107
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

Investigation and multi-objective optimization of friction stir welding of AA7075-T651 plates

, ORCID Icon &
Pages 68-78 | Received 12 Dec 2022, Accepted 02 Feb 2023, Published online: 15 Feb 2023

References

  • Costa JDM, Jesus JS, Loureiro A, et al. Fatigue life improvement of MIG welded aluminium T-joints by friction stir processing. Int J Fatigue. 2014;61:244–254.
  • Threadgill PL, Leonard AJ, Shercliff HR, et al. Friction stir welding of aluminium alloys. Int Mater Rev. 2009;54(2):49–93.
  • Mehdi H, Sharma S, Anas M, et al. The influences of variation of copper content on the mechanical properties of aluminium alloy. Int J Mater Sci Innovations. 2015;3(3):74–86.
  • Zhao Y, Yang Z, Domblesky JP, et al. Investigation of through thickness microstructure and mechanical properties in friction stir welded 7N01 aluminum alloy plate. Mater Sci Eng A. 2019;760:316–327.
  • Baragetti S, D’Urso G. Aluminum 6060-T6 friction stir welded butt joints: fatigue resistance with different tools and feed rates. J Mech Sci Technol. 2014;28(3):867–877.
  • Deng C, Wang H, Gong B, et al. Effects of microstructural heterogeneity on very high cycle fatigue properties of 7050-T7451 aluminum alloy friction stir butt welds. Int J Fatigue. 2016;83:100–108.
  • Dorbane A, Ayoub G, Mansoor B, et al. Effect of temperature on microstructure and fracture mechanisms in friction stir welded Al6061 joints. J Mater Eng Perform. 2017;26(6):2542–2554.
  • De Geuser F, Malard B, Deschamps A. Microstructure mapping of a friction stir welded AA2050 Al-Li-Cu in the T8 state. Philos Mag. 2014;94(13):1451–1462.
  • Peng Y, Changbin S, Yadong Z, et al. Comparison of electrochemical behaviors between FSW and MIG joints for 6082 aluminum alloy. Rare Metal Mater Eng. 2017;46(2):344–348.
  • Darzi Naghibi H, Shakeri M, Hosseinzadeh M. Neural network and genetic algorithm based modeling and optimization of tensile properties in FSW of AA 5052 to AISI 304 dissimilar joints. Trans Indian Inst Met. 2016;69(4):891–900.
  • Vahdati M, Moradi M, Shamsborhan M. Modeling and optimization of the yield strength and tensile strength of Al7075 butt joint produced by FSW and SFSW using RSM and desirability function method. Trans Indian Inst Met. 2020;73(10):2587–2600.
  • Bhushan RK, Sharma D. Optimization of parameters for maximum tensile strength of friction stir welded AA6082/Si3N4 and AA6082/SiC composite joints. Silicon. 2020;12(5):1195–1209.
  • Palanivel R, Mathews PK, Murugan N. Optimization of process parameters to maximize ultimate tensile strength of friction stir welded dissimilar aluminum alloys using response surface methodology. J Cent South Univ. 2013;19:2929–2938.
  • Venkateswarlu D, Nageswara Rao P, Mahapatra MM, et al. Processing and optimization of dissimilar friction stir welding of AA 2219 and AA 7039 alloys. J Mater Eng Perform. 2015;24(12):4809–4824.
  • Padmanaban R, Vaira Vignesh R, Povendhan AP, et al. Optimizing the tensile strength of friction stir welded dissimilar aluminium alloy joints using particle swarm optimization. Mater Today Proc. 2018;5(11):24820–24826.
  • Senthil SM, Parameshwaran R, Ragu Nathan S, et al. A multi-objective optimization of the friction stir welding process using RSM-based-desirability function approach for joining aluminum alloy 6063-T6 pipes. Struct Multidiscip Optim. 2020;62:1117–1133.
  • Kasman Ş. Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754-H111. Int J Adv Manuf Technol. 2013;68(1–4):795–804.
  • Alkayem NF, Parida B, Pal S. Optimization of friction stir welding process parameters using soft computing techniques. Soft Comput. 2017;21(23):7083–7098.
  • Ma Z, Li Q, Ma L, et al. Process parameters optimization of friction stir welding of 6005A-T6 aluminum alloy using Taguchi technique. Trans Indian Inst Met. 2019;72(7):1721–1731.
  • Rajakumar S, Balasubramanian V. Multi-response optimization of friction-stir-welded AA1100 aluminum alloy joints. J Materi Eng Perform. 2012;21(6):809–822.
  • Shojaeefard MH, Akbari M, Asadi P. Multi objective optimization of friction stir welding parameters using FEM and neural network. Int J Precis Eng Manuf. 2014;15(11):2351–2356.
  • Gaikwad VS, Chinchanikar S. Investigation on surface roughness, ultimate tensile strength, and microhardness of friction stir welded AA7075-T651 joint. Mater Today Proc. 2021;46:8061–8065.
  • Chinchanikar S, Gharde S, Gadge M. Investigation of tool forces, weld bead micro-hardness and surface roughness during friction stir welding of aluminium 6063 alloy. Adv Mater Process. Technol. 2022;8(sup 1):231–239.
  • Zhang J, Upadhyay P, Hovanski Y, et al. High-speed friction stir welding of AA7075-T6 sheet: microstructure, mechanical properties, micro-texture, and thermal history. Metall Mater Trans A. 2018;49(1):210–222.
  • Chinchanikar SS, Gaikwad VS. State of the art in friction stir welding and ultrasonic vibration-assisted friction stir welding of similar/dissimilar aluminum alloys. J Comput Appl Res Mech Eng. 2021;11(1):67–100.
  • Memon S, Fydrych D, Fernandez AC, et al. Effects of FSW tool plunge depth on properties of an Al-Mg-Si alloy T-joint: thermomechanical modeling and experimental evaluation. Materials. 2021;14(16):4754.
  • Motalleb-Nejad P, Saeid T, Heidarzadeh A, et al. Effect of tool pin profile on microstructure and mechanical properties of friction stir welded AZ31B magnesium alloy. Mater Des. 2014;59:221–226.
  • Fuller CB, Mahoney MW, Calabrese M, et al. Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds. Mater Sci Eng A. 2010;527(9):2233–2240.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.