References
- Williams SW, Martina F, Addison AC, et al. Wire + arc additive manufacturing. Mater Sci Technol. 2016;32(7):641–647.
- Ding D, Pan Z, Cuiuri D, et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol. 2015;81(1–4):465–481.
- Buchanan C, Gardner L. Metal 3D printing in construction: a review of methods, research, applications, opportunities and challenges. Eng Struct. 2019;180:332–348.
- Chen XH, Li J, Cheng X, et al. Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing. Mater Sci Eng A. 2017;703:567–577.
- Yang D, He C, Zhang G. Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturing. J Mater Proc Technol. 2016;227:153–160.
- Xiong J, Li Y, Li R, et al. Influences of process parameters on surface roughness of multi-layer single- pass thin-walled parts in GMAW-based additive manufacturing. J Mater Proc Technol. 2018;252:128–136.
- Sridharan N, Noakes MW, Nycz A, et al. On the toughness scatter in low alloy C-Mn steel samples fabricated using wire arc additive manufacturing. Mater Sci Eng A. 2018;713:18–27.
- Wilson-Heid AE, Wang Z, McCornac B, et al. Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V. Mater Sci Eng A. 2017;706:287–294.
- Wang T, Zhang Y, Wu Z, et al. Microstructure and properties of die steel fabricated by WAAM using H13 wire. Vaccum. 2018;149:185–189.
- Derekar K, Lawrence J, Melton J, et al. Influence of interpass temperature on wire arc additive manufacturing (WAAM) of aluminium alloy components. MATEC Web Conf. 2019;269:05001.
- Caballero A, Ding J, Ganguly S, et al. Wire + arc additive manufacture of 17- 4 PH stainless steel: effect of different processing conditions on microstructure, hardness, and tensile strength. J Mater Proc Technol. 2019;268:54–62.
- DeRuntz BD. Assessing the benefits of surface tension transfer welding to industry. J Ind Technol. 2003;19:55–62.
- Prasanna Nagasai B, Malarvizhi S, Balasubramanian V. Mechanical properties and microstructural characteristics of AA5356 aluminum alloy cylindrical components made by wire arc additive manufacturing process. Mater Perform Charac. 2022;11:1–26.
- Aldalur E, Veiga F, Suarez A, et al. Higher deposition wire arc additive manufacturing of mild steel: strategies and heat input effect on microstructure and mechanical properties. J Manuf Process. 2020;58:615–626.
- Ermakovaa A, Mehmanparasta A, Ganguly S, et al. Investigation of mechanical and fracture properties of wire and arc additively manufactured low carbon steel components. Theor Appl Fract Mech. 2020;109:1–9.
- Suryakumar S, Karunakaran KP, Chandrasekhar U, et al. A study of the mechanical properties of objects built through weld-deposition. Proc Inst Mech Eng B. 2013;227(8):1138–1147.
- Xin H, Tarus L, Cheng L, et al. Experiments and numerical simulation of wire and arc additive manufactured steel materials. Structures. 2021;34:1393–1402.
- Sun L, Jiang F, Huang R, et al. Microstructure and mechanical properties of low-carbon high-strength steel fabricated by wire and arc additive manufacturing. Metals. 2020;10(2):216.
- Mehran R, Mahya G, Alireza VN, et al. Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing. Int J Adv Manuf Technol. 2019;105:1–14.
- Liberini M, Astarita A, Campatelli G, et al. Selection of optimal process parameters for wire arc additive manufacturing. Procedia CIRP. 2017;62:470–474.
- Le TV, Mai DS, Hoang QH. A study on wire and arc additive manufacturing of low-carbon steel components: process stability, microstructural and mechanical properties. J Braz Soc Mech Soc Eng. 2020;42:480.
- Haden CV, Zeng G, Carter FM, et al. Wire and arc additive manufactured steel: tensile and wear properties. Addit Manuf. 2017;16:115–123.
- Ramaswamy A, Malarvizhi S, Balasubramanian V. Effect of variants of gas metal arc welding process on tensile properties of AA6061-T6 aluminum alloy joints. Int J Adv Manuf Technol. 2020;108(9–10):2967–2983.