In-situ observation of molten brazing filler metal permeating gap

References

• Hanaizumi H, Furihata K, Miyazawa Y, et al. Effect of heating method on void formation at solder joint of each brasses. J Japan Instit Copper. 2018;57:132–135.
   Google Scholar
• Furihata K, Ishiguro M, Osako T, et al. Optimum cooling rate when brazing Pb-free brass Proceedings of the 56th Conference of the Copper Society of Japan. 2016, p. 27–28.
   Google Scholar
• Tajima H, Okada H, Miyazawa Y, et al. Effect of flux boiling on the soldered joint of the brass. J Japan Instit Copper. 2019;58:147–150.
   Google Scholar
• Tajima H, Nakamura Y, Miyazawa Y, et al. Reduction of soldering joint defects using in situ observation. J Japan Instit Copper. 2020;59:349–354.
   Google Scholar
• Tajima H, Yoshida T, Miyazawa Y, et al. Effect of joint design to in–situ observation results of molten solder behavior. J Japan Instit Copper. 2021;60:202–206.
   Google Scholar
• Okada H, Hirono A, Miyazawa Y, et al. Effect of joint gap on void formation during copper alloy brazing. J Japan Instit Copper. 2018;57:127–131.
   Google Scholar
• Sasaki N. Wettability of solder. HYBRIDS. 1992;8(2):21–27. doi:10.5104/jiep1985.8.2_21
   Google Scholar
• Okamoto I. Soldering and brazing. 真空. 1967;10(4):124–130. doi:10.3131/jvsj.10.124
   Google Scholar
• Eustahopoulos N, Hodaj F, Kozlova O. The wetting process in brazing. Woodhead Publishing Limited. 2013; 3–30.
   Google Scholar
• Kohara S. Interface and metal wettability of composite materials. Bull Japan Inst Metals. 1975;14(8):581–587.
   Google Scholar
• Owada K, Tunoda T. Surface wetting. Chem Edu. 2008;56(9):430–435.
   Google Scholar
• Kogi S, Kajiura T, Hanada Y, et al. Wetting and spreading behavior of molten brazing filler metallic alloys on metallic substrate, International Symposium on Interfacial Joining and Surface Technology (IJST2013); 2014.
   Google Scholar
• Basic evaluation of wettability and joint condition by controlled atmosphere heating in brazing Technical Sheet, No. 18-04, Osaka Industrial Technology Research Institute; 2018.
   Google Scholar
• Hayashi, N. Hiraide, T. Mizoguchi, N. Ono: Brazing Ability of an Ni-based Brazing Filler for Ferritic Stainless Steels, NIPPON STEEL TECHNICAL REPORT No. 126; March 2021. p. 99–104.
   Google Scholar
• Sampei H. Evaluation methods of solder wettability. J Surf Finish Soc Japan. 2007;58(4):219–222.
   Google Scholar
• Waetzig K, Schilm J, Mosch S, et al. Influence of the brazing paste composition on the wetting behavior of reactive air brazed (RAB) metal-ceramic joints. Adv Eng Mater. 2020;23(2):200711. doi:10.1002/adem.202000711
   Web of Science ®Google Scholar
• Wang J, Wu Y, Chen W, et al. Wetting behavior of eutectic Au–Sn solder on Ni/Au metallization at different temperatures. J Mater Sci Mater Electron. 2022;33(4):1774–1782. doi:10.1007/s10854-021-07227-0
   Web of Science ®Google Scholar
• Wu Y, Lazaridis K, Krivilyov MD, et al. Effects of gravity on the capillary flow of a molten metal. Colloids Surf A. 2023;656:130400. A doi:10.1016/j.colsurfa.2022.130400
   Google Scholar
• Sun H, Yu G, Chen S, et al. Effect of Zn–Al filler metals on the characteristics of the joint made by the high-frequency induction brazing of 304 stainless steel and 6A02 aluminum. J Manufactur Process. 2021;68(1):961–972. doi:10.1016/j.jmapro.2021.06.030
   Google Scholar
• Cho W-I, Woizeschke P. Numerical study of the effect of workpiece thickness on the interfacial behavior of a molten aluminum droplet on a zinc-coated steel sheet. Int J Adv Manuf Technol. 2022;119(9-10):6245–6254. doi:10.1007/s00170-022-08719-x
   Web of Science ®Google Scholar
• Watanabe T. Fundamentals and applications of brazed weld. Edited by Japan Welding Engineering Society; 2016. p. 20–30.
   Google Scholar
• Nagasaki K, Haruyama S, Kaneko M, et al. Dezincification rate of -brass in a high-temperature vacuum. J Japan Inst Metals. 1969;33(11):1218–1224. doi:10.2320/jinstmet1952.33.11_1218
   Google Scholar
• Itoh I, Togashi M, Hikage T. Hikage: dezincification rate of -brass in a high-temperature vacuum. J Japan Inst Metals. 1974;38(4):294–300. doi:10.2320/jinstmet1952.38.4_294
   Google Scholar
• Brazed Weld Production Technology Welding Newspaper Publishing; 1982. p. 360–367.
   Google Scholar