Tribological analysis of cooling tank assisted hybrid friction stir welded 6061 aluminium alloy

References

• Ahmed MMZ, El-Sayed Seleman MM, Fydrych D, et al. Friction stir welding of aluminum in the aerospace industry: the current progress and state-of-the-art review. Materials. 2023;16(8):2971. doi: 10.3390/ma16082971
   PubMed Web of Science ®Google Scholar
• Çam G, İpekoğlu G. Recent developments in joining of aluminum alloys. Int J Adv Manuf Technol. 2017;91(5–8):1851–1866. doi: 10.1007/s00170-016-9861-0
   Web of Science ®Google Scholar
• Çam G, Javaheri V, Heidarzadeh A. Advances in FSW and FSSW of dissimilar Al-alloy plates. J Adhes Sci Technol. 2023;37(2):162–194. doi: 10.1080/01694243.2022.2028073
   Web of Science ®Google Scholar
• Ipekoglu G, Erim S, Kiral BG, et al. Investigation into the effect of temper condition on friction stir weldability of AA6061 Al-alloy plates. KM. 2021;51(03):155–163. doi: 10.4149/km_2013_3_155
   Google Scholar
• Kashaev N, Ventzke V, Çam G. Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications. J Manuf Processes. 2018;36:571–600. doi: 10.1016/j.jmapro.2018.10.005
   Web of Science ®Google Scholar
• Küçükömeroğlu T, Aktarer SM, Çam G. Investigation of mechanical and microstructural properties of friction stir welded dual phase (DP) steel. IOP Conf Ser: mater Sci Eng. 2019;629(1):012010. doi: 10.1088/1757-899X/629/1/012010
   Google Scholar
• Çam G. Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM). Mater Today Proc. 2022;62:77–85. doi: 10.1016/j.matpr.2022.02.137
   Google Scholar
• İpekoğlu G, Çam G. Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance. IOP Conf Ser Mater Sci Eng. 2019;629(1):012007 doi: 10.1088/1757-899X/629/1/012007
   Google Scholar
• Sengupta K, Singh DK, Mondal AK, et al. Characterization of tool wear in similar and dissimilar joints of MS and SS using EAFSW. Mater Today Proc. 2021;44:3967–3975. doi: 10.1016/j.matpr.2020.10.012
   Google Scholar
• Hasan AF, Bennett CJ, Shipway PH, et al. A numerical methodology for predicting tool wear in friction stir welding. J Mater Process Technol. 2017;241:129–140. doi: 10.1016/j.jmatprotec.2016.11.009
   Web of Science ®Google Scholar
• Dinaharan I, Murugan N. Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites. Mater Sci Eng A. 2012;543:257–266. doi: 10.1016/j.msea.2012.02.085
   Web of Science ®Google Scholar
• Li S, Paidar M, Liu S, et al. Importance of pin number on mechanical properties and wear performance during manufacturing of AA6061/316 surface composite via FSP. Mater Lett. 2022;326:132919. doi: 10.1016/j.matlet.2022.132919
   Web of Science ®Google Scholar
• Gao Z, Chen M, Guo WG, et al. Tool wear characterization and monitoring with hierarchical spatio-temporal models for micro-friction stir welding. J Manuf Processes. 2020;56:1353–1365. doi: 10.1016/j.jmapro.2020.04.031
   Web of Science ®Google Scholar
• Park JW, Jung HY, Jeong W, et al. Microstructure, mechanical properties, and wear properties of friction-stir processed S45C steel. Tribol Int. 2023;186:108646. doi: 10.1016/j.triboint.2023.108646
   Web of Science ®Google Scholar
• Sahlot P, Arora A. Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding. Wear. 2018;408–409:96–107. doi: 10.1016/j.wear.2018.05.007
   Web of Science ®Google Scholar
• Zuo L, Shao W, Zhang X, et al. Investigation on tool wear in friction stir welding of SiCp/Al composites. Wear. 2022;498–499:204331. doi: 10.1016/j.wear.2022.204331
   Web of Science ®Google Scholar
• Adesina AY, Al-Badour FA, Gasem ZM. Wear resistance performance of AlCrN and TiAlN coated H13 tools during friction stir welding of A2124/SiC composite. J Manuf Processes. 2018;33:111–125. doi: 10.1016/j.jmapro.2018.04.019
   Web of Science ®Google Scholar
