21
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Effect of oxygen on the toughness of low‐carbon, low‐hydrogen steel weld metal

Pages 683-689 | Published online: 09 Dec 2009

References

  • Ahlblom , B . 1984 . ‘Oxygen and its role in determining weld metal microstructure’ , IIW doc IXJ‐81–84
  • Evans , G M . 1984 . ‘The effects of silicon on the microstructure and properties of C‐Mn all weld metal deposits’ , IIW doc IIA‐630–84
  • Harrison , P L and Farrar , R A . 1981 . ‘Influence of oxygen‐rich inclusions on the phase transformation in high strength low alloy steel weld metals’ . Int Mat Sci , : 16
  • Kenny , B G . 1985 . ‘Ferrite transformation characteristics and CCT diagrams in weld metals’ . Met Constr , 17 (6)
  • Abson , D J and Dolby , R E . 1979 . “ ‘The role of non‐metallic inclusions in ferrite nucleation in carbon steel weld metals’ ” . In Trends in steel and consumables for welding’ , 75 – 101 . The Welding Institute .
  • Choi , C L and Hill , D C . 1978 . ‘A study of microstructural progression in as‐deposited weld metal’ . Weld J , 57 (8)
  • Cochrane , R C . 1983 . ‘Weld metal microstructures‐state of the art review’ . Weld in the World , 21 (1,2)
  • Wegrzyn , J . 1990 . ‘Physics and metallurgy of welding’ , Publ Slask Politechnika .
  • Wegrzyn , J . 1986 . ‘Structure of low carbon steel welds’ . Przegl Spawaln ,
  • Harrison , P L and Farrar , R A . 1987 . ‘Microstructural developments and toughness of C‐Mn and C‐Mn‐Ni weld metals’ . Metal Constr , : 7
  • Court , S A and Pollard , S . 1989 . ‘The development of microstructure in C‐Mn weld deposits’ , IIW doc IIA‐789–89
  • Court , S A and Pollard , G . 1989 . ‘The effects of Mn and Si on the microstructure and properties of SMA steel weld metals’ , IIW doc IIA‐788–89
  • Es‐Souni , M and Beaven , P A . 1990 . ‘Microanalysis of inclusion‐matrix interaces in weld metals’ , IIW doc IIA‐815–90
  • Pargerter , R J . 1983 . ‘Acicular ferrite and inclusions in C‐Mn steel weld metals’ . The Weld Inst Res Bull , 24 (7)
  • Farrar , R A and Watson , M N . 1979 . ‘Effects of oxygen on SA weld metal microstructure’ . Metal Constr , 11 (6)
  • Savage , W F . 1980 . ‘Solidification, segregation and weld imperfections’ . Weld in the World , 18 (5,6)
  • Ricks , R A . 1982 . ‘The nature of acicular ferrite in HSLA steel weld metals’ . Int Mat Sci , : 17
  • Okhita , S . 1984 . ‘The effect of oxide inclusions on the microstructure of Ti‐B containing weld metals’ . Australian Weld J , 29 (3)
  • Kluken , A O and Grong , G . 1989 . ‘Mechanism of inclusion formation in Al‐Ti‐Si‐Mn deoxidised steel weld metals’ . Met Trans , : 20 A and IIW doc II!‐816–90, 1990
  • Devillers , L . . ‘The effect of local concentrations of some elements on the toughness of submerged‐arc welded C‐Mn steel welds’ . Conf on ‘The effects of residual, impurity and microalloying elements on weldability and weld properties’ . publ The Welding Institute .
  • Ito , Y . 1982 . ‘Effects of oxygen on low carbon steel weld metal’ . Metal Constr , 14 (9)
  • Grong , O and Matlock , D K . 1986 . ‘Microstructural developments in mild and low alloy steel weld metals’ . Int Metals Rev , 31 (1)
  • Boniszewski , T . 1979 . ‘Manual metal arc welding‐old process new developments’ . Metallurg Mater Technol , : 11
  • Judson , P and McKeown , D . . ‘Advances in the control of weld metal toughness’ . 2nd int conf on ‘Offshore welding structures’ . publ The Welding Inst .
  • Chin , L L . 1969 . ‘A model for toughness studies of welds’ . Weld J , 48 (7)
  • Bailey , N and Pargeter , R J . 1978 . ‘The influence of flux type on the strength and fracture toughness of mild steel weld metal’ . The Weld Inst Res Rep , 70
  • Tweed , J H and Knott , J F . . ‘Microstructure‐toughness relations in a Co‐Mn weld metal’ . 4th European conf on ‘Fracture’ . Edited by: Maurer , K L and Matzer , F E .
  • Watanabe , I and Kojima , T . 1983 . ‘Effects of titanium, boron and oxygen on notch toughness’ , The Welding Inst .
  • Watanabe . . ‘Applicability of large current MIG arc welding technique’ . Int conf on ‘Welding’ . Osaka : Japan Weld Res Inst .
  • Duren , C F . 1983 . ‘Toughness properties in two‐pass welds. The effects of residual, impurity and microalloying elements on weldability and weld properties’ , The Weld Inst . Paper 34
  • John , R . 1978 . ‘The control of MMA weld metal notch toughness’ . Indian Weld J , 10 (2)
  • Blake , P D . 1979 . ‘Oxygen and nitrogen in steel weld metals’ . Weld Res Int , 9 (1)
  • Heuschkel , J . ‘Weld metal selection and control’ . Weld J , 52 (1) 1973
  • Tuliani , S S . 1969 . ‘Notch toughness of commercial submerged arc weld metal’ . Weld and Metal Fab , 37 (4)
  • Evans , G M . 1989 . ‘The effect of nickel on the microstructure and properties of C‐Mn all weld metal deposits’ , IIW doc IIA‐791–89
  • Aleksieyev , A A . 1990 . ‘Effect of nickel and manganese on structure and properties of multilayer weld metal’ , IIW doc IIA‐811 ‐90
  • Losano , L G . 1989 . ‘Effect of the use of different types of wires on the microstructure and mechanical properties of basic electrode deposits’ , IIW doc IIA‐792–89
  • Wegrzyn , T . . ‘The effect of manganese and nickel on the properties and structure of welds deposited by coated electrodes’ . ‘Proc welding conference’ . publ Politechnika Czestochowka .
  • Wegrzyn , T . . ‘Properties of weld metals from high duty coated electrodes’ . ‘Proc welding conference’ . publ Politchnika Czestochowka .
  • Ito , Y . 1982 . ‘Effects of oxygen on low carbon steel weld metal’ . Metal Constr , 14 (9)

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.