Microstructural and wear properties of mild steel cladded with AISI 316L stainless steel using pulsed current gas metal arc welding process

References

• Ishida T. Formation of stainless steel layer on mild steel by welding arc cladding. J Mater Sci. 1991;26(23):6431–6435.
   Web of Science ®Google Scholar
• Khara B, Mandal ND, Sarkar A, et al. Weld cladding with austenitic stainless steel for imparting corrosion resistance. Int Weld J. 2016;49(1):74–81.
   Google Scholar
• La Barbera A, Mignone A, Tosto S, et al. Electron beam cladding and alloying of AISI 316 on plain carbon steel: microstructure and electrochemical corrosion behaviour. Sur coat Tech. 1991;46(3):317–329.
   Web of Science ®Google Scholar
• Srivastava S, Garg RK. Process parameter optimization of gas metal arc welding on is: 2062 mild steel using response surface methodology. J Manu Proc. 2017;25:296–305.
   Web of Science ®Google Scholar
• Kumar NP, Shanmugam NS. Some studies on nickel based Inconel 625 hard overlays on AISI 316L plate by gas metal arc welding based hardfacing process. Wear. 2020;456:1010.
   Web of Science ®Google Scholar
• Dhib Z, Guermazi N, Gaspérini M, et al. Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: microstructure and mechanical properties before and after welding. Mater Sci Eng. 2016;656:130–141.
   Google Scholar
• Arunkumar M, Kumar PA, Sampreeth S, et al. Study of dual pulse gas metal arc welding process characteristics on is 2062 steel. Mater Today Proc. 2022;72:1–18.
   Google Scholar
• Murugan N, Parmar RS. Stainless steel cladding deposited by automatic gas metal arc welding. Weld J. 1997;76:391–399.
   Web of Science ®Google Scholar
• Frei J, Alexandrov BT, Rethmeier M. Low heat input gas metal arc welding for dissimilar metal weld overlays part II: the transition zone. Weld World. 2018;62(2):317–324.
   Web of Science ®Google Scholar
• Pal K, Pal SK. Effect of pulse parameters on weld quality in pulsed gas metal arc welding: a review. J Mater Eng Perform. 2011;20(6):918–931.
   Web of Science ®Google Scholar
• Kah P, Suoranta R, Martikainen J. Advanced gas metal arc welding processes. Int J Adv Manuf Technol. 2013;67(1–4):655–674.
   Web of Science ®Google Scholar
• Kim YS, Eagar TW. Metal transfer in pulsed current gas metal arc welding. Weld J. 1993;72:279–287.
   Web of Science ®Google Scholar
• Praveen P, Yarlagadda PKDV, Kang MJ. Advancements in pulse gas metal arc welding. J Mater Proc Tech. 2005;164-165:1113–1119.
   Web of Science ®Google Scholar
• Ghosh PK, Gupta PC, Goyal VK. Stainless steel cladding of structural steel plate using the pulsed current GMAW process. Weld J. 1998;77(3):307s–314s.
   Google Scholar
• Prabhu R, Alwarsamy T. Effect of process parameters on ferrite number in cladding of 317L stainless steel by pulsed MIG welding. J Mech Sci Technol. 2017;31(3):1341–1347.
   Web of Science ®Google Scholar
• Shahi AS, Pandey S. Effect of auxiliary preheating of the filler wire on quality of gas metal arc stainless steel claddings. J Mater Eng Perform. 2008;17(1):30–36.
   Web of Science ®Google Scholar
• Tosto S, Nenci F, Jiandong H. Microstructure and tensile properties of AISI 316 stainless steel electron-beam cladded on C40 mild steel. J Mater Sci. 1994;29(22):5852–5858.
   Web of Science ®Google Scholar
• Anjos MA, Vilar R, Qiu YY. Laser cladding of ASTM S31254 stainless steel on a plain carbon steel substrate. Sur Coat Tech. 1997;92(1–2):142–149.
   Web of Science ®Google Scholar
• Li R, Ferreira MGS, Anjos MA, et al. Localized corrosion of laser surface cladded UNS S31254 superaustenitic stainless steel on mild steel. Sur Coat Tech. 1997;88(1–3):90–95.
   Web of Science ®Google Scholar
• Rashid RR, Abaspour S, Palanisamy S, et al. Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrate. Sur Coat Tech. 2017;327:174–184.
