Mechanised welding of thick wall austenitic rotating joints in horizontal position on vertical surface

References

• Kominek , J . 1986 . “ ‘Development of technology of automatic welding of collectors of the first circuit to PG bodies.’ ” . In Final report , Ostrava, VZSKG : Engineering and Metallurgical Research Institute .
   Google Scholar
• Tvrdy , M . 1985 . “ ‘Verification of optimised technology of fusion welding of materials for internal structures.’ ” . In Final report , Ostrava, VZSKG : Engineering and Metallurgical Research Institute .
   Google Scholar
• Nemec , J . 1981 . ‘New research results obtained in Finland on solidification cracking of corrosion resisting austenitic steels.’ . Hutnicke Listy ,
   Google Scholar
• 1974 . OP 1513-72: ‘Main principles of welding and deposition of components and structures of nuclear power stations.’ . Translation Ae 3510/Doc, Plzen ,
   Google Scholar
• Vitasek , L . 1983 . “ ‘Welding components of the internal structure of the reactor of VVER 1000 pressure vessel.’ ” . In Final report , Ostrava, VZSKG : Engineering and Metallurgical Research Institute .
   Google Scholar
• Bartak , J . 1984 . ‘Welding austenitic necks to the body of the pressure vessel of VVER 440 MW reactor in assembling.’ . Zvaranie , 33 ( 4 ) : 103
   Google Scholar
• Volobuev , Yu S . 1980 . ‘Selection of flux for automatic welding of sleeves of 08Kh18N10T steel to nozzles.’ . Avt Svarka , 3
   Google Scholar
• 1986 . “ ‘Automatic welding of collectors of a heat carrier to nozzles of the body of PGV 440, PGV 1000 steam generators.’ ” . In A report Podolsk
   Google Scholar
• Pikna , E . . ‘Fluxes for narrow gap welding.’ . Proc conf on ‘Automatic narrow gap submerged-arc welding’ . Bila
   Google Scholar
• Pikna , E . ‘Technical and acceptance conditions for VUZ-3UCr flux.’ , VUZ Bratislava .
   Google Scholar
• 1980 . Certification of VUZ-3UCr flux, test reports, Sigma, Modrany ,
   Google Scholar
• Kremar , J . 1982 . “ ‘Welding of VVER 440 collectors by the narrow gap technique.’ ” . In Final report , Ostrava : VZSKG .
   Google Scholar
• Sevcik , P . 1983 . “ ‘Verification trials of welding 08Kh18N10T steel by automatic narrow gap welding.’ ” . In Final report , Ostrava VZSKG .
   Google Scholar
• Mosny , J . 1985 . “ ‘Development of submerged-arc welding technology of 03Cr18Ni11Mo steel for fittings of nuclear reactors.’ ” . In Final report , VUZ Bratislava .
   Google Scholar
• 1984 . PKJ 567/84: ‘Quality inspection program.’ , Ostrava : VZSKG .
   Google Scholar
• 1975 . “ PK 1514-72: ‘Rules for the inspection of welded joints and deposits of structures and members of nuclear power stations.’ ” . In Translation Ae 3511/Doc Plzen
   Google Scholar
• Kratochvil , P . 1972 . ‘Welds in defects produced by mechanised welding techniques.’ . Zvaranie , 21 ( 9 ) : 275
   Google Scholar
• Storkan , Z . 1986 . ‘Metallographic report.’ , Ostrava : VZSKG .
   Google Scholar
• Kominek , J . 1987 . ‘Evaluating the possibilities of introduction of mechanised welding of the collector-PG VVER 440 body into production.’ , Ostrava : Engineering and Metallurgical Research Institute, VZSKG .
   Google Scholar
• Kopriva , R . 1978 . “ ‘Preparation of welding torches for welding of rotors.’ ” . In Research report , VUZ Bratislava .
   Google Scholar
• Franz , M . 1987 . ‘Controlled thermal conditions in welding heterogeneous joints between Js 1100 nozzles and collectors.’ Report , Ostrava : VZSKG .
   Google Scholar