• Prabhu L, Satish Kumar S. Tribological characteristics of FSW tool subjected to joining of dissimilar AA6061-T6 and Cu alloys. Mater Today: proc. 2020;33:741–745. doi: 10.1016/j.matpr.2020.06.092
   Google Scholar
• Singh DK, Sengupta K, Mondal AK, et al. Characterization of tool wear in i-FSW of AISI 316L material joining. Mater Today Proc. 2021;46:10628–10633. doi: 10.1016/j.matpr.2021.01.375
   Google Scholar
• Arputhabalan JJ, Sangamaeswaran R, Rajeshwaran M, et al. Tribology behaviour of aluminium alloy joints by friction stir processing. Mater Today Proc. 2023. doi: 10.1016/j.matpr.2023.05.584
   Google Scholar
• Akbari M, Rahimi Asiabaraki H, Hassanzadeh E, et al. Simulation of dissimilar friction stir welding of AA7075 and AA5083 aluminium alloys using coupled Eulerian–lagrangian approach. Weld Int. 2023;37(4):174–184. doi: 10.1080/09507116.2023.2205035
   Google Scholar
• Çam G, İpekoğlu G, Tarık Serindağ H. Effects of use of higher strength interlayer and external cooling on properties of friction stir welded AA6061-T6 joints. Sci Technol Weld Joining. 2014;19(8):715–720. doi: 10.1179/1362171814Y.0000000247
   Web of Science ®Google Scholar
• Adesina AY, Iqbal Z, Al-Badour FA, et al. Mechanical and tribological characterization of AlCrN coated spark plasma sintered W–25%re–hfc composite material for FSW tool application. J Mater Res Technol. 2019;8(1):436–446. doi: 10.1016/j.jmrt.2018.04.004
   Google Scholar
• Singh R, Kumar Y. Microstructural analysis of cooling tank-assisted hybrid friction stir welded aluminium alloys: a novel approach. Weld Int. 2023;37(8):445–456. doi: 10.1080/09507116.2023.2251378
   Google Scholar
• Jaiswal R, Singh R, Rizvi S. Prediction of 3-dimensional heat treatment model during the friction stir spot welding of AA 6061. J Eng Res. 2021;11:290–300. doi: 10.36909/jer.12317
   Google Scholar
• Singh R, Kumar Y. Effect of cooling tank embedded fixture design on the thermal analysis of friction stir welded aluminum alloy. J Mater Eng Perform. 2023;32(16):7215–7224. doi: 10.1007/s11665-022-07649-9
   Web of Science ®Google Scholar
• Archard JF. Contact and rubbing of flat surfaces. J Appl Phys. 1953;24(8):981–988. doi: 10.1063/1.1721448
   Web of Science ®Google Scholar
• Patel K, Ghetiya ND, Bharti S. Effect of single and double pass friction stir processing on microhardness and wear properties of AA5083/Al2O3 surface composites. Mater Today Proc. 2022;57:38–43. doi: 10.1016/j.matpr.2022.01.256
   Google Scholar
• Mirjavadi SS, Alipour M, Emamian S, et al. Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance. J Alloys Compd. 2017;712:795–803. doi: 10.1016/j.jallcom.2017.04.114
   Web of Science ®Google Scholar
• Farahmand Nikoo M, Azizi H, Parvin N, et al. The influence of heat treatment on microstructure and wear properties of friction stir welded AA6061-T6/Al2O3 nanocomposite joint at four different traveling speed. J Manuf Processes. 2016;22:90–98. doi: 10.1016/j.jmapro.2016.01.003
   Web of Science ®Google Scholar
• Dubey AM, Kumar A, Yadav AK. Wear behaviour of friction stir weld joint of cast Al (4–10%) Cu alloy welded at different operating parameters. J Mater Process Technol. 2017;240:87–97. doi: 10.1016/j.jmatprotec.2016.09.003
   Web of Science ®Google Scholar
• Gopi V, Sellamuthu R, Arul S. Measurement of hardness, wear rate and coefficient of friction of surface refined Al-Cu alloy. Proc Eng. 2014;97:1355–1360. doi: 10.1016/j.proeng.2014.12.416
   Google Scholar
• Chowdhury I, Sengupta K, Kumar Maji K, et al. Experimental study of tool wears to join Al6026 aluminium alloy by ultrasonic assisted friction stir welding. Mater Today Proc. 2022;50:1221–1225. doi: 10.1016/j.matpr.2021.08.073
   Google Scholar
• Sahlot P, Jha K, Dey GK, et al. Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8%Cr-0.1%Zr alloy. Wear. 2017;378–379:82–89. doi: 10.1016/j.wear.2017.02.009
   Web of Science ®Google Scholar