   Web of Science ®Google Scholar
• Marques MJ, Ramasamy A, Batista AC, et al. Effect of heat treatment on microstructure and residual stress fields of a weld multilayer austenitic steel clad. J Mater Proc Tech. 2015;222:52–60.
   Web of Science ®Google Scholar
• Kannan T, Abraham CC. Effects of gas metal arc welding parameters on weld deposit area of stainless steel claddings. J Manu Sci Prod. 2009;10:123–136.
   Google Scholar
• Rahman Rashid RA, Javed MA, Barr C, et al. Effect of in situ tempering on the mechanical, microstructural and corrosion properties of 316L stainless steel laser-cladded coating on mild steel. Int J Adv Manuf Technol. 2021;117(9-10):2949–2958.
   Web of Science ®Google Scholar
• Deqing W, Ziyuan S, Ruobin Q. Cladding of stainless steel on aluminum and carbon steel by interlayer diffusion bonding. Scrip Mater. 2007;56(5):369–372.
   Web of Science ®Google Scholar
• Dhib Z, Guermazi N, Ktari A, et al. Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates. Mater Sci Eng. 2017;696:374–386.
   Google Scholar
• Zhang Z, Farahmand P, Kovacevic R. Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laser. Mater Des. 2016;109(11):686–699.
   Google Scholar
• da Luz FS, Pinheiro WA, Monteiro SN, et al. Mechanical properties and microstructural characterization of a novel 316L austenitic stainless steel coating on A516 Grade 70 carbon steel weld. J Mater Res Tech. 2020;9(1):636–640.
   Google Scholar
• Prasanna Nagasai B, Malarvizhi S, Balasubramanian V. Mechanical properties of wire arc additive manufactured carbon steel cylindrical component made by cold metal transfer arc welding process. Mater Test. 2022;64(2):260–271.
   Web of Science ®Google Scholar
• Prasanna Nagasai B, Malarvizhi S, Balasubramanian V. Effect of welding processes on mechanical and metallurgical characteristics of carbon steel cylindrical components made by wire arc additive manufacturing (WAAM) technique. CIRP J Manu Sci Tech. 2022;36(1):100–116.
   Google Scholar
• Prasanna Nagasai B, Malarvizhi S, Balasubramanian V. Mechanical properties and microstructural characteristics of wire arc additive manufactured 308L stainless steel cylindrical components made by gas metal arc and cold metal transfer arc welding processes. J Mater Proc Tech. 2022;307(9):1–20.
   Google Scholar
• Prasanna Nagasai B, Srikanth S, Ranga Babu JA. Mechanical properties of AA 7075-nano ZrO2 reinforced matrix composites. In: Voruganti H, Kumar K, Krishna P, Jin X, editors. Advances in applied mechanical engineering. Lecture notes in mechanical engineering. Singapore: Springer; 2020. p. 921–928.
   Google Scholar
• Prasanna Nagasai B, Anusha CH, Rajesh A. Study on mechanical properties of Al06061/ZrO2 reinforced metal matrix composites. Mater Today. 2021;47(14):4552–4557.
   Google Scholar
• Stanzel K. Pulsed GMAW cuts cycle time by 600 percent. Weld Des Fabr. 2001;74(4):85–87.
   Google Scholar
• Tippins J. Box Beam fabrication using pulsed MIG process. Metal Constr Brit Welding J. 1970;2(5):547–555.
   Google Scholar
• Abioye TE, Zuhailawati H, Azlan MAI, et al. Effects of SiC additions on the microstructure, compressive strength and wear resistance of Sn-Sb-Cu bearing alloy formed via powder metallurgy. J Mater Res Tech. 2020;9(6):13196–13205.
   Google Scholar
• Abioye TE, Zuhailawati H, Anasyida AS, et al. Enhancing the surface quality and tribomechanical properties of AA 6061-T6 friction stir welded joints reinforced with varying SiC contents. J Mater Eng Perform. 2021;30(6):4356–4369.
   Web of Science ®Google Scholar
• Prasanna Nagasai B, Malarvizhi S, Balasubramanian V. Characterisation of a wire arc additive manufactured 308L stainless steel cylindrical component. Mater Test. 2022;64(10):1397–1409.
   Web of Science ®Google Scholar
• Prasanna Nagasai B, Malarvizhi S, Balasubramanian V. A study on tensile properties and microstructural characteristics of wire arc additive manufactured low carbon steel cylindrical components. Weld Int. 2022;36(8):443–454.
   Google Scholar