Importance of shielding and mechanical characterization of GTAW on Ti-6AL-4V alloy sheet

References

• Williams JC, Boyer RR. Opportunities and issues in the application of titanium alloys for aerospace components. Metals. 2020;10(6):705.
   Web of Science ®Google Scholar
• Karpagaraj A, Parthiban K, Ponmani S. Optimization techniques used in gas tungsten arc welding process–a review. Mater Today Proc. 2020;27:2187–2190.
   Google Scholar
• Sudhakaran R, Vel Murugan V, Sivasakthivel PS, et al. Prediction and optimization of depth of penetration for stainless steel gas tungsten arc welded plates using artificial neural networks and simulated annealing algorithm. Neural Comput Appl. 2013;22(3–4):637–649.
   Web of Science ®Google Scholar
• Ghumman KZ, Ali S, Din EU, et al. Experimental investigation of effect of welding parameters on surface roughness, micro-hardness and tensile strength of AISI 316L stainless steel welded joints using 308L filler material by TIG welding. J Mater Res Technol. 2022;21:220–236.
   Google Scholar
• Karpagaraj A, Siva Shanmugam N, Sankaranarayanasamy K. Some studies on mechanical properties and microstructural characterization of automated TIG welding of thin commercially pure titanium sheets. Mater Sci Eng A. 2015;640:180–189.
   Web of Science ®Google Scholar
• Cui SW, Shi YH, Zhang CS. Microstructure and mechanical properties of TC4 titanium alloy K-TIG welded joints. Trans Nonferrous Met Soc China. 2021;31(2):416–425.
   Web of Science ®Google Scholar
• Zhao J, Zhang J, Gao Q, et al. Research on microstructure evolution and tensile characteristics of Ti6Al4V double lap-fillet joints fabricated by dual laser-beam bilateral synchronous welding. Opt Laser Technol. 2022;145:107472.
   Web of Science ®Google Scholar
• Dewangan S. Effect of heat treatment into tensile strength, hardness and microstructural attributes of TIG welded Ti-6Al-4V titanium alloy. Aust J Mech Eng. 2022. doi: 10.1080/14484846.2022.2059906
   Web of Science ®Google Scholar
• Murthy KK, Sundaresan S. Phase transformations in a welded near-α titanium alloy as a function of weld cooling rate and post-weld heat treatment conditions. J Mater Sci. 1998;33(3):817–826.
   Web of Science ®Google Scholar
• Karpagaraj A, Shanmugam NS, Sankaranarayanasamy K. Studies on mechanical behavior and microstructural analysis of tailor welded blanks of Ti–6Al–4V titanium alloy sheet. J Mater Res. 2016;31(14):2186–2196.
   Web of Science ®Google Scholar
• Liu Z, Welsch G. Effects of oxygen and heat treatment on the mechanical properties of alpha and beta titanium alloys. Metall Trans A. 1988;19(3):527–542.
   Web of Science ®Google Scholar
• Ma J, Welo T. Analytical spring back assessment in flexible stretch bending of complex shapes. Int J Mach Tools Manuf. 2021;160:103653.
   Web of Science ®Google Scholar
• Wasif M, Iqbal SA, Tufail M, et al. Experimental analysis and prediction of springback in v-bending process of high-tensile strength steels. Trans Indian Inst Met. 2020;73(2):285–300.
   Web of Science ®Google Scholar
• Karpagaraj A, Siva Shanmugam N, Suresha B, et al. Studies on spring back effect of TIG welded Ti-6Al-4V sheets. In: Dixit US, Kant R, editors. Simulations for design and manufacturing. Singapore: Springer; 2018. p. 147–171.
   Google Scholar
• Tekaslan Ö, Gerger N, Şeker U. Determination of spring-back of stainless steel sheet metal in “V” bending dies. Mater Des. 2008;29(5):1043–1050.
   Web of Science ®Google Scholar
• Esmaily M, Mortazavi SN, Todehfalah P, et al. Microstructural characterization and formation of α′ martensite phase in Ti–6Al–4V alloy butt joints produced by friction stir and gas tungsten arc welding processes. Mater Des. 2013;47:143–150.
   Web of Science ®Google Scholar
• Balasubramanian TS, Balakrishnan M, Balasubramanian V, et al. Influence of welding processes on microstructure, tensile and impact properties of Ti-6Al-4V alloy joints. Trans Nonferrous Met Soc China. 2011;21(6):1253–1262.
   Web of Science ®Google Scholar
• Wu J, Wang Z, Lin S, et al. Effect of fast-frequency pulsed waveforms on the microstructure and mechanical properties of Ti–6Al–4V alloy welded by FFP-TIG. J Mater Res Technol. 2022;20:516–531.
   Google Scholar
• Li L, Wang S, Huang W, et al. Microstructure and mechanical properties of electron beam welded TC4/TA7 dissimilar titanium alloy joint. J Manuf Processes. 2020;50:295–304.
   Web of Science ®Google Scholar
• Huiqiang W, Jicai F, Jingshan H. Microstructure evolution and fracture behaviour for electron beam welding of Ti-6Al-4V. Bull Mater Sci. 2004;27(4):387–392.
   Web of Science ®Google Scholar
• Balamurugan M, S G, Mohan DG. Influence of tool pin profiles on the filler added friction stir spot welded dissimilar aluminium alloy joints. Mater Res Express. 2021;8(9):096531.
   Web of Science ®Google Scholar
• Fang N, Guo E, Huang R, et al. Effect of welding heat input on microstructure and properties of TC4 titanium alloy ultra-narrow gap welded joint by laser welding with filler wire. Mater Res Express. 2021;8(1):016511. DOI
   Web of Science ®Google Scholar