References
- Bhattacharya D. Liquid metal embrittlement during resistance spot welding of Zn-coated high-strength steels. Mater Sci Technol. 2018;34(15):1809–1829.
- Razmpoosh MH, Biro E, Chen DL, et al. Liquid metal embrittlement in laser lap joining of TWIP and medium-manganese TRIP steel: the role of stress and grain boundaries. Mater Character. 2018;145:627–633.
- Beal C, Kleber X, Fabregue D, et al. Liquid zinc embrittlement of twinning-induced plasticity steel. Scrip Mater. 2012;66(12):1030–1033.
- Fernandes PJL, Clegg RE, Jones DRH. Failure by liquid metal-induced embrittlement. Eng Failure Analysis. 1994;1(1):51–63.
- Bhattacharya D, Cho L, Marshall D, et al. Liquid metal embrittlement susceptibility of two Zn-coated advanced high-strength steels of similar strengths. Mater Sci Eng A. 2021;823:141569.
- Razmpoosh MH, Macwan A, Biro E, et al. Liquid metal embrittlement in laser beam welding of Zn-coated 22MnB5 steel. Mater Design. 2018;155:375–383.
- Beal C. Mechanical behavior of a new automotive high manganese TWIP steel in the presence of liquid zinc [dissertation]. INSA de Lyon; 2011.
- Jung G, Woo IS, Suh DW, et al. Liquid Zn assisted embrittlement of advanced high-strength steels with different microstructures. Met Mater. Int. 2016;22(2):187–195.
- Ina K, Koizumi H. Penetration of liquid metals into solid metals and liquid metal embrittlement. Mater Sci Eng A. 2004;387–389:390–394.
- Beal C, Kleber X, Fabregue D, et al. Embrittlement of a zinc-coated high manganese TWIP steel. Mater Sci Eng A. 2012;543:76–83.
- Ashiri R, Shamanian M, Salimijazi HR, et al. Liquid metal embrittlement-free welds of Zn-coated twinning induced plasticity steels. Scrip Mater. 2016;114:41–47.
- DiGiovanni C, Biro E, Zhou NY. Impact of liquid metal embrittlement cracks on resistance spot weld static strength. Sci Technol Weld Join. 2019;24(3):218–224.
- DiGiovanni C, Han X, Powell A, et al. Experimental and numerical analysis of liquid metal embrittlement crack location. J Materi Eng Perform. 2019;28(4):2045–2052.
- Ghatei-Kalashami A, Ghassemali E, DiGiovanni C, et al. Occurrence of liquid-metal-embrittlement in a fully ferritic microstructure. Materialia. 2021;15:101036.
- Kim YG, Kim IJ, Kim JS, et al. Evaluation of surface crack in resistance spot welds of zn-coated steel. Mater Trans. 2014;55(1):171–175.
- Böhne C, Meschut G, Biegler M, et al. Avoidance of liquid metal embrittlement during resistance spot welding by heat input-dependent hold time adaption. Sci Technol Weld Join. 2020;25(7):617–624.
- He L, DiGiovanni C, Han X, et al. Suppression of liquid metal embrittlement in resistance spot welding of TRIP steel. Sci Technol Weld Join. 2019;24(6):579–586.
- DiGiovanni C, Bag S, Mehling C, et al. Reduction in liquid metal embrittlement cracking using weld current ramping. Weld World. 2019;63(6):1583–1591.
- Khosravi A, Halvaee A, Hasannia MH. Weldability of electro galvanized versus galvanized interstitial free steel sheets by resistance seam welding. Mater Design. 2013;44:90–98.
- Pańcikiewicz K, Tuz L, Zielińska-Lipiec A. Zinc contamination cracking in stainless steel after welding. Eng Failure Anal. 2014;39:149–154.
- Razmpoosh MH, Macwan A, Goodwin F, et al. Crystallographic study of the liquid-metal-embrittlement crack path. Mater Lett. 2020;267:127511.
- Zdravecká E, Slota J. Mechanical and microstructural investigations of the laser welding of different zinc coated steel. Metals. 2019;9(1):91.
- Tseng KH, Hsieh ST, Tseng CC. Effect of process parameters of micro-plasma arc welding on morphology and quality in stainless steel edge joint welds. Sci Technol Weld Join. 2003;8(6):423–430.
- Mvola B, Kah P. Effects of shielding gas control: welded joint properties in GMAW process optimization. Int J Adv Manuf Technol. 2017;88(9–12):2369–2387.
- Baruah M, Bag S. Influence of heat input in microwelding of titanium alloy by micro plasma arc. J Mater Proces Technol. 2016;231:100–112.
- Sahu AK, Bag S. Effect of current pulsation on weld microstructure during micro-plasma arc welding of Inconel 718. In: Bag S, Paul CP, Baruah M, editors. Next generation materials and processing technologies. Singapore: Springer; 2021. p. 159–169.
- Dwibedi S, Bag S. Development of micro-plasma arc welding system for different thickness dissimilar austenitic stainless steels. J Inst Eng India Ser C. 2021;102(3):657–671.
- Prasad S, Pal S, Robi PS. Analysis of weld characteristics of micro plasma arc welded thin stainless steel 306 L sheet. J Manufac Proces. 2020;57:957–977.
- Salimi Beni S, Atapour M, Salmani MR, et al. Resistance spot welding metallurgy of thin sheets of zinc-coated interstitial-free steel. Metall Mater Trans A. 2019;50(5):2218–2234.
- Bayraktar E, Kaplan D, Devillers L, et al. Grain growth mechanism during the welding of interstitial free (IF) steels. J Mater Proces Technol. 2007;189(1–3):114–125.
- Frederick R, Grant G. Identification and characterization of the iron-zinc intermetallics formed in galvanneal steel PhD Thesis 1995. p. 1–127.
- Chakraborty G, Pal TK, Shome M. Microstructure development in resistance spot welded galvannealed IF steel sheet. Mater Sci Technol. 2011;27(1):382–386.
- Ashiri R, Haque MA, Ji CW, et al. Supercritical area and critical nugget diameter for liquid metal embrittlement of Zn-coated twining-induced plasticity steels. Scrip Mater. 2015;109:6–10.