Effect of different interlayer on Al 5052/SS 316 explosive cladding

References

• Dwivedi SP, Sahu R, Saxena A, et al. Recovery of Cr from chrome-containing leather waste and its utilization as reinforcement along with waste spent alumina catalyst and grinding sludge in AA 5052-based metal matrix composites. Proc Inst Mech Eng E 2022;236(1):160–170.
   Web of Science ®Google Scholar
• Wallerstein D, Salminen A, Lusquiños F, et al. Recent developments in laser welding of aluminum alloys to steel. Metals. 2021;11(4):622.
   Web of Science ®Google Scholar
• Saravanan S, Gajalakshmi K. Soft computing approaches for comparative prediction of ram tensile and shear strength in aluminium–stainless steel explosive cladding. Arch Civ Mech Eng. 2022;22(1):1–6.
   Web of Science ®Google Scholar
• Zhao H, Sheng L. Microstructure and mechanical properties of the Ag/316L composite plate fabricated by explosive welding. J Manuf Process. 2021;64:265–275.
   Web of Science ®Google Scholar
• Wu X, Shi C, Feng K, et al. Experimental and numerical approach to titanium-aluminum explosive welding. Mater Res Express. 2021;8(9):096503.
   Web of Science ®Google Scholar
• Sherpa BB, Kumar PD, Upadhyay A, et al. Effect of explosive welding parameters on Al/LCS interface cladded by low velocity of detonation explosive welding (LVEW) process. Int J Adv Manuf Technol. 2021;113(11-12):3303–3317.
   Web of Science ®Google Scholar
• Chen X, Inao D, Tanaka S, et al. Explosive welding of Al alloys and high strength duplex stainless steel by controlling energetic conditions. J Manuf Process. 2020;58:1318–1333.
   Web of Science ®Google Scholar
• Chu Q, Xia T, Zhao P, et al. Interfacial investigation of explosion-welded Al/steel plate: the microstructure, mechanical properties and residual stresses. Mater Sci Eng A. 2022;833:142525.
   Web of Science ®Google Scholar
• Kumar CW, Saravanan S, Raghukandan K. Numerical and experimental investigation on aluminum 6061-V-grooved stainless steel 304 explosive cladding. Def Technol. 2022;18(2):249–260.
   Web of Science ®Google Scholar
• Saravanan S, Raghukandan K. Microstructure and mechanical strength predictive modeling in Al 5052-trapezoidal grooved SS 304 explosive cladding. J Wuhan Univ Technol-Mat Sci Edit. 2020;35(5):958–966.
   Web of Science ®Google Scholar
• H. S. F. L. Carvalho G, Galvão I, Mendes R, et al. Aluminum-to-steel cladding by explosive welding. Metals. 2020;10(8):1062.
   Web of Science ®Google Scholar
• Chen X, Li X, Inao D, et al. Study of explosive welding of A6061/SUS821L1 using interlayers with different thicknesses and the air shockwave between plates. Int J Adv Manuf Technol. 2021;116(11-12):3779–3794.
   Web of Science ®Google Scholar
• Elango E, Saravanan S, Raghukandan K. Experimental and numerical studies on aluminum-stainless steel explosive cladding. J Cent South Univ. 2020;27(6):1742–1753.
   Web of Science ®Google Scholar
• Wu X, Shi C, Fang Z, et al. Comparative study on welding energy and interface characteristics of titanium-aluminum explosive composites with and without interlayer. Mater Des. 2021;197:109279.
   Web of Science ®Google Scholar
• Miao Y, Chen X, Wang H. Some applications of interlayer explosive welding. Compos Interfaces. 2022;29(4):345–360.
   Web of Science ®Google Scholar
• Lysak VI, Kuzmin SV. Energy balance during explosive welding. J Mater Process Technol. 2015;222:356–364.
   Web of Science ®Google Scholar
• Saravanan S, Raghukandan K. Microstructure, strength and welding window of aluminum alloy − stainless steel explosive cladding with different interlayers. Trans Nonferrous Met Soc China. 2022;32(1):91–103.
   Web of Science ®Google Scholar
• Pushkin MS, Greenberg BA, Ivanov MA, et al. Microstructure of joints Cu–ta, cu–Ti, Cu–Cu, produced by means of explosive welding: fractal description of interface relief. Compos Interfaces. 2021;28(1):63–76.
   Web of Science ®Google Scholar
• Carvalho GH, Galvão I, Mendes R, et al. Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers. J Mater Process Technol. 2020;283:116707.
   Web of Science ®Google Scholar
• Chu Q, Zhang M, Li J, et al. Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding. Mater Sci Eng A. 2017;689:323–331.
   Web of Science ®Google Scholar
• Inao D, Mori A, Tanaka S, et al. Explosive welding of thin aluminum plate onto magnesium alloy plate using a gelatin layer as a pressure-transmitting medium. Metals. 2020;10(1):106.
   Web of Science ®Google Scholar
• Yang M, Xu J, Ma H, et al. Microstructure development during explosive welding of metal foil: morphologies, mechanical behaviors and mechanisms. Compos B: Eng. 2021;212:108685.
   Web of Science ®Google Scholar
• Gladkovsky SV, Kuteneva SV, Sergeev SN. Microstructure and mechanical properties of sandwich copper/steel composites produced by explosive welding. Mater Charact. 2019;154:294–303.
   Web of Science ®Google Scholar
• Somasundaram S, Krishnamurthy R, Kazuyuki H. Effect of process parameters on microstructural and mechanical properties of Ti − SS 304L explosive cladding. J Cent South Univ. 2017;24(6):1245–1251.
   Web of Science ®Google Scholar
• Shiran MK, Khalaj G, Pouraliakbar H, et al. Multilayer Cu/Al/Cu explosive welded joints: characterizing heat treatment effect on the interface microstructure and mechanical properties. J Manuf Process. 2018;35:657–663.
   Web of Science ®Google Scholar
• Saravanan S, Inokawa H, Tomoshige R, et al. Microstructural characterization of silicon carbide reinforced dissimilar grade aluminium explosive clads. Def Technol. 2020;16(3):689–694.
   Web of Science ®Google Scholar
• Mali VI, Bataev AA, Maliutina IN, et al. Microstructure and mechanical properties of Ti/ta/Cu/Ni alloy laminate composite materials produced by explosive welding. Int J Adv Manuf Technol. 2017;93(9-12):4285–4294.
   Web of Science ®Google Scholar
• Robin LG, Raghukandan K, Saravanan S. Studies on wire-mesh and silicon carbide particle reinforcements in explosive cladding of Al 1100-Al 5052 sheets. J Manuf Process. 2020;56:887–897.
   Web of Science ®Google Scholar
• Fang Z, Shi C, Sun Z, et al. Influence of interlayer technique on microstructure and mechanical properties of Ti/Al cladding plate manufactured via explosive welding. Mater Res Express. 2019;6(10):1065f9.
   Web of Science ®Google Scholar
• Zhou Q, Jia B, Guo B, et al. Microstructure and mechanical properties of the bonding interface of explosively welded TA2/Q235 composite under dynamic shear loading. Int J Mech Sci. 2022;225:107362.
   Web of Science ®Google Scholar