193
Views
5
CrossRef citations to date
0
Altmetric
Research Articles

Modeling and optimization of tool parameters in friction stir lap joining of aluminum using RSM and NSGA II

&
Pages 21-33 | Received 01 Nov 2022, Accepted 28 Dec 2022, Published online: 11 Jan 2023

References

  • Akbari M, Asadi P. Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing. Proc IMechE Part E. 2021;235(6):2165–2179.
  • Rabe P, Schiebahn A, Reisgen U. Deep learning approaches for force feedback based void defect detection in friction stir welding. J Adv Join Process. 2022;5:100087.
  • Yaknesh S, Sampathkumar K, Sevvel P, et al. Generation of force and torque during joining of AZ91C plates by FSW under distinctive tool tilt angle and their impact on mechanical strength and micro-structure. J Adhes Sci Technol. 2022;1–20.
  • López EAT, Ramirez AJ. Effect of process parameters in obtaining aluminium–steel joints and their microstructure by friction stir welding (FSW). Weld Int. 2015;29(9):689–697.
  • R C, A A, A S, et al. Prediction of relationship between angular velocity to the pitch line velocity (ω/v) on tensile strength of friction stir welded AA2014-T6 aluminium alloy joints: angular velocity to pitch line velocity ratio on FSW joints. Forces in Mechanics. 2021;4:100036.
  • Rajendran C, Kumar MV, Sonar T, et al. Investigating the effect of PWHT on microstructural features and fatigue crack growth behavior of friction stir welded AA2024-T6 aluminum alloy joints. Forces in Mechanics. 2022;8:100107.
  • Asadi P, Mirzaei M, Akbari M. Modeling of pin shape effects in bobbin tool FSW. Int J Lightweight Mater. 2022;5(2):162–177.
  • Akbari M, Asadi P. Dissimilar friction stir lap welding of aluminum to brass: modeling of material mixing using coupled Eulerian–Lagrangian method with experimental verifications. Proc IMechE Part L. 2020;234(8):1117–1128.
  • Asadi P, Akbari M, Karimi-Nemch H. 12 – Simulation of friction stir welding and processing. In: Givi MKB, Asadi P, editors. Advances in friction-stir welding and processing. Cambridge: Woodhead Publishing; 2014. p. 499–542.
  • Bonome EC, Carletti CB, De Alcantara NG, et al. Friction stir welding – FSW applied to tailored blanks. Weld Int. 2007;21(4):279–283.
  • Lu X, Luan Y, Meng X, et al. Temperature distribution and mechanical properties of FSW medium thickness aluminum alloy 2219. Int J Adv Manuf Technol. 2022;119(11-12):7229–7241.
  • Anandan B, Manikandan M. Machine learning approach for predicting the peak temperature of dissimilar AA7050-AA2014A friction stir welding butt joint using various regression models. Mater Lett. 2022;325:132879.
  • Pietras A, Zadroga L, Lomozik M. Characteristics of welds formed by pressure welding incorporating stirring of the weld material (FSW). Weld Int. 2004;18(1):5–10.
  • D’Orazio A, Forcellese A, Simoncini M. Prediction of the vertical force during FSW of AZ31 magnesium alloy sheets using an artificial neural network-based model. Neural Comput Appl. 2019;31(11):7211–7226.
  • Khan NZ, Bajaj D, Siddiquee AN, et al. Investigation on effect of strain rate and heat generation on traverse force in FSW of dissimilar aerospace grade aluminium alloys. Materials. 2019;12(10):1641.
  • Su H, Wu C. Determination of the traverse force in friction stir welding with different tool pin profiles. Sci Technol Weld Join. 2019;24(3):209–217.
  • Morisada Y, Fujii H, Kanda K, et al. Evaluation of friction stir welding tool using wettability. Weld Int. 2018;32(7):469–474.
  • Takai H, Ezumi M, Aota K, et al. Basic study of friction stir welding tool life-investigation for increase of FSW reliability. Weld Int. 2007;21(9):621–625.
  • Akbari M, Asadi P, Besharati Givi MK, et al. 13 – Artificial neural network and optimization. In: Givi MKB, Asadi P, editors. Advances in friction-stir welding and processing. Cambridge: Woodhead Publishing; 2014. p. 543–599.
  • Suhin S, Robin Divahar S, Edwin Raja Dhas J, et al. Optimizing FSW process parameters using RSM and regression analysis for similar and dissimilar aluminium materials. Mater Today. 2022;64:368–373.
  • Kalil Rahiman M, Santhoshkumar S, Mythili S, et al. Experimental analysis of friction stir welded of dissimilar aluminium 6061 and titanium TC4 alloys using response surface methodology (RSM). Mater Today. 2022;66:1016–1022.
  • Ruskin Bruce A, Prem Kumar P, Arul K, et al. Experimental characteristics and optimization of friction stir welded AA5052-AA6061 using RSM technique. Mater Today. 2022;59:1379–1387.
  • Chabbi A, Yallese MA, Nouioua M, et al. Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods. Int J Adv Manuf Technol. 2017;91(5–8):2267–2290.
  • Ahmadi S, Mesbah M, Igwegbe CA, et al. Sono electro-chemical synthesis of LaFeO3 nanoparticles for the removal of fluoride: optimization and modeling using RSM, ANN and GA tools. J Environ Chem Eng. 2021;9(4):105320.
  • Onu CE, Nwabanne JT, Ohale PE, et al. Comparative analysis of RSM, ANN and ANFIS and the mechanistic modeling in eriochrome black-T dye adsorption using modified clay. S Afr J Chem Eng. 2021;36:24–42.
  • Venkata Rao K, Murthy P. Modeling and optimization of tool vibration and surface roughness in boring of steel using RSM, ANN and SVM. J Intel Manuf. 2018;29(7):1533–1543.
  • Zolghadr P, Akbari M, Asadi P. Formation of thermo-mechanically affected zone in friction stir welding. Mater Res Express. 2019;6(8):086558.
  • Shojaeefard M, Akbari M, Asadi P. Multi objective optimization of friction stir welding parameters using FEM and neural network. Int J Precis Eng Manuf. 2014;15(11):2351–2356.
  • Marzbanrad J, Akbari M, Asadi P, et al. Characterization of the influence of tool pin profile on microstructural and mechanical properties of friction stir welding. Metall and Materi Trans B. 2014;45(5):1887–1894.
  • Akbari M, Asadi P. Effects of different cooling conditions on friction stir processing of A356 alloy: numerical modeling and experiment. Proc IMechE Part C. 2022;236(8):4133–4146.
  • Akbari M, Asadi P, Behnagh RA. Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method. Int J Adv Manuf Technol. 2021;113(3–4):721–734.
  • Vijayavel P, Balasubramanian V, Sundaram S. Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength and ductility of friction stir processed LM25AA-5% SiCp metal matrix composites. Mater. Des. 2014;57:1–9.
  • de Moura MVF, Marques LS, Barbosa BHG, et al. Multiobjective genetic algorithm applied to inverse finite element analysis: t-joint welding case study. Weld Int. 2021;35(7–9):269–280.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.