Advanced search
Publication Cover
Welding International Volume 36, 2022 - Issue 7
Submit an article Journal homepage
283
Views
2
CrossRef citations to date
0
Altmetric
Research Articles

Optimization of MIG welding process parameters with grey relational analysis for AL 6061 alloy

Sameer S. Kulkarnia Mechanical Engineering Department, BLDEA's VP Dr. PGH College of Engineering and Tech, Vijayapur, IndiaCorrespondence[email protected]
,
Virupakshappa S. Konnura Mechanical Engineering Department, BLDEA's VP Dr. PGH College of Engineering and Tech, Vijayapur, India
&
Jagadeesh P. Ganjigattib Industrial Engineering and Management, Siddaganga Institute of Technology, Tumkur, India
Pages 387-393 | Received 08 Feb 2022, Accepted 05 Jun 2022, Published online: 20 Jun 2022

References

  • Zhang YM, Zhang SN. Welding aluminum alloy 6061 with the opposing dual torch GTAW process. Weld Res Suppl. 1999;78:1–16.
  • Zhang YM, Pan C, Male AT. Improved microstructure and properties of 6061 aluminum alloy weldments using a double sided arc welding process. Metall Mater Trans A. 2000;31:2537–2543.
  • Anjaneya Prasad B, Prasanna P. Experimental comparison of the MIG and friction stir welding processes for AA6061 (Al Mg Si Cu) aluminium alloy. In: ICMME'13; 2013. p. 102–105.
  • Khalid Abbasi SA, Khan MI. An experimental study on the effect of MIG welding parameters on the weld-bead shape characteristics. RACST Eng Sci Technol. 2012;2(4):599–602.
  • Linga Raju D, Raju N. Effect of using a rotating electrode in metal arc weld bead characteristics of aluminum alloy 6061-T6 weldments. In: Proceedings of the World Congress on Engineering, Vol. 2; 2016 Jun 29–Jul 1; London, UK.
  • Ali Akbari E, Baseri H. Optimization of machining parameters in rotary EDM process by using the Taguchi method. Int J Adv Manuf Technol. 2012;62(9–12):1041–1053.
  • Vijian P, Arunachalam VP. Optimization of squeeze casting process parameters using Taguchi analysis. Int J Adv Manuf Technol. 2007;33:112–1127.
  • Singh LM, Saha A. Optimization of welding parameters for maximization of weld bead widths for submerged arc welding of mild steel plates. Int J Eng Res Technol. 2012;1(4):1–5.
  • Senthil Kumar G, Natarajan U, Veerarajan T, et al. Quality level assessment for imperfections in GMAW. Weld J. 2014;93:85s-97s.
  • Kumar D, Jindal S. Optimization of process parameters of gas metal ARC welding by Taguchi’s experimental design method. Int J Surf Eng Mater Technol. 2014;4(1):24–27.
  • Chauhan V, Jadoun RS. Parametric optimization of MIG welding for stainless steel (SS-304) and low carbon steel using Taguchi design method. Int J Adv Technol Eng Res. 2015;6:2662–2666.
  • Natrayan L, Anand R, Santhosh Kumar S. Optimization of process parameters in TIG welding of AISI 4140 stainless steel using Taguchi technique. Mater Today Proc. 2021;37(2):1550–1553.
  • Kulkarni SS. Modeling and analysis of effect of Welding parameter on the bead geometry and properties of aluminium alloy 6061 [Thesis].2020.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.