Study of joining copper-mild steel using microwave energy

References

• Martinsen K, Hu SJ, Carlson BE. Joining of dissimilar materials. CIRP Ann. 2015;64(2):679–699.
   Web of Science ®Google Scholar
• Kah P, Shrestha M, Martikainen J. Trends in joining dissimilar metals by welding. AMM. 2013;440:269–276.
   Google Scholar
• Rowcliffe A, Zinkle S, Stubbins J, et al. Austenitic stainless steels and high strength copper alloys for fusion components. J. Nucl. Mater. 1998;58:183–192.
   Google Scholar
• Shiri SG, Nazarzadeh M, Sharifitabar M, et al. Gas tungsten arc welding of CP-copper to 304 stainless steel using different filler materials. Transactions of Nonferrous Metals Society of China. 2012;22(12):2937–2942.
   Web of Science ®Google Scholar
• Magnabosco I, Ferro P, Bonollo F, et al. An investigation of fusion zone microstructures in electron beam welding of copper–stainless steel. Mater. Sci. Eng., A. 2006;424(1-2):163–173.
   Web of Science ®Google Scholar
• Sun Z, Karppi R. The application of electron beam welding for the joining of dissimilar metals: an overview. J. Mater. Process. Technol. 1996;59(3):257–267.
   Web of Science ®Google Scholar
• Chen S, Huang J, Xia J, et al. Microstructural characteristics of a stainless steel/copper dissimilar joint made by laser welding. Metall and Mat Trans A. 2013;44(8):3690–3696.
   Google Scholar
• Roy C, Pavanan VV, Vishnu G, et al. Characterization of metallurgical and mechanical properties of commercially pure copper and AISI 304 dissimilar weldments. Procedia Materials Sci. 2014;5:2503–2512.
   Google Scholar
• Durgutlu A, Gulenc B, Findik F. Examination of copper/stainless steel joints formed by explosive welding. Mater. Des. 2005;26(6):497–507.
   Web of Science ®Google Scholar
• Imani Y, Givi MKB, Guillot M. Improving friction stir welding between copper and 304L stainless steel. AMR. 2011;409:263–268.
   Google Scholar
• Munitz A. Metastable liquid phase separation in tungsten inert gas and electron beam copper/stainless-steel welds. J Mater Sci. 1995;30(11):2901–2910.
   Web of Science ®Google Scholar
• Vyas HD, Mehta KP, Badheka V, et al. Friction welding of dissimilar joints copper-stainless steel pipe consist of 0.06 wall thickness to pipe diameter ratio. J Manuf Processes. 2021;68:1176–1190.
   Web of Science ®Google Scholar
• Jane B, Nigel BC. Health and safety in welding and allied processes. 5th ed. USA: Woodhead Publishing; 2002. Chapter 6, Control of Exposure to Fume, Dust, Vapour and Gases; p. 51–66.
   Google Scholar
• Golbabaei F, Khadem M. Current air quality issues. London: InTech; 2015. Chapter 2, air pollution in Welding - Assessment and control methods; p. 33–63.
   Google Scholar
• Asai S. Recent development and prospect of electromagnetic processing of materials. Sci Technol Adv Mater. 2000;1(4):191–200.
   Web of Science ®Google Scholar
• Siores E, Do Rego D. Microwave applications in materials joining. J Mater Process Techno. 1995;48(1-4):619–625.
   Web of Science ®Google Scholar
• Clark DE, Sutton WH, Lewis D. Microwave processing of materials. Annu Rev Mater Sci. 1996;26(1):299–331.
   Web of Science ®Google Scholar
• Sutton WH. Microwave processing of ceramic materials. Am. Ceram. Soc. Bull. 1989;168:376–386.
   Google Scholar
• Osepchuk JM. A history of microwave heating applications. IEEE Trans Microwave Theory Techn. 1984;32(9):1200–1224.
   Web of Science ®Google Scholar
• Thostenson ET, Chou TW. Microwave processing fundamentals and applications. Compos Part A. 1999;30(9):1055–1071.
   Web of Science ®Google Scholar
• Ahmed A, Siores E. Microwave joining of 48% alumina–32% zirconia–20% silica ceramics. J. Mater. Process. Technol. 2001;118(1-3):88–94.
   Web of Science ®Google Scholar
• Kathirgamanathan P. Microwave welding of thermoplastics using inherently conducting polymer. Polymer. 1993;34(14):3105–3106.
