Friction Stir Spot Welding of A6063S-T5 with Composite Coated Films

References

• Friction Stir Welding – All about FSW, ed. by Japan Welding Society, Sanpo Publishing 2006) (In Japanese).
   Google Scholar
• Fujii H. Friction stir welding of steels. Yosetsu Gakkai Shi. 2008;77(8):731–744. doi: 10.2207/jjws.77.731
   Google Scholar
• Sugimoto Y, Tanaka K, Nishiguchi K. Spot joining of aluminum and dissimilar materials. J Japan Inst Light Metals. 2019;69(2):74–80. doi: 10.2464/jilm.69.74
   Google Scholar
• Tomonaga N, Takano A, Kawanishi S, et al. Material flow promoting effect of the friction stir welding by double spiral tool. Quart J Japan Weld Soc. 2020;38(1):34–40. doi: 10.2207/qjjws.38.34
   Google Scholar
• Yasui T. Friction stir welding between aluminum and dissimilar metal. J Japan Inst Light Metals. 2021;71(5):222–227. doi: 10.2464/jilm.71.222
   Google Scholar
• Ikuta A, Yin Y, North TH. Influence of probe geometry on the mechanical properties of dissmilar Al-alloy friction stir spot welds. Quart J Japan Weld Soc. 2012;30(2):107–115. doi: 10.2207/qjjws.30.107
   Google Scholar
• Tanaka K, Kumagai M, Yoshida H. Dissimilar joining of aluminum alloy and steel sheets by friction stir spot welding. J Japan Inst Light Metals. 2006;56(6):317–322. doi: 10.2464/jilm.56.317
   Google Scholar
• Masaki Y, Ogura T, Ohashi R, et al. Akio Hirose: EŠects of interfacial microstructures on joint strength in friction stir spot welded 6061 aluminum alloy/zinc coated steel joints. J Light Metal Weld. 2013;51–6:25–34.
   Google Scholar
• Atsuhiro H, Shimizu A, Hiroki T Effect of Surface State of, Aichi Science and Technology Center Research Report, et al. 2016 16–19 (In Japanese).
   Google Scholar
• Fujii H, Cui L, Maeda M, et al. Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys. Mat Sci Eng A. 2006;419(1–2):25–31. doi: 10.1016/j.msea.2005.11.045
   Web of Science ®Google Scholar
• Nakada: FSW of aluminum alloys, Welding Technology, September issue (2007), 138–143 (In Japanese).
   Google Scholar
• Yoshihisa K, Toru N, Hiroyuki W, et al. Al/SiCp metal matrix composites fabricated via friction stir power processing. J Jpn Soc Powder Powder Metallurgy. 2015;62(5):258–262. doi: 10.2497/jjspm.62.258
   Google Scholar
• Morisada Y, Fujii H, Nagaoka T, et al. Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31. Mater Sci Eng, A. 2006;433(1–2):50–54. doi: 10.1016/j.msea.2006.06.089
   Web of Science ®Google Scholar
• Naobumi S, Ichinori S. Friction stirprocessing-A new technique for microstructure control of metallic materials. J Japan Inst Light Metals. 2007;57(11):492–498. doi: 10.2464/jilm.57.492
   Google Scholar
• Yoshiaki M, Fujii H. Nanocomposites fabricated by FSP. J the Japan Weld Soc. 2007;76–3:22–26.
   Google Scholar
• Patel VV, Badheka VJ, Kumar A. Effect of velocity index on grain size of friction stir processed Al-Zn-Mg-Cu alloy. Procedia Technol. 2016;23:537–542. doi: 10.1016/j.protcy.2016.03.060
   Google Scholar
• Sato YS, Kokawa H, Enomoto M, et al. Microstructural evolution of 6063 aluminum during friction-stir welding. Metall Mater Trans A. 1999;30(9):2429–2437. doi: 10.1007/s11661-999-0251-1
   Web of Science ®Google Scholar
• Lee W-B, Yeon Y-M, Jung S-B. Mechanical properties related to microstructural variation of 6061 Al alloy joints by friction stir welding. Materials Transactions. 2004;45(5):1700–1705. doi: 10.2320/matertrans.45.1700
   Web of Science ®Google Scholar
• Fujimoto M, Koga S, Abe N, et al. Microstructural analysis of the stir zone of Al alloy produced by friction stir spot welding. Quart J Japan Weld Soc. 2007;25(4):553–559. doi: 10.2207/qjjws.25.553
   Google Scholar
• Sato YS, Kokawa H, Enomoto M, et al. Shigetoshi Jogan and takenori Hashimoto: precipitation sequence in friction stir weld of 6063 aluminum. Metall Mater Trans A. 1999;30(12):3125–3130. doi: 10.1007/s11661-999-0223-5
   Google Scholar
• Koda S. Age-hardening of aluminum alloys. J Japan Instit Light Metals. 1986;36(9):594–606. doi: 10.2464/jilm.36.594
   Google Scholar