Experimental investigation and optimization of impact strength during low frequency vibration assisted shielded metal arc welded joints

References

• Krajewski A. Welding processes supported by mechanical vibration. Sci Bull Mech Series Innov Join Techn. 2009;229:33–51. doi: 10.1080/09507116.2014.937606
   Google Scholar
• Qazi MI, Akhtar R, Abas M, et al. Experimental investigation and multi-response optimization of machinability of AA5005H34 using composite desirability coupled with PCA. J Mater. 2020;13(16):3457. doi: 10.3390/ma13163457
   PubMedGoogle Scholar
• Haider S, Quazi M, Bhatt Z, et al. Effect of shielded metal arc welding (SMAW) parame-ters on mechanical properties of low-carbon, mild and stainless-steel welded joints: a review. JATER. 2019;5(5):191–198. doi: 10.20474/jater-5.5.1
   Google Scholar
• Benyounis KY, Olabi AG. Optimization of different welding processes using statistical and numerical approaches – a reference guide. Adv Eng Softw. 2008;39(6):483–496. doi: 10.1016/j.advengsoft.2007.03.012
   Web of Science ®Google Scholar
• Khamari BK, Dash SS, Karak SK, et al. Effect of welding parameters on mechanical and microstructural properties of GMAW and SMAW mild steel joints. Ironmak Steelmak. 2020;47(8):844–851. doi: 10.1080/03019233.2019.1623592
   Web of Science ®Google Scholar
• Liu Z, Fan C, Chen C, et al. Optimization of the microstructure and mechanical properties of the high nitrogen stainless steel weld by adding nitrides to the molten Pool. J Manuf Process. 2020;49:355–364. doi: 10.1016/j.jmapro.2019.12.017
   Web of Science ®Google Scholar
• Lan L, Kong X, Qiu C, et al. Influence of microstructural aspects on impact toughness of multi-pass submerged arc welded HSLA steel joints. Mater Des. 2016;90:488–498. doi: 10.1016/j.matdes.2015.10.158
   Web of Science ®Google Scholar
• Krajewski A, Włosiński W, Chmielewski T, et al. Ultrasonic-vibration assisted arc-welding of aluminum alloys. B Pol Acad Sci-Tech. 2012;60(4):841–852. doi: 10.2478/v10175-012-0098-2
   Web of Science ®Google Scholar
• Kaliyaperumal B. Studies on the effect of vibration on hot cracking and grain size in AA7075 aluminum alloy welding. Int J Eng Sci Technol. 2011;3(1):681–686.
   Google Scholar
• Prihandana G, Mahardika M, Hamdi M, et al. Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes-Taguchi approach. Int J Mach Tools Manuf. 2009;49(12-13):1035–1041. doi: 10.1016/j.ijmachtools.2009.06.014
   Web of Science ®Google Scholar
• Zhenglong L. Melt flow and grain refining in ultrasonic vibration assisted laser welding process of AZ31B magnesium alloy. Opt Laser Technol. 2018;108:409–417. doi: 10.1016/j.optlastec.2018.07.015
   Web of Science ®Google Scholar
• Zlatanovic D. Effect of surface oxide layers in solid-state welding of aluminium alloys – review. STWJ. 2023;28(5):331–351. doi: 10.1080/13621718.2023.2165603
   Google Scholar
• Rao P. Mechanical properties improvement of weldments using vibratory welding system. Proc. Inst. Mech. Eng., Part B. 2014;229(5):776–784. doi: 10.1177/0954405414531248
   Web of Science ®Google Scholar
• Victor A. Impact of low frequency vibration during welding and annealing on microstructure of mild steel butt-welded joints. MAMS. 2020;3(3):366–373. doi: 10.32474/MAMS.2020.03.000162
   Google Scholar
• Ilman MN, Widodo A, Triwibowo NA. Metallurgical, mechanical and corrosion characteristics of vibration assisted gas metal arc AA6061-T6 welded joints. J Adv Join Process. 2022;6:100129. doi: 10.1016/j.jajp.2022.100129
   Google Scholar
• Fen S, Zhen Z, Meng H. Microstructure evolution and grain refinement mechanism of inconel 601H alloy welded joints under compound physical fields of vibration and rapid cooling. MRX. 2020;7(2):026506. doi: 10.1088/2053-1591/ab6e38
   Google Scholar
• Tsai Y-T, Lin P-C, Chen Y-W, et al. Fatigue behavior and microstructural characteristics of a duplex stainless steel weld metal under vibration-assisted welding. Mater Sci Eng A. 2018;721:319–327. doi: 10.1016/j.msea.2018.02.096
   Web of Science ®Google Scholar
• Wu W. Mechanical behavior of the precision component after synchronous vibratory joining. Proc SPIE. 2005:438–445. doi: 10.1117/12.582408
   Google Scholar
