• Fan HG, Tsai HL, Na SJ. Heat transfer and fluid flow in a partially or fully penetrated weld pool in gas tungsten arc welding. Int J Heat Mass Transf. 2001;44(2):417–428.
   Google Scholar
• Patankar SV. Numerical heat transfer and fluid flow. Washington; New York; London: McGraw-Hill Book Company; 1980.
   Google Scholar