Liquid-phase diffusion bonding of Al alloy for casting using formate coated insert sheet

References

• Baek S, Go GY, Park JW, et al. Microstructural and interface geometrical influence on the mechanical fatigue property of aluminum/highstrength steel lap joints using resistance element welding for lightweight vehicles: experimental and computational investigation. J Mater Res Technol. 2022;17:658–678. doi:10.1016/j.jmrt.2022.01.041
   Google Scholar
• Bao Y, Zhou J, Zhang Y, et al. Microstructural and mechanical characteristics of direct laser welding 7075 super hard aluminum alloy/D6AC ultra-high strength alloy structural steel. Mater Lett. 2021;287:129312. doi:10.1016/j.matlet.2021.129312
   Web of Science ®Google Scholar
• Shin S, Park DJ, Yu J, et al. Resistance spot welding of aluminum alloy and carbon steel with spooling process tapes. Metals. 2019;9(4):410. doi:10.3390/met9040410
   Web of Science ®Google Scholar
• Nandan G, Kumar G, Arora KS, et al. MIG and CMT brazing of aluminum alloys and steel: a review. Mater Today Proc. 2022;56:481–488. doi:10.1016/j.matpr.2022.02.166
   Google Scholar
• Fritzsche A, Hilgenberg K, Rethmeier M. Influence of welding parameters on electromagnetic supported degassing of diecasted and wrought aluminum. J Laser Appl. 2022;32(2):022031. doi:10.2351/7.0000064
   Web of Science ®Google Scholar
• He P, Bai X, Zhang H. Microstructure refinement and mechanical properties enhancement of wire and arc additively manufactured 6061 aluminum alloy using friction stir processing post-treatment. Mater Lett. 2023;330:133365. doi:10.1016/j.matlet.2022.133365
   Web of Science ®Google Scholar
• Selvam JDR, Dinaharan I, Mashinini PM. Microstructure and mechanical characterization of Nd: YAG laser beam welded AA6061/10 wt% ZrB2 aluminum matrix composites. Opt Laser Technol. 2021;140:107084. doi:10.1016/j.optlastec.2021.107084
   Web of Science ®Google Scholar
• Kang S, Kim J, Jang Y, et al. Welding deformation analysis, using an inherent strain method for friction stir welded electric vehicle aluminum battery housing, considering productivity. Appl Sci. 2019;9(18):3848. doi:10.3390/app9183848
   Google Scholar
• Hu S, Haselhuhn AS, Ma Y, et al. Zn.Lin: influencing mechanism of inherent aluminum oxide film on coach peel performance of baked Al-Steel RSW. Mater Des. 2021;197:109250. doi:10.1016/j.matdes.2020.109250
   Web of Science ®Google Scholar
• Verma RP, Lila MK. A short review on aluminium alloys and welding in structural applications. Mater Today Proc. 2021;46:10687–10691. doi:10.1016/j.matpr.2021.01.447
   Google Scholar
• Matsuda T, Adachi H, Yoshida R, et al. Formation of interfacial reaction layer for stainless steel/aluminum alloy dissimilar joint in linear friction welding. Mater Today Commun. 2021;26:101700. doi:10.1016/j.mtcomm.2020.101700
   Web of Science ®Google Scholar
• Chen CH, Sun YK, Lai YC, et al. Effect of post-weld heat treatment on the solid-state diffusion bonding of 6061 aluminum alloy. Appl Sci. 2021;11(20):9660. doi:10.3390/app11209660
   Google Scholar
• Kuromitsu Y, Nagatomo Y, Akiyama K, et al. Direct-bonded aluminum on aluminum nitride substrates by transient liquid phase bonding. J Ceram Soc Japan. 2017;125(3):165–167. doi:10.2109/jcersj2.16235
   Web of Science ®Google Scholar
• Zhou Y, Gale WF, North TH. Modelling of transient liquid phase bonding. Int Mater Rev. 1995;40(5):181–196. doi:10.1179/imr.1995.40.5.181
   Web of Science ®Google Scholar
• Assadi H, Shirzadi AA, Wallach ER. Transient liquid phase diffusion bonding under a temperature gradient: modelling of the interface morphology. Acta Mater. 2001;49(1):31–39. doi:10.1016/S1359-6454(00)00307-4
   Web of Science ®Google Scholar
• AlHazaa A, Khan TI, Haq I. Transient liquid phase (TLP) bonding of Al7075 to Ti–6Al–4V alloy. Mater Charact. 2010;61(3):312–317. doi:10.1016/j.matchar.2009.12.014
   Web of Science ®Google Scholar
• Ozawa K, Koyama S, Shohji I. Liquid phase diffusion bonding of A1070 by using metal formate coated Zn sheet. J Phys Conf Ser. 2017;843:012005. doi:10.1088/1742-6596/843/1/012005
   Google Scholar
• Koyama S, Nguyen VP. Solid-State diffusion bonding of titanium by using metal salt coated aluminum sheet. KEM. 2017;741:31–35. doi:10.4028/www.scientific.net/KEM.741.31
   Google Scholar
• Koyama S, Shohji I, Muraoka T. Low temperature solid-state bonding of nickel and tin with formic acid surface modifications. Mater Trans. 2022;63(6):813–820. doi:10.2320/matertrans.MT-MC2022007
   Web of Science ®Google Scholar
• Koyama S, Shohji I, Muraoka T. Solid state bonding of tin and copper by metal salt generation bonding technique using citric acid. Mater Trans. 2022;63(7):987–992. doi:10.2320/matertrans.MT-MC2022014
   Web of Science ®Google Scholar
• Saijo S, Koyama S, Shohji I. Liquid phase diffusion bonding of AC2C/ADC12 aluminum casting alloy by using metal salt coated Zn sheet. Proc Eng. 2017;184:284–289. doi:10.1016/j.proeng.2017.04.096
   Google Scholar
• Liu ZY, Wang LH, Zan YN, et al. Enhancing strengthening efficiency of graphene nano-sheets in aluminum matrix composite by improving interface bonding. Compos Part B. 2020;199:108268. doi:10.1016/j.compositesb.2020.108268
   Web of Science ®Google Scholar
• Shirzadi AA, Assadi H, Wallach ER. Interface evolution and bond strength when diffusion bonding materials with stable oxide films. Surf Interface Anal. 2001;31(7):609–618. doi:10.1002/sia.1088
   Web of Science ®Google Scholar
• Lumley RN, Sercombe TB, Schaffer GB. Surface oxide and the role of magnesium during the sintering of aluminum. Metall Mater Trans A. 1999;30(2):457–463. doi:10.1007/s11661-999-0335-y
   Web of Science ®Google Scholar