• Wen X, Wan M, Huang C, et al. Effect of microstructure on tensile properties, impact toughness and fracture toughness of TC21 alloy. Mater Des. 2019;180:107898. doi: 10.1016/j.matdes.2019.107898
   Web of Science ®Google Scholar
• Tewari S. Effects of oscillation on impact property of weldments. ISIJ. 1999;39(8):809–812. doi: 10.2355/isijinternational.39.809
   Web of Science ®Google Scholar
• Khamari BK, Kumar Sahu P, Biswal BB. Microstructure analysis of arc welded mild steel plates. IOP Conf Ser Mater Sci Eng. 2018;377:012049. doi: 10.1088/1757-899X/377/1/012049
   Google Scholar
• Lu Q, Jin J, Zhang P, et al. Performance of vibration-assisted laser welded joints based on orthogonal experiment design. J oMater Eng Perform. 2021;31(3):2147–2158. doi: 10.1007/s11665-021-06362-3
   Web of Science ®Google Scholar
• Tesfaw T, Singh AP, Gezahegn AM, et al. Optimization of MAG welding process parameters using taguchi design method on dead mild steel used in automotive industry. Int J Syst Assur Eng Manag. 2022;13(1):79–89. doi: 10.1007/s13198-021-01107-w
   Web of Science ®Google Scholar
• Wijoyo W, Mujahid M, Nurhidayat A, et al. The effect of current strength on tensile strength and impact toughness of cast iron welded joints. TJST. 2021;17(2):125–130. doi: 10.36055/tjst.v17i2.11216
   Google Scholar
• Sehgal A. An investigation of variable welding current on impact strength of metal inert gas welded specimen. Mater. Today: proc. 2021;37:3679–3682. doi: 10.1016/j.matpr.2020.10.151
   Google Scholar
• Bade S, Rao S, Rao G. Influence of vibrations in welding process to enhance mechanical properties: a review. IJSRR. 2019;8(2):576–585.
   Google Scholar
• Ranjan R, Jha S. Optimization of welding parameters and microstructure analysis of low frequency vibration assisted SMAW butt welded joints. Int J Interact Des Manuf. 2023; 1–21. doi: 10.1007/s12008-023-01562-8
   Google Scholar
• Ranjan R, Jha S. Effect of vibration on weld quality and properties in vibration assisted welding: a review. IJMHA. 2022;8(2):1–10.
   Google Scholar
• İrsel G. Study of the microstructure and mechanical property relationships of shielded metal arc and TIG welded S235JR steel joints. Mater Sci Eng. 2022;830:142320. doi: 10.1016/j.msea.2021.142320
   Google Scholar
• Venkateshkannan M, Arivazhagan N, Nageswara Rao M, et al. Characterization of weld joints produced by continuous wave and double pulse gas metal arc welding in naval grade high-strength low-alloy steel. Proc Inst Mech Eng. E. 2023;237(5):1808–1818. doi: 10.1177/09544089221126430
   Web of Science ®Google Scholar
• Mostafapour A, Gholizadeh V. Experimental investigation of the effect of vibration on mechanical. Int J Adv Manuf Technol. 2014;70(5-8):1113–1124. doi: 10.1007/s00170-013-5350-x
   Web of Science ®Google Scholar
• Nawaz R, Hussain I, Noor S, et al. The significant impact of the economic sustainability on the cement industry by the assessment of the key performance indicators using taguchi signal to noise ratio. Cogent Eng. 2020;7(1):1810383. doi: 10.1080/23311916.2020.1810383
   Web of Science ®Google Scholar
• Ahmadkhaniha D, Heydarzadeh Sohi M, Zarei-Hanzaki A, et al. Taguchi optimization of process parameters in friction stir processing of pure Mg. JMA. 2015;3(2):168–172. doi: 10.1016/j.jma.2015.04.002
   Google Scholar
• Babu G. Use of L27 orthogonal array with grey taguchi technique to optimize MRR and SR in EDM machining for Al -6082, Al -6061, Al -2014 and mild steel. Int J Eng Res. 2017;11(4):11–21. doi: 10.9790/9622-0711411212
   Google Scholar
• Vijayakumar S. Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. J Adhes Sci. 2023;38:185–202. doi: 10.1080/01694243.2023.2227461
   Web of Science ®Google Scholar
• Singh PK, Kumar SD, Patel D, et al. Optimization of vibratory welding process parameters using response surface methodology. J Mech Sci Technol. 2017;31(5):2487–2495. doi: 10.1007/s12206-017-0446-0
   Web of Science ®Google Scholar
• El-Wazery M, Mabrouk M, Sissy E. A. Optimization of ultrasonic-assisted friction stir welded using taguchi approach. Int J Eng. 2022;35(1):213–219. doi: 10.5829/IJE.2022.35.01A.20
   Google Scholar
• Singh P. Investigation on the effect of mechanical vibration in mild steel weld pool. Manufact Rev. 2019;6:21. doi: 10.1051/mfreview/2019020
   Web of Science ®Google Scholar