Multi-criteria optimization of TIG welding process parameters on AISI 409M stainless steel by Grey Taguchi method

References

• Taban E. Evaluation of dissimilar welds between ferritic stainless steel modified 12% Cr and carbon steel S355. Am Weld Soc Weld Res. 2012;8:291–297.
   Google Scholar
• Taban E. Effect of the consumable on the properties of gas metal arc welded EN 1.4003-type stainless steel. Am Weld Soc Weld Res J. 2012;91:213–221.
   Web of Science ®Google Scholar
• Ramkumar KD, Chandrasekhar A, Singh AK, et al. Comparative studies on the weldability, microstructure and tensile properties of autogeneous TIG welded AISI 430 ferritic stainless steel with and without flux. J Manuf Process. 2015;20:54–69.
   Web of Science ®Google Scholar
• Kumar B, Bag S, Mahadevan S, et al. On the interaction of microstructural morphology with residual stress in fiber laser welding of austenitic stainless steel. CIRP J Manuf Sci Technol. 2021;33:158–175.
   Web of Science ®Google Scholar
• Ghosh N, Rudrapati R, Pal PK, et al. Parametric optimization of gas metal arc welding process by using Taguchi method on ferritic stainless steel AISI409. Mater Today Proc. 2017;4(2):2213–2221.
   Google Scholar
• Mallaiah G, Kumar A, Ravinder Reddy P, et al. Influence of grain refining elements on mechanical properties of AISI 430 ferritic stainless steel weldments – Taguchi approach. Mater Des. 2012;36:443–450.
   Web of Science ®Google Scholar
• Shanmugam K, Lakshminarayanan AK, Balasubramanian V. Tensile and impact properties of shielded metal arc welded AISI 409M ferritic stainless steel joints. J Mater Sci Technol. 2009;25:181–186.
   Web of Science ®Google Scholar
• Cho H-H, Han HN, Hong S-T, et al. Microstructural analysis of friction stir welded ferritic stainless steel. Mater Sci Eng A. 2011;528(6):2889–2894.
   Web of Science ®Google Scholar
• Villaret V, Deschaux-Beaume F, Bordreuil C, et al. Influence of filler wire composition on weld microstructures of a 444 ferritic stainless steel grade. J Mater Process Technol. 2013;213(9):1538–1547.
   Web of Science ®Google Scholar
• Ambade SP, Sharma A, Patil AP, et al. Effect of welding processes and heat input on corrosion behaviour of ferritic stainless steel 409M. Mater Today Proc. 2021;41:1018–1023.
   Google Scholar
• Ambade S, Tembhurkar C, Patil AP, et al. Shielded metal arc welding of AISI 409M ferritic stainless steel: study on mechanical, intergranular corrosion properties and microstructure analysis. World J Eng. 2022;19(3):266–273.
   Web of Science ®Google Scholar
• Ahmed MMZ, El-SayedSeleman M, Shazly M, et al. Microstructural development and mechanical properties of friction stir welded ferritic stainless steel AISI 409. J Mater Eng Perform 2019;28:6391–6406.
   Web of Science ®Google Scholar
• Anttila S, Karjalainen P, Lantto S. Mechanical properties of ferritic stainless steel welds in using type 409 and 430 filler metals. Weld World. 2013;57:335–347.
   Web of Science ®Google Scholar
• Akita M, Uematsu Y, Kakiuchi T, et al. Joint microstructures, mechanical properties and fatigue behaviour of ferritic stainless steel SUS 430 welds with different filler metals. Weld Int. 2018;32(6):427–435.
   Google Scholar
• Pal S, Malviya SK, Pal SK, et al. Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method. Int J Adv Manuf Technol. 2009;44(11–12):1250–1260.
   Web of Science ®Google Scholar
• Tarng YS, Juang SC, Chang CH. The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing. J Mater Process Technol. 2002;128(1–3):1–6.
   Web of Science ®Google Scholar
• Kim IS. A study on the pre-diction of process parameters in the gas-metal arc welding (GMAW) of mild steel using Taguchi methods. Mater Sci Forum. 2003;2003:235–238.
   Google Scholar
• Choudhury N. Design optimization of process parameters for TIG welding based on Taguchi method. Int J Curr Eng Technol. 2013;2:12–16.
   Google Scholar
• Kumar N, Rudrapati R, Pal PK. Multi-objective optimization in through laser transmission welding of thermoplastics using grey based Taguchi method. Procedia Mater Sci. 2014;5:2178–2187.
   Google Scholar
• Murugan N, Parmar RS. Effects of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel. J Mater Process Technol. 1994;41(4):381–398.
   Web of Science ®Google Scholar