   Web of Science ®Google Scholar
• Aravindan S, Krishnamurthy R. Joining of ceramic composites by microwave heating. Mater. Lett. 1999;38(4):245–249.
   Web of Science ®Google Scholar
• Sharma AK, Krishnamurthy R. Microwave processing of sprayed alumina composite for enhanced performance. J. Eur. Ceram. Soc. 2002;22(16):2849–2860.
   Web of Science ®Google Scholar
• Roy R, Agrawal DK, Cheng J, et al. Full sintering of powdered metal bodies in a microwave field. Nature. 1999;399(6737):668–670.
   Web of Science ®Google Scholar
• Sethi G, Upadhyaya A, Agrawal D. Microwave and conventional sintering of pre-mixed and prealloyed cu-12sn bronze. Sci Sintering. 2003;35(2):49–65.
   Web of Science ®Google Scholar
• Leonelli C, Veronesi P, Denti L, et al. Microwave assisted sintering of green metal parts. J. Mater. Process. Technol. 2008;205(1-3):489–496.
   Web of Science ®Google Scholar
• Anklekar RM, Agrawal DK, Roy R. Microwave sintering and mechanical properties of P/M steel. Powder Metall. 2001;44(4):355–362.
   Web of Science ®Google Scholar
• Mondal A, Shukla A, Upadhyaya A, et al. Effect of porosity and particle size on microwave heating of copper. Sci Sintering. 2010;42(2):169–182.
   Web of Science ®Google Scholar
• Chandrasekaran S, Ramanathan S, Basak T. Microwave material processing—a review. AIChE J. 2012;58(2):330–363.
   Web of Science ®Google Scholar
• Srinath MS, Sharma AK, Kumar P. Investigation on microstructural and mechanical properties of microwave processed dissimilar joints. J. Manuf. Process. 2011;13(2):141–146.
   Google Scholar
• Srinath MS, Sharma AK, Kumar P. A novel route for joining of austenitic stainless steel (SS-316) using microwave energy. Proc Inst Mech Eng B J Eng Manuf. 2011;225(7):1083–1091.
   Google Scholar
• Srinath MS, Sharma AK, Kumar P. A new approach to joining of bulk copper using microwave energy. Mater. Des. 2011;32(5):2685–2694.
   Web of Science ®Google Scholar
• Bansal A, Sharma AK, Kumar P, et al. Joining of mild steel plates using microwave energy. AMR. 2012;585:465–469.
   Google Scholar
• Bansal A, Sharma AK, Das S. Metallurgical and mechanical characterization of mild steel –mild steel joint formed by microwave hybrid heating process. Sadhana. 2013;38(4):679–686.
   Web of Science ®Google Scholar
• Dwivedi PS, Sharma S. Effect of process parameters on tensile strength of 1018 mild steel joints fabricated by microwave welding. Metallogr Microstruct Anal. 2014;3(1):58–69.
   Google Scholar
• Singh S, Suri NM, Belokar RM. Characterization of joint developed by fusion of aluminum metal powder through microwave hybrid heating. Mater. Today: proc. 2015;2(4-5):1340–1346.
   Google Scholar
• Singh S, Singh P, Gupta D, et al. Development and characterization of microwave processed cast iron joint. Eng. Sci. Tech. Int. J. 2019;2:569–577.
   Google Scholar
• Chang C-C, Wu L-H, Shueh C, et al. Evaluation of microstructure and mechanical properties of dissimilar welding of copper alloy and stainless steel. Int J Adv Manuf Technol. 2017;91(5-8):2217–2224.
   Web of Science ®Google Scholar
• Liu P, Bao J, Bao Y. Mechanical properties and fracture behavior of an EBW T2 copper–45 steel joint. Materials. 2019;12(10):1714.
   PubMed Web of Science ®Google Scholar
• Akinlabi ET. Characterisation of dissimilar friction stir welds between 5754 aluminium alloy and C11000 copper [dissertation]. Nelson Mandela Metropolitan University; 2010.
   Google Scholar
• Moharana BR, Sahu SK, Sahoo SK, et al. Experimental investigation on mechanical and microstructural properties of AISI 304 to Cu joints by CO2 laser. Int. J. Eng. Sci. Technol. 2016;19:684–690.
   Google